Thermal Crystallization Kinetics of PET, RPET and PEF for Sustainable Packaging

Abstract:

Poly (ethylene 2,5-furandicarboxylate) (PEF) is a bio-based polyester that is the subject of growing interest as a potential alternative to Poly (ethylene terephthalate) (PET) for sustainable packaging. Its excellent gas-barrier properties and reduced carbon footprint make it a promising candidate, but its use at industrial scale requires a solid understanding of how temperature and thermal history affect its mechanical and viscoelastic behavior. In this study, Differential Scanning Calorimetry (DSC), Dynamic Mechanical Thermal Analysis (DMA), and optical microscopy were used to characterize the thermal transitions and crystallization behavior of PEF, compared with PET and recycled PET (rPET). DSC results show that thermal crystallization of PEF proceeds very slowly, a result confirmed by in-situ microscopy. DMA measurements provide complementary information on the evolution of both storage and loss moduli with temperature, highlighting its dependence on crystallinity and thermal history. Together, these thermal and mechanical analyses clarify how PEF’s crystallization behavior affects its thermo-mechanical response. From a processing perspective, the very slow thermal crystallization of PEF is advantageous for stretch blow molding (SBM) process of bottles, as the polymer remains essentially amorphous during heating and crystallizes predominantly under deformation during the fast forming stage.

• Periodical: Defect and Diffusion Forum (Volume 451)
• Pages: 63-73
• DOI: https://doi.org/10.4028/p-ZlRu4c
• Online since: April 2026
• Authors: Evan Gargadennec, Yun Mei Luo*, Eric Monteiro, Luc Chevalier
• Keywords: Crystallization Kinetics, DMA, DSC, PEF, PET, RPET, Thermal Analysis

References

[1] Luan, Q., Li, J., Hu, H., Jiang, X., Zhu, H., Wei, D., Wang, J., & Zhu, J. (2024). Fully Bio‐Based 2,5‐Furandicarboxylic Acid Polyester toward Plastics with Mechanically Robust, Excellent Gas Barrier and Fast Degradation. ChemSusChem, 17 (14), e202400153.

DOI: 10.1002/cssc.202400153

[2] Loos, K., Zhang, R., Pereira, I., Agostinho, B., Hu, H., Maniar, D., Sbirrazzuoli, N., Silvestre, A. J. D., Guigo, N., & Sousa, A. F. (2020). A Perspective on PEF Synthesis, Properties, and End-Life. Frontiers in Chemistry, 8, 585.

DOI: 10.3389/fchem.2020.00585

[3] Forestier, E., Combeaud, C., Guigo, N., & Sbirrazzuoli, N. (2022). A proposal for enhanced microstructural development of Poly(ethylene 2,5-furandicarboxylate), PEF, upon stretching: On strain-induced crystallization and amorphous phase stability improvement. Polymer, 246, 124775.

DOI: 10.1016/j.polymer.2022.124775

[4] Lightfoot, J. C., Buchard, A., Castro-Dominguez, B., & Parker, S. C. (2022). Comparative Study of Oxygen Diffusion in Polyethylene Terephthalate and Polyethylene Furanoate Using Molecular Modeling: Computational Insights into the Mechanism for Gas Transport in Bulk Polymer Systems. Macromolecules, 55(2), 498–510.

DOI: 10.1021/acs.macromol.1c01316

[5] Poulopoulou, N., Smyrnioti, D., Nikolaidis, G. N., Tsitsimaka, I., Christodoulou, E., Bikiaris, D. N., Charitopoulou, M. A., Achilias, D. S., Kapnisti, M., & Papageorgiou, G. Z. (2020). Sustainable Plastics from Biomass: Blends of Polyesters Based on 2,5-Furandicarboxylic Acid. Polymers, 12(1), 225.

DOI: 10.3390/polym12010225

[6] Sousa, A. F., Patrício, R., Terzopoulou, Z., Bikiaris, D. N., Stern, T., Wenger, J., Loos, K., Lotti, N., Siracusa, V., Szymczyk, A., Paszkiewicz, S., Triantafyllidis, K. S., Zamboulis, A., Nikolic, M. S., Spasojevic, P., Thiyagarajan, S., Van Es, D. S., & Guigo, N. (2021). Recommendations for replacing PET on packaging, fiber, and film materials with biobased counterparts. Green Chemistry, 23(22), 8795–8820.

DOI: 10.1039/D1GC02082J

[7] Luo, Y.-M., Chevalier, L., Monteiro, E., & Utheza, F. (2021). Numerical simulation of self heating during stretch blow moulding of PET: Viscohyperelastic modelling versus experimental results. International Journal of Material Forming, 14(4), 703–714.

DOI: 10.1007/s12289-020-01565-w

[8] Nguyen, T. T., Luo, Y.-M., Chevalier, L., Baron, A., Lesueur, F., & Utheza, F. (2023). Numerical Simulation of Infrared Heating and Ventilation before Stretch Blow Molding of PET Bottles. International Journal of Material Forming, 16(4), 37.

DOI: 10.1007/s12289-023-01763-2

[9] Forestier, E., Combeaud, C., Guigo, N., & Sbirrazzuoli, N. (2023). Mechanical Behaviour and Induced Microstructural Development upon Simultaneous and Balanced Biaxial Stretching of Poly(ethylene furandicarboxylate), PEF. Polymers, 15(3), 661.

DOI: 10.3390/polym15030661

[10] Kasmi, N., Papageorgiou, G. Z., Achilias, D. S., & Bikiaris, D. N. (2018). Solid-State Polymerization of Poly(Ethylene Furanoate) Biobased Polyester, II: An Efficient and Facile Method to Synthesize High Molecular Weight Polyester Appropriate for Food Packaging Applications. Polymers, 10(5), 471.

DOI: 10.3390/polym10050471

[11] Ioannidis, R. O., Xanthopoulou, E., Terzopoulou, Z., Zamboulis, A., Bikiaris, D. N., & Papageorgiou, G. Z. (2024). Synthesis and thermal investigation of poly(propylene terephthalate-co-2,5-furan dicarboxylate) copolyesters. Journal of Industrial and Engineering Chemistry, 131, 531–544.

DOI: 10.1016/j.jiec.2023.10.058

[12] Su, K., Luo, W., Xiao, B., Weng, Y., & Zhang, C. (2025). Advancements in the crystallization and regulation of Poly(ethylene 2,5-furandicarboxylate) (PEF): A review. Industrial Crops and Products, 223, 120184.

DOI: 10.1016/j.indcrop.2024.120184

[13] Papageorgiou, G. Z., Tsanaktsis, V., & Bikiaris, D. N. (2014). Synthesis of poly(ethylene furandicarboxylate) polyester using monomers derived from renewable resources: Thermal behavior comparison with PET and PEN. Phys. Chem. Chem. Phys., 16(17), 7946–7958.

DOI: 10.1039/C4CP00518J

[14] Luo, Y., Tantchou Yakam, G., Charlot, R., Chevalier, L., & Savajano, R. (2023). In situ adjustment of a visco hyper elastic model for stretch blow molding process simulation of poly‐ethylene terephthalate bottles. Polymer Engineering & Science, 63(9), 3066–3082.

DOI: 10.1002/pen.26428

[15] Nguyen, T., Luo, Y., Chevalier, L., & Jacquet, B. (2025). Impact of the proportion between virgin and recycled polyethylene terephthalate ( rPET ) on induced microstructure and mechanical stiffness. Polymer Engineering & Science, 65(2), 816-833.

DOI: 10.1002/pen.27044

[16] Luo, Y.-M., Detrez, F., Chevalier, L., Lu, X., & Roland, S. (2023). Multiscale framework for estimation of elastic properties of Poly ethylene terephthalate from the crystallization temperature. Mechanics of Materials, 181, 104617. https://doi.org/10.1016/j.mechmat. 2023.104617.

DOI: 10.1016/j.mechmat.2023.104617

[17] Lauritzen, J. I., & Hoffman, J. D. (1960). Theory of formation of polymer crystals with folded chains in dilute solution. Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry, 64A(1), 73.

DOI: 10.6028/jres.064A.007

[18] Hoffman, J. D., Weeks, J. J., & Murphey, W. M. (1959). Experimental and theoretical study of kinetics of bulk crystallization in poly(chlorotrifluoroethylene). Journal of Research of the National Bureau of Standards Section A: Physics and Chemistry, 63A(1), 67.

DOI: 10.6028/jres.063A.005