Transesterification Catalytic Performance of Mechanically Alloyed Eggshell Ash, Magnesium and Aluminum Oxides for Sustainable Biodiesel Production

Abstract:

Use of quicklime as a sole catalyst for transesterification is limited by poor chemical stability and post-reaction recovery. This study investigates the effect of dry milling time on the transesterification catalytic performance (activity and recovery) of mechanically alloyed MgO, Al₂O₃ and eggshell derived quicklime. Raw chicken eggshells were calcined at 900 °C. The resulting flaking eggshell ash was directly mixed and comminuted with MgO and Al₂O₃ in ball milling (BM) machine for 15, 30, 60, 90, 120 and 150 minutes. Each of the catalyst samples was analyzed for surface morphology and particle size distribution, and then utilized for biodiesel production. Analyses of catalyst samples showed that mean particle size reduced, while powder agglomeration advanced with milling time. Optimum catalytic performance was achieved with the composite alloyed for 120 minutes (Z120) and that resulted in fatty acid methyl ester (FAME) yield of 88.4% and catalyst recovery of 98.3%. Sample Z120 was further characterized by TEM, EDX, XRD and BET. Calcination of the composite catalyst enhanced its activity. Dry high energy BM of oxides can be utilized effectively for synthesis of composite catalysts.

• Periodical: Key Engineering Materials (Volume 833)
• Pages: 139-143
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.833.139
• Online since: March 2020
• Authors: Onyeka Stanislaus Okwundu*, Ahmed Hassan El-Shazly, Marwa Farouk El-Kady, Mahmoud Abdelghany Shouman
• Keywords: Biodiesel Production, Catalyst Recovery, Composite Catalyst, Eggshell Ash, Heterogeneous Catalysis, Mechanical Alloy

References

[1] El-Eskandarany MS. Mechanical Alloying for Fabrication of Advanced Engineering Materials. Noyes Publications/Willam Andrew Publishing Norwich, New York, U.S.A.; (2001).

[2] Suryanarayana C, Al-Aqeeli N. Mechanically alloyed nanocomposites. Prog Mater Sci 2013;58:383–502.

DOI: 10.1016/j.pmatsci.2012.10.001

[3] Kouzu M, Kasuno T, Tajika M, Sugimoto Y, Yamanaka S, Hidaka J. Calcium oxide as a solid base catalyst for transesterification of soybean oil and its application to biodiesel production. Fuel 2008;87:2798–806.

DOI: 10.1016/j.fuel.2007.10.019

[4] Ngamcharussrivichai C, Meechan W, Ketcong A, Kangwansaichon K, Butnark S. Preparation of heterogeneous catalysts from limestone for transesterification of vegetable oils—Effects of binder addition. J Ind Eng Chem 2011;17:587–95.

DOI: 10.1016/j.jiec.2011.05.001

[5] Jindapon W, Ngamcharussrivichai C. Heterogeneously catalyzed transesterification of palm oil with methanol to produce biodiesel over calcined dolomite: The role of magnesium oxide. Energy Convers Manag 2018;171:1311–21.

DOI: 10.1016/j.enconman.2018.06.068

[6] Okwundu OS, El-Shazly A, Elkady M. Comparative effect of reaction time on biodiesel production from low free fatty acid beef tallow: a definition of product yield. SN Appl Sci 2019;1.

DOI: 10.1007/s42452-018-0145-1

[7] Tan YH, Abdullah MO, Nolasco-Hipolito C, Taufiq-Yap YH. Waste ostrich- and chicken-eggshells as heterogeneous base catalyst for biodiesel production from used cooking oil: Catalyst characterization and biodiesel yield performance. Appl Energy 2015;160:58–70.

DOI: 10.1016/j.apenergy.2015.09.023

[8] Li H, Wei H-Y, Cui Y, Sang R-L, Bu J-L, Wei Y-N, et al. Synthesis and characterisation of MgAl2O4 nanopowders via nonhydrolytic sol-gel route. J Ceram Soc Japan 2017;125:100–4.

DOI: 10.2109/jcersj2.16297