Making Nano-Porous SiO₂ Insulation through Filter-Pressing of Foamed Slurry

Abstract:

Nano-porous SiO₂ insulation material was made from foamed aqueous slurry of nano-silica powder by filter-pressing. The foamed aqueous slurry mainly consists of hydrophobic SiO2 nano-particles, xonotlite whiskers and glass fiber. The latter two will enhance strength of the insulation material. Rheological properties of the foamed slurry with varying solid mass concentration were studied. The effect of forming pressure on the density and pore size distribution of the nano-porous silica material was investigated. It was found that the foamed slurry with solid concentration less than 17% behaves pseudoplastic as decreasing its apparent viscosity with increasing of shear rate during rheological testing. Homogeneous foamed slurry can be obtained when solid concentration in it is below 7%. Such slurry should be dewatered into solid concentration being of 10-15% before filter-pressing. Rigorously stirring of the concentrated slurry is required before pouring it into a mould, which leads to reducing the viscosity of the slurry and helps uniformly filling mould. During pressing the loading speed should be strictly controlled in order to reaching designed pore size distribution in SiO₂ insulation material. The SiO2 insulation material with apparent density about 0.45g/cm3 and pore size mainly ranging from 10 to 50nm was obtained.

• Periodical: Key Engineering Materials (Volumes 512-515)
• Pages: 319-322
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.512-515.319
• Online since: June 2012
• Authors: Xing Shi, Shi Xi Ouyang, Yu Feng Chen, Mao Qiang Li, Shi Chao Zhang, Wei Wu, Hao Ran Sun, Guang Hai Wang
• Keywords: Foamed Slurry, Nano-Porous, SiO₂ Insulation

References

[1] B. P. Binks, R. Murakami, Phase inversion of particle-stabilized materials from foams to dry water, Nature Materials. 12 (2006) 865-869.

DOI: 10.1038/nmat1757

[2] S. S. Prakash, Ambient-pressure silica aerogel films, Mat. Res. Soc. 371(1995) 205-210.

[3] S. Speil, Low density thermal insulations for aerospace applications, Appl. Materials Research. 3 (1964) 238-242.

[4] S. White, D. Rask, Lightweight supper insulating aerogel/tile composite have potential industrial use, Mater. Technol. 14 (1999) 13-17.

[5] D. A. Soleimani, M.H. Abbasi, Silica aerogel synthesis properties and characterization, Mat. Pro. Tec. 199(2008) 10–26.

[6] J. H. Johnston, J.M. Andrew, B. Thomat, et al, Nano-structured silicas and silicates new materials and their applications in paper, Current Applied Physics. 4(2004) 411-414.

DOI: 10.1016/j.cap.2003.11.061