Formation of the Printing Elements in the Photopolymer Material Used in Flexography

Abstract:

Starting point of this paper is photopolymer printing plate used for flexographic printing. It is used for transfer of the printing ink onto the printing surface during the reproduction process. Photopolymer printing plate consists of several layers: polyester basis, photo sensitive polymer material and LAMS - Laser Ablation Mask. In the platemaking process the photosensitive material, which will form a printing plate, has to be several time exposed to different radiation in order to obtain a functional printability performance. LAMS layer has a role of masking in the exposure process. Upon pre-exposure, LAMS layer has to be removed by laser ablation only at the surfaces where photopolymer printing plate needs to be exposed. After ablation the exposures to UV lights follows and the plate will be finished with chemical removal of the unexposed parts of the polymer. Functionality of the finished printing plate has to be characterised and monitored in every procedure step because the formed image element on the printing plate has a major influence on the quality of the finished printed product. In this paper observing of the changes in the polymer material which is caused by exposure through LAMS layer will be performed. The aim is to measure the surface openings on the LAMS mask and to measure surface coverage (image elements) on the polymer material formed by exposure through the LAMS. Measuring will be made by image analysis software based on microscopic images of the control fields of differing halftone values. It is assumed that there will be a correlation between the LAMS openings and formed image elements on the printing plates. Preliminary results indicate that certain differences in image elements can be detected and are probably the consequence of the different amount of irradiated surface of the polymer material. Since the polymer material which forms the printing plate should be stable in the graphic reproduction process, results of the paper will explain the influence of UV exposures on polymerisation process and on the functional printability performance of the plates.

• Periodical: Key Engineering Materials (Volumes 611-612)
• Pages: 883-891
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.611-612.883
• Online since: May 2014
• Authors: Sanja Mahovic Poljacek*, Tamara Tomasegovic, Tomislav Cigula, Miroslav Gojo, Diana Milcic
• Keywords: Bump Curve, Flexography, LAMS, Photopolymer, Printing Element

References

[1] J. Page Crouch, Flexography Primer, 2nd edition, PIA/GATF Press, Pittsburgh, (2005).

[2] R. Knoll, Photopolymerizable flexographic printing elements comprising SIS/SBS mixtures as binder for the production of flexographic printing plates, Pat. US 6, 531, 263 B2 (2002).

[3] T. Matsubara, R. Oda, Block copolymer composition for flexographic printing plates, Pat. 20, 110, 308, 412 (2011).

[4] H. Kipphan, Handbook of Print Media, Springer, Berlin, Germany, (2001).

[5] R. Bodwell, J. Scharfenberger, Advancing flexography: The technical path rorward, DuPont Packaging Graphics, (2011).

[6] T. Tomašegović, S. Mahović Poljaček, T. Cigula, Modification of flexographic printing plate's surface properties by variation of UVC finishing, XI Symposium on Graphic Arts, Pardubice, 2013, 59.

[7] T.Y. Lee, C.A. Guymon, E. Sonny Jönsson, C.E. Hoyle, The effect of monomer structure on oxygen inhibition of (meth)acrylates photopolymerisation, Polymer, Volume 45, Issue 18, Elsevier, 2004, 6155–6162.

DOI: 10.1016/j.polymer.2004.06.060

[8] O. Brajnović, Adjustment of the photopolymer printing forms to match new qualitative requirements, Master thesis, Faculty of Graphic Arts, University of Zagreb, Zagreb, (2011).

DOI: 10.24867/grid-2018-p18

[9] Information on: http: /www. well. ox. ac. uk/_asset/file/olympus-bx-51-brochure. pdf.

[10] Information on: http: /www. troika-systems. com/English/_downloads/AniCAM m3D_Scanning_Microscope_E. pdf.

[11] ISO standard 12647-6, Graphic technology - Process control for the production of half-tone colour separations, proofs and production prints -Flexographic printing, (2006).

DOI: 10.3403/30122203

[12] T. Tomašegović, S. Mahović Poljaček, T. Cigula, Impact of screen ruling on the formation of the printing elements on the flexographic printing plate, Acta Graphica. 1-2/13, 2013, 1-12.

[13] G. L. Laurent, Analysis of the Correlation Between the Print Quality Required in Flexography and the Tolerances in Materials and Paper Manufacturing in Terms of Printability, Royal Institute of technology, Department of Numerical Analysis and Computer Science, Sweden, (2001).

[14] S. Mahović Poljaček, T. Cigula, T. Tomašegović, Meeting the quality requirements in the flexographic plate making process, Proceedings of the 44rd conference of the International Circle of Educational Institutes for Graphic Arts Technology and Management, Budapest, 2012., 8.