Effects of Processing Method and Nanofiller Size on Mechanical Properties of Biomedical Thermoplastic Polyurethane (TPU) Nanocomposites

Abstract:

The effects of processing method and nanofiller size on mechanical performance of biomedical thermoplastic polyurethane (TPU)-organosilicate nanocomposites were examined. High energy milled organofluoromica nanofillers having reduced platelet aspect ratio and tactoid size were produced in order to obtain an overall better dispersion and more efficient TPU-organofluoromica nanocomposite reinforcement. Regardless the processing method, the lower aspect ratio milled nanofillers resulted in improved quality of dispersion and delamination when incorporated into the TPU and hence induced greater mechanical properties as compared to the non-milled nanofiller. However, the high temperature applied in melt compounding process might induce some degree of degradation of the dual surfactants employed, producing free amines and alkenes that can subsequently reduce the molecular weight of the TPU. Therefore, the expected larger increases in mechanical properties of melt blended TPU nanocomposites were not observed.

• Periodical: Advanced Materials Research (Volume 911)
• Pages: 115-119
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.911.115
• Online since: March 2014
• Authors: Azlin Fazlina Osman*, Grant Edwards, Darren Martin
• Keywords: Mechanical Property, Nanocomposite, Processing, Thermoplastic Polyurethane

References

[1] M. Szycher, Szycher's handbook of polyurethanes, 2nd Edition. CRC Press: Boca Raton, Florida (2012) 354.

[2] A.F. Osman, et al., Engineered nanofillers: impact on the morphology and properties of biomedical thermoplastic polyurethane nanocomposites. RSC Advances, 24 (2012) 9154-9164.

DOI: 10.1039/c2ra21420b

[3] A.F. Osman, et al., Structure–Property Relationships in Biomedical Thermoplastic Polyurethane Nanocomposites. Macromolecules, 45 (2012) 198-210.

[4] A.F. Osman, Biomedical Thermoplastic Polyurethane Nanocomposites: Structure-Property Relationships. PhD thesis, University of Queensland, (2013).

[5] B. Finnigan, The morphology and properties of thermoplastic polyurethane nanocomposites. PhD thesis, University of Queensland, (2005).

[6] F. Perrin-Sarazin, M. Sepehr, S. Bouaricha, J. Denault, Potential of ball milling to improve clay dispersion in nanocomposites. J. Poly. Eng. & Sci. 49 (2009) 651-665.

DOI: 10.1002/pen.21295

[7] B. Finnigan, B. et al., Segmented polyurethane nanocomposites: Impact of controlled particle size nanofillers on the morphological response to uniaxial deformation. Macromolecules, 38 (2005) 7386-7396.

DOI: 10.1021/ma0508911

[8] D. Martin, G. Edwards, Granted International Patent Application AU 2005279677 Polymer composites having particles with mixed organic modifications, (2011).

[9] A.F. Osman, et al., Effect of processing route on the morphology of thermoplastic polyurethane (TPU) nanocomposites incorporating organofluoromica. Advanced Materials Research, 832 (2014) 27-32.

DOI: 10.4028/www.scientific.net/amr.832.27

[10] G, Edwards, et al., Thermal stability analysis of organo-silicates, using solid phase microextraction techniques. Thermochimica Acta, 429 (2005), 13-18.

DOI: 10.1016/j.tca.2004.11.020