Finite Hinge Stiffness and its Effect on the Capacity of a Dry-Stack Masonry Arch Subjected to Hinge Control

Article Preview

Abstract:

With each new earthquake the damages to vaulted masonry and their vulnerability are continuously observed. Understanding the behaviour of these systems continues to increase, and reinforcement strategies and techniques are continually advancing. The application of reinforcement is often done such that the failure of the system is transformed directly from one of stability to strength. This direct transformation overlooks the intermittent stages that exist, and thus provides a partial picture of the system. An experimental campaign was carried out to test the capacity of a dry-stack masonry arch subjected to hinge control and failed through a tilting test. From the experimentation, it was observed that controlling the hinge locations can increase the resistance of the arch while also providing a defined failure mechanism, but the capacity of the system was greatly reduced when compared to numerical results. Investigation into the capacity reduction revealed stable mechanical deformations resulting from a non-rigid reinforced base joint. This work focuses on the relationship between capacity and stable deformations to calculate a rotational stiffness value for the non-rigid reinforced base joint.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

259-266

Citation:

Online since:

August 2019

Export:

Price:

Permissions CCC:

Permissions PLS:

Сopyright:

© 2019 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] E. Bertolesi, G. Milani, F.G. Carozzi, C. Poggi, Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: Numerical analyses. Composite Structures, 187 (2018) 385-402.

DOI: 10.1016/j.compstruct.2017.12.021

Google Scholar

[2] F.G. Carozzi, C. Poggi, E. Bertolesi, G. Milani, Ancient masonry arches and vaults strengthened with TRM, SRG and FRP composites: Experimental evaluation. Composite Structurs, 187 (2018) 466-480.

DOI: 10.1016/j.compstruct.2017.12.075

Google Scholar

[3] S. De Santis, F. Roscini, G. de Felice, Full-scale tests on masonry vaults strengthened with Steel Reinforced Grout. Composites Part B, 141 (2018) 20-36.

DOI: 10.1016/j.compositesb.2017.12.023

Google Scholar

[4] L. Anania, G. D'Agata, Limit Analysis of vaulted structures strengthened by an innovative technology in applying CFRP. Construction and Building Materials 145 (2017) 336-346.

DOI: 10.1016/j.conbuildmat.2017.03.212

Google Scholar

[5] C. Modena, G. Tecchio, C. Pellegrino, F. da Porto, M. Donà, P Zampieri, M.A. Zanini, Reinforced concrete and masonry arch bridges in seismic areas: typical deficiencies and retrofitting strategies. Structure and Infrastructure Engineering, 11:4 (2015) 415-442.

DOI: 10.1080/15732479.2014.951859

Google Scholar

[6] A. Borri, G. Castori, M. Corradi, Intrados strengthening of brick masonry arches with composite maerials. Composites: Part B, 42 (2011) 1164-1172.

DOI: 10.1016/j.compositesb.2011.03.005

Google Scholar

[7] I. Cancelliere, M. Imbimbo, E. Sacco, Experimental tests and numerical modelling of reinforced masonry arches. Eng Struct, 32 (2010) 776-792.

DOI: 10.1016/j.engstruct.2009.12.005

Google Scholar

[8] D.V. Oliveira, I. Basilio, P.B. Lourenço, Experimental Behavior of FRP Strengthened Masonry Arches J. Compos. Constr., 14(3) (2010) 312-322.

DOI: 10.1061/(asce)cc.1943-5614.0000086

Google Scholar

[9] G. Stockdale, V. Sarhosis, G. Milani, Increase in seismic resistance for a dry joint masonry arch subjected to hinge control, 10th IMC Conference Proceedings, International Masonry Society, (2018) 968-981.

DOI: 10.4028/www.scientific.net/kem.817.221

Google Scholar

[10] G. Stockdale, G. Milani, Diagram based assessment strategy for first-order analysis of masonry arches, Journal of Building Engineering, 22 (2019) 122-129.

DOI: 10.1016/j.jobe.2018.12.002

Google Scholar

[11] G. Stockdale, S. Tiberti, D. Camilletti, G. Papa, A. Habieb, E. Bertolesi, G. Milani, S. Casolo, Kinematic collapse load calculator: Circular arches, SoftwareX, 7 (2018) 174-179.

DOI: 10.1016/j.softx.2018.05.006

Google Scholar

[12] G. Stockdale, V. Sarhosis, G. Milani, Seismic Capacity and Multi-Mechanism Analysis for Dry-Stack Masonry Arches Subjected to Hinge Control, Bull Earthq Eng, (2019).

DOI: 10.1007/s10518-019-00583-7

Google Scholar