Anomaly Detection during Thermoplastic Composite Infusion: Monitoring Strategy through Thermal Sensors

Abstract:

Vacuum assisted resin infusion (VARI) processes are widely used for the fabrication of large composite parts. For some years now, wind blades are designed with thermoset composite materials, however, recyclability is often the missing brick. The recent advent of thermoplastic materials such as ELIUM©, developed by ARKEMA, shows the possibility to consider the manufacture of very large parts such as wind turbine blades with recyclable constituents [1]. The French institute IRT Jules Verne is leading the research project ZEBRA, with a consortium of industrials, focusing on different thematics of the manufacturing of wind turbine blades, including process monitoring. In the objective of evaluating the possibility for anomaly detection during the ELIUM© infusion process, an infusion test bench was developed, equipped with different sensors including infrared camera, thermocouples and heat flow sensors. In this work, the thermal sensors are evaluated by the study of several infusion scenarios of plates fabricated under different process conditions and material parameters. Artificial anomalies are imposed into the process to evaluate the potential of these sensors to detect the induced disturbances. A numerical process modelling is developed, compared to the sensor outputs and used to achieve a better understanding of some effects observed during the process.

• Periodical: Key Engineering Materials (Volume 926)
• Pages: 1423-1436
• DOI: https://doi.org/10.4028/p-n27w97
• Online since: July 2022
• Authors: Philippe Le Bot*, Grégoire Lebreton, Nihad Siddig, Pierre Couarraze, Olivier Fouché, Camille Sébastien, Antoine De Fongalland, Fabien Cara, Pierre Gérard
• Keywords: Heat Transfer, Infusion, Monitoring, Sensors, Thermoplastic Composites

References

[1] C. Niggemann, Y. S. Song, J. W. Gillespie, D. Heider, Experimental Investigation of the Controlled Atmospheric Pressure Resin Infusion (CAPRI) Process", Journal of composite materials, vol. 42(11), pp. 1049_1061, (2008).

DOI: 10.1177/0021998308090650

[2] J. Billings, An overview of the SCRIMP technology,, F. tech., TPI Technology, Inc.,(2001).

[3] S. Konstantopoulos, E. Fauster, R. Schledjewski, « Monitoring the production of FRP composites: A review of in-line sensing methods", eXPRESS Polymer Letters Vol.8, No.11 (2014) 823–840, Available online at www.expresspolymlett.com.

DOI: 10.3144/expresspolymlett.2014.84

[4] F. Cara, S. Costantino, Resin Flow Monitoring in composite infusion process. JEC Composites Magazine nr 40 (2008).

[5] F. Cara, B. Taillet, P. Gérard, Preliminary Study of Curing Kinetics and Mechanical Characterization of Reactive Thermoplastic Resins with new Calorimetric Cell Mounted on DMA. Esaform 2019 Conference proceeding.

DOI: 10.1063/1.5112671

[6] N. Han, I. Baran, J. S. M. Zanjani, O. Yuksel, L. L. An, and R. Akkerman, Experimental and computational analysis of the polymerization overheating in thick glass/Elium® acrylic thermoplastic resin composites,, Composites Part B: Engineering, vol. 202, Dec. 2020,.

DOI: 10.1016/j.compositesb.2020.108430

[7] S. F. Gayot, C. Bailly, T. Pardoen, P. Gérard, and F. van Loock, Processing maps based on polymerization modelling of thick methacrylic laminates,, Materials and Design, vol. 196, Nov. 2020,.

DOI: 10.1016/j.matdes.2020.109170

[8] Palmieri et al. - 2021 An Efficient Thermal Cure Profile for Thick Parts Made by Reactive Processing of Acrylic Thermoplastic Composites,.

DOI: 10.3390/jcs5090229