The Potential of Fly Ash Based Geopolymer Coatings for Steel Corrosion Protection

Abstract:

Nowadays, researchers are trying to understand whether geopolymers have the potential to be used as a coating material, particularly for protecting metal from corrosion attack. This study aimed to evaluate the effectiveness of fly ash-based geopolymer coatings in protecting steel by immersing the coated samples in a 3.5 wt% NaCl solution for immersion periods of 1, 7, 14, and 28 days. The uncoated steel showed the NaCl color changed to yellowish and became darker with increasing immersion time, indicating severe corrosion on the uncoated steel after 28 days. Surprisingly, with 3mm geopolymer thickness coated on the steel, NaCl solution remain unchanged until 28 days immersion period. The corrosion rate exhibits a very gradual increase, with only 0.112 mm/year recorded after 28 days of immersion. No defects such as blistering, peeling, or cracking were observed on the coated steel. These results indicate that geopolymer holds considerable promise as a coating material, warranting further investigation for its potential applications in this area.

• Periodical: Engineering Chemistry (Volume 10)
• Pages: 35-42
• DOI: https://doi.org/10.4028/p-vhbs2E
• Online since: August 2025
• Authors: Sarini Mat Yaakob*, Suriati Sufian, Nurul Ekmi Rabat
• Keywords: Coating, Corrosion, Geopolymer

References

[1] C. Jiang, A. Wang, X. Bao, T. Ni, and J. Ling, A review on geopolymer in potential coating application: Materials, preparation and basic properties, Journal of Building Engineering. 32 (2020) 101734

DOI: 10.1016/j.jobe.2020.101734

[2] S. Chen, Y. Li, D. Yan, C. Wu, and N. Leventis, Piezoresistive geopolymer enabled by crack-surface coating, Materials Letters. 255 (2019) 126582

DOI: 10.1016/j.matlet.2019.126582

[3] C. Liu, R. Zong, H. Chen, J. Wang, and C. Wu, Comparative study of toxicity for thermoplastic polyurethane and its flame-retardant composites, Journal of Thermoplastic Composite Materials. 32 (2019) 1393-1407

DOI: 10.1177/0892705718798409

[4] H. Wang, P. Feng, Y. Lv, Z. Geng, Q. Liu, and X. Liu, A comparative study on UV degradation of organic coatings for concrete: Structure, adhesion, and protection performance, Progress in Organic Coatings. 149 (2020) 105892

DOI: 10.1016/j.porgcoat.2020.105892

[5] H. Y. Moon, D. G. Shin, and D. S. Choi, Evaluation of the durability of mortar and concrete applied with inorganic coating material and surface treatment system, Construction and Building Materials. 21 (2007) 362-369

DOI: 10.1016/j.conbuildmat.2005.08.012

[6] M. V. Diamanti, A. Brenna, F. Bolzoni, M. Berra, T. Pastore, and M. Ormellese, Effect of polymer modified cementitious coatings on water and chloride permeability in concrete, Construction and Building Materials. 49 (2013) 720-728

DOI: 10.1016/j.conbuildmat.2013.08.050

[7] J.-G. Dai, Y. Akira, F. H. Wittmann, H. Yokota, and P. Zhang, Water repellent surface impregnation for extension of service life of reinforced concrete structures in marine environments: The role of cracks, Cement and Concrete Composites. 32 (2010) 101-109

DOI: 10.1016/j.cemconcomp.2009.11.001

[8] F. Farhana, M. Fazill, H. Kamarudin, A. Rahmat, M. M. A. B. Abdullah, and W. W. Zailani, Effect of Geopolymer Coating on Mild Steel, Solid State Phenomena. 273 (2018) 175-180

DOI: 10.4028/www.scientific.net/ssp.273.175

[9] J. Davidovits, Geopolymer chemistry and applications. Institute Geopolymer, France, (2020)

[10] Y. Zhang, J. Zhang, J. Jiang, D. Hou, and J. Zhang, The effect of water molecules on the structure, dynamics, and mechanical properties of sodium aluminosilicate hydrate (NASH) gel: A molecular dynamics study, Construction and Building Materials. 193 (2018) 491-500

DOI: 10.1016/j.conbuildmat.2018.10.221

[11] J. Temuujin, W. Rickard, M. Lee, and A. van Riessen, Preparation and thermal properties of fire resistant metakaolin-based geopolymer-type coatings, Journal of Non-Crystalline Solids. 357 (2010) 1399-1404

DOI: 10.1016/j.jnoncrysol.2010.09.063

[12] ASTM G31-21, Standard guide for laboratory immersion corrosion testing of metals

[13] J. Zuo, S. Luo, B. Dong, G. Wei, and Y. Wang, Epoxy emulsion modified geopolymer coating for long-term corrosion protection of steel, Case Studies in Construction Materials. 22 (2025) 4252

DOI: 10.1016/j.cscm.2025.e04252

[14] P. Bhardwaj, R. Gupta, D. Mishra, S. K. Sanghi, S. Verma, and S. S. Amritphale, Corrosion and fire protective behavior of advanced phosphatic geopolymeric coating on mild steel substrate, Silicon. 12 (2020) 487-500

DOI: 10.1007/s12633-019-00153-1

[15] N. Yang, C. S. Das, X. Xue, W. Li, and J.-G. Dai, Geopolymer coating modified with reduced graphene oxide for improving steel corrosion resistance, Construction and Building Materials. 342 (2022) 127942

DOI: 10.1016/j.conbuildmat.2022.127942

[16] A. S. Tomar et al., Mechanochemically activated, durable, corrosion protective, advanced geopolymer material, containing gamma-Al2O3 and zinc phosphate, Materials Today Communications. 43 (2025) 111722

DOI: 10.1016/j.mtcomm.2025.111722

[17] J. Han, J. W. Carey, and J. Zhang, Effect of sodium chloride on corrosion of mild steel in CO2-saturated brines, Journal of Applied Electrochemistry. 41 (2011) 741-749

DOI: 10.1007/s10800-011-0290-3

[18] S. Hägg Mameng, A. Bergquist, and E. Johansson, Corrosion of stainless steel in sodium chloride brine solutions, NACE - International Corrosion Conference Series 01/01. (2014)