Pressure Drop and Water Holdup of Malaysian Crude Oil and Water Two-Phase Flow in Pipes

Abstract:

Understanding the pressure drop and water holdup of crude oil-water flow in a pipe is crucial to many engineering applications. Free water in contact with the pipes wall can cause erosion or corrosion problems. An experimental research was conducted at the Malaysia Petroleum Resources Corporation Institute for Oil and Gas, Universiti Teknologi Malaysia to study the pressure drop and water holdup of the Malaysian waxy crude oil-water flowing in a closed-loop system at ambient condition through a 5.08 cm ID stainless steel horizontal pipeline. In the research work, water cuts were varied from 0 - 90% with mixture velocities ranging from 0.1 0.8 m/s. The research works comprised fluid characterization, pressure drop, and liquid holdup measurement.The investigations proved that pressure drop increased with flow rates, while the water holdup was found to have decreased slightly at higher water cuts due to the presence of emulsion in the crude oil a challenge when using a waxy crude oil in a two phase flow system. The experimental results can be used as a platform to understand better a more complex case of liquid-liquid two phase flow.

• Periodical: Advanced Materials Research (Volumes 931-932)
• Pages: 1248-1252
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.931-932.1248
• Online since: May 2014
• Authors: Issham Ismail*, Shahir Misnan, Ahmad Shamsul Izwan Ismail, Rahmat Mohsin
• Keywords: Crude Oil, Oil-Water Flow, Pressure Drop, Two Phase Flow, Water Flow, Water Holdup

References

[1] Atmaca, S., Sarica, C., Zhang, H.Q., and Al-Sarkhi, A.S. (2009). Characterization of Oil/Water Flows in Inclined Pipes. SPE-115485-PA-P presented at the SPE Annual Technical Conference and Exhibition, Denver, 21-24 September.

DOI: 10.2118/115485-pa

[2] Trallero, J.L., Sarica, C., and Brill, J.P. (1997). A study of Oil/Water Flow Patterns in Horizontal Pipes. SPE 36609 Journal of SPE Production & Facilities. 165-172.

DOI: 10.2118/36609-pa

[3] Mansoori, G.A. (1993). Paraffin/Wax and Waxy Crude Oil. Principles of Nanotechnology- Molecular Based Study of Condensed Matter in Small Systems (pages 1-4). World Scientific.

[4] Russell, T.W.F. and Charles, M.E. (1959). The Effect of the Less Viscous Liquid in the Laminar Flow of Two Immiscible Liquids. Canada Journal Chemical Eng. 37, 18-24.

DOI: 10.1002/cjce.5450370105

[5] Oglesby, K.D. (1979). An Experimental Study on the Effect of oil Viscostiy, Mixture Velocity and Water Fraction on Horizontal Oil-water Flow. Master Thesis. U. of Tulsa, Oklahoma.

[6] Vuong, D.H., Zhang, H.Q., and Li, M. (2009).

[7] Sridhar, S., Zhang, H.Q., Sarica, C., and Pareyra, E. (2011).

[8] Alkaya, B. (2000). Oil-water Flow Patterns and Pressure Gradient in Slightly Inclined Pipes. Master Thesis. University of Tulsa, Oklahoma.

[9] Soleimani, A., Lawrence, C.J., and Hewitt, G.F. (2000). Spatial Distribution of Oil and Water in Horizontal Pipe Flow. SPE 66906 presented at the SPE Annual Technical Conference and Exhibition, Houston, 3-6 October.

DOI: 10.2118/66906-pa

[10] Vielma, M., Atmaca, S., Sarica, C., and Zhang, H.Q. (2007). Characterization of Oil/Water Flows in Horizontal pipes. SPE 109591 presented at the SPE Annual Technical Conference and Exhibition, Anaheim, U.S. A, 11-14 November.

DOI: 10.2118/109591-pa