Study on the Dephosphorization of Semi-Steel in Ladle

Abstract:

Combined with converter semi-steel component of Chengde steel plant, the main components of 100t ladle dephosphorization slag were calculated to propose the initial ratio of dephosphorization slag composition. The dephosphorization slag composition was then further improved by induction furnace dephosphorization. Analysis of dephosphorization rules has been done. The results show that: the dephosphorization effect reaches the best when the percent content of CaO is 35%, the amount of slag is 20kg/t, oxygen flow rate is 4L/min, oxygen blowing time is 4min, and dephosphorization efficiency can reach 56.9%; the order of the elements influencing dephosphorization rate is as follows: oxygen flow rate > slag > CaO > oxygen blowing time. From the experiment, dephosphorization in the ladle can reach the expected effect, which is the new method of hot metal pre-dephosphorization for iron and steel plant using vanadium titanium magnetite.

• Periodical: Advanced Materials Research (Volume 997)
• Pages: 660-665
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.997.660
• Online since: August 2014
• Authors: Yong Hui Han*, Rui Guo Bai, Da Qing Cang, Fu Hai Liu, Hai Gao
• Keywords: Calcium Oxide (CaO), Dephosphorization, Impact Factors, Ladle, Semi-Steel

References

[1] Singh BN. Recent fiends in iron and steelmaking technology[J]. Bulletin of Materials Science, 1 989, 1 2(3): 435-447.

[2] Ueda T，Marukawa K Shirota Y．Sumitomo'S SARP(Sumitomo Alkali Refining or Slag All Recycling)Process[J]．Steel Times Int, 1985, 9(1): 46.

[3] Hikosaka A．Kinetic Study on Dcphosphorization of Hot Metal by Lime·Based Flux Injection in Different Vessels. 1 985: 285—292.

[4] Nakajima Y，Fukami Y，Moriya T，Maruhashi S．A New Injection Process for Dephosphorization of Hot Metal. 1 989: 469—477.

[5] Ohji M．Production and Technology of Iron and Steel in Japan during 1 999[J]. ISIJ international, 2000, 40(6): 529-543.

DOI: 10.2355/isijinternational.40.529

[6] Bai Rui Guo. Vanadium resource extraction research and development and utilization technology of Chengde steel [J]. Metallurgy of Hebei Province, 2012, (02): 7-11.

[7] Qu Xiaoting. Containing vanadium extraction control water and production technology of vanadium steel containing vanadium in Chengde steel [C]. Steelmaking continuous casting technology and academic exchanges by Hebei Provincial Metallurgical Society, 2008: 135-139.

[8] Guo Hanjie. Metallurgical physical chemistry tutorial [M]. Beijing: Metallurgical Industry Press, (2010).

[9] Xu Kuangdi, Xiao Lijun, Gan Yong, et al. A new generation of clean steel production flow theory [J]. Acta metallurgica Sinica, 2012, (01): 2-11.

DOI: 10.3724/sp.j.1037.2011.00496

[10] Wang Xinhua. Iron and steel metallurgy steel [M]. Beijing: Higher Education Press, (2007).