Reversible Poly Lactic Acid (PLA) Film for Volatile Organic Compounds (VOCs) Gas Sensor

Abstract:

The detection of volatile organic compounds (VOCs) including hydrochloric acid (HCl), acetic acid (CH₃COOH), and ammonia (NH₃) in indoor air is crucial due to human health safety. In this study, halochromic poly lactic acid (PLA) film sensor were prepared. PLA film were fabricated by addition of polyethylene glycol (PEG) and bromocresol purple (BCP) into PLA using solution casting method. Visual observation and mechanical properties of the film were determined as well as its spectral properties to assess the potential of halochromic film as gas sensor. The response of the PLA film to acidic and alkaline gas and its reversibility were tested. It was found that PEG increased the free volume of PLA and made it possible for the PEG and the dye to diffuse and entrap between PLA chains. However, increasing BCP did not have significant impact on the PLA film flexibility or reduced its halochromic sensitivity. The results revealed that the film showed significant effect on NH₃ which the film change from yellow to purple within a second and could also change its color back to yellow in the absence of the VOC. This properties enables wide potential in various applications that requires high sensitivity, rapid response and continuous monitoring.

• Periodical: Key Engineering Materials (Volume 907)
• Pages: 32-37
• DOI: https://doi.org/10.4028/www.scientific.net/KEM.907.32
• Online since: January 2022
• Authors: Siti Amirah Alias, Ku Marsilla Ku Ishak*
• Keywords: Gas Sensor, Halochromic, Poly Lactic Acid, Reversible Sensor

References

[1] R.S. Andre, R.C. Sanfelice, A. Pavinatto, L.H.C. Mattoso, D.S. Correa, Hybrid nanomaterials designed for volatile organic compounds sensors: A review, Materials & Design 156 (2018) 154-166.

DOI: 10.1016/j.matdes.2018.06.041

[2] J. Wang, Q. Zhou, S. Peng, L. Xu, W. Zeng, Volatile Organic Compounds Gas Sensors Based on Molybdenum Oxides: A Mini Review, Frontiers in Chemistry 8(339) (2020).

DOI: 10.3389/fchem.2020.00339

[3] U.S.E.P. Agency, Indoor Air Quality. <https://www.epa.gov/indoor-air-quality-iaq/volatile-organic-compounds-impact-indoor-air-quality>, 2021).

DOI: 10.1111/j.1600-0668.1991.00001.x

[4] G. Zhang, X.L. Feng, B. Liedberg, A.Q. Liu, Gas Sensor for Volatile Organic Compounds Detection Using Silicon Photonic Ring Resonator, Procedia Engineering 168 (2016) 1771-1774.

DOI: 10.1016/j.proeng.2017.02.002

[5] A.H. Jalal, F. Alam, S. Roychoudhury, Y. Umasankar, N. Pala, S. Bhansali, Prospects and Challenges of Volatile Organic Compound Sensors in Human Healthcare, ACS Sensors 3(7) (2018) 1246-1263.

DOI: 10.1021/acssensors.8b00400

[6] A. Nur'aini, I. Oh, Volatile organic compound gas sensors based on methylammonium lead iodide perovskite operating at room temperature, RSC Advances 10(22) (2020) 12982-12987.

DOI: 10.1039/c9ra10703g

[7] Y.K. Park, B.M. Oh, A.R. Jo, J.H. Han, J.Y. Lim, H.J. Oh, S.J. Lim, J.H. Kim, W.S. Lee, Fabrication of Colorimetric Textile Sensor Based on Rhodamine Dye for Acidic Gas Detection, Polymers 12(2) (2020) 431.

DOI: 10.3390/polym12020431

[8] N. Jia Yam, A. Rusli, Z.A. Abdul Hamid, M.K. Abdullah, K.I. Ku Marsilla, Halochromic poly (lactic acid) film for acid base sensor, Journal of Applied Polymer Science 138(13) (2021) 50093.

DOI: 10.1002/app.50093