A MIM Route for Producing Ti6Al4V-TiC Composites

Abstract:

Discontinuous reinforced titanium matrix composites have generated significant interest due to their compelling properties such as their specific strength and wear resistance at room and elevated temperatures. For these reasons, these materials have been considered in various applications such as automotive (valve components), aerospace (engine components) and medical devices (implants). Metal injection molding (MIM) has proven to be an efficient near net-shape technology suitable for high volume manufacturing of parts having complex geometries. The MIM technology is particularly attractive for producing composites as the metallic matrix does not go through the liquid state. This helps minimizing the segregation of the hard particles. MIM also reduces the needs for machining. However, the production of titanium components with the MIM process has its own challenges and limitations, such as presence of porosities and coarser microstructures compared to wrought products. The present work introduces the results obtained during the development of a MIM route for producing Ti6Al4V-5wt%TiC composites. The feedstock developed is wax-based and incorporates a pre-alloyed metal powder. The microstructure, mechanical properties at room and elevated temperatures, the wear resistance and the thermal diffusivity of the composites have been characterised. Properties are compared with those of a Ti6Al4V MIM material produced with the same feedstock and process but without TiC as well as with those of wrought Ti6Al4V reported in the literature. The presence of a small amount of TiC promotes densification and grain size refinement and affects the surface finish of the sintered components. Tensile properties of the composites are comparable or better than those of wrought Ti6Al4V (ASTM F1472). Improved mechanical properties compared to unreinforced material are associated to the higher density, finer grain size as well as solution strengthening of the titanium matrix.

• Periodical: Key Engineering Materials (Volume 704)
• Pages: 139-147
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.704.139
• Online since: August 2016
• Authors: Roger Pelletier*, Louis Philippe Lefebvre, Eric Baril
• Keywords: Metal Injection Moulding, Metal Matrix Composites, Titanium

References

[1] Mimoto T., Nakanishi N., Umeda J. and Kondoh K. Mechanical properties and strengthening mechnism of pure Ti powder composite material reinforced with carbon nano-particles. Transaction of JWRI, 40 (2), 63-68 (2011).

[2] Saito T. The automotive application of discontinuously reinforced TiB-Ti composites. JOM, 56 (5), 33-36 (2004).

DOI: 10.1007/s11837-004-0125-3

[3] Tingskog T. New titanium alloy feedstock for high performance MIM. International Conference on Injection Moulding of Metals, Ceramics and Carbides, Tampa, USA, (2015).

[4] Material Properties Handbook: Titanium Alloys, ASM International, (1994).

[5] Tuninetti V. and Habraken A.M. Impact of anisotropy and viscosity to model the mechanical behavior of Ti–6Al–4V alloy. Mat. Sci. and Engineering, A605, pp.39-50 (2014).

DOI: 10.1016/j.msea.2014.03.009

[6] Ferri O.M., Ebel T. and Bormann R. The influence of a small boron addition on the microstructure and mechanical properties of Ti-6Al-4V fabricated by metal injection moulding. Adv. Eng. Materials, 13 (5), 436-447 (2011).

DOI: 10.1002/adem.201000280

[7] Karaduman B., Meydanoglu O., Cimenoglu H. and Kayali, E. Production of titanium carbide reinforced titanium matrix composites via powder metallurgy method. TMS 139th annual meeting and exhibition supplemental proceedings, 3, 617-624 , Seattle, USA, (2010).

[8] Zhu S. J., Mukherji D., Chen W., Lu Y. X., Wang Z. G. and Wahi, R. P. Steady-state creep behavior of TiC particulate reinforced Ti-6Al-4V composite. Mater. Sci. Eng., A256, 301-307 (1998).

DOI: 10.1016/s0921-5093(98)00617-0

[9] Zhang R., Kruszewski J. and Lo J. Microstructure and mechanical properties of TiC particulate reinforced titanium matrix composite made by metal injection moulding. Proceedings of the Light Metals Technology Conference, Québec, Canada, (2007).