Investigating Sustainable Materials for AEM Electrolysers: Strategies to Improve the Cost and Environmental Impact

Abstract:

In recent years, the EU policy identified the hydrogen as one of the main energy vectors to support the power production from renewable sources. Coherently, electrolysis is suitable to convert energy in hydrogen with no carbon emission and high purity level. Among the electrolysis technologies, the anion exchange membrane (AEM) seems to be promising for the performance and the development potential at relatively high cost. In the present work, AEM electrolysers, and their technological bottlenecks, have been investigated, in comparison with other electrolysers’ technology such as alkaline water electrolysis and proton exchange membranes. Major efforts and improvements are investigated about innovative materials design and the corresponding novel approach as main focus of the present review. In particular, this work evaluated new materials design studies, to enhance membrane resistance due to working cycles at temperatures close to 80 °C in alkaline environment, avoiding the employment of toxic and expensive compounds, such as fluorinated polymers. Different strategies have been explored, as tailored membranes could be designed as, for example, the inclusion of inorganic nanoparticles or the employment of not-fluorinated copolymers could improve membranes resistance and limit their environmental impact and cost. The comparison among materials’ membrane is actually limited by differences in the environmental conditions in which tests have been conducted, thereafter, this work aims to derive reliable information useful to improve the AEM cell efficiency among long-term working periods.

• Periodical: Key Engineering Materials (Volume 962)
• Pages: 81-92
• DOI: https://doi.org/10.4028/p-7Rkv7M
• Online since: October 2023
• Authors: Gabriele Discepoli*, Silvia Barbi, Massimo Milani, Monia Montorsi, Luca Montorsi
• Keywords: Anion Exchange Membrane, Electrode, Electrolysis, Hydrogen

References

[1] European Commission, "Communication from the commission to the european parliament, the council, the european economic and social committee and the committee of the regions - A hydrogen strategy for a climate-neutral Europe," 2020.

DOI: 10.1163/9789004322714_cclc_2020-0164-0816

[2] IEA, "Net Zero by 2050: A Roadmap for the Global Energy Sector," 2021.

[3] IEA, "Global Hydrogen Review 2021," 2021.

DOI: 10.1787/39351842-en

[4] J. Incer-Valverde, L. J. Patiño-Arévalo, G. Tsatsaronis, and T. Morosuk, "Hydrogen-driven Power-to-X: State of the art and multicriteria evaluation of a study case," Energy Convers Manag, vol. 266, no. May, p.115814, Aug. 2022.

DOI: 10.1016/j.enconman.2022.115814

[5] C. Acar and I. Dincer, "Comparative assessment of hydrogen production methods from renewable and non-renewable sources," Int J Hydrogen Energy, vol. 39, no. 1, p.1–12, 2014.

DOI: 10.1016/j.ijhydene.2013.10.060

[6] A. Marinkas et al., "Anion-conductive membranes based on 2-mesityl-benzimidazolium functionalised poly(2,6-dimethyl-1,4-phenylene oxide) and their use in alkaline water electrolysis," Polymer (Guildf), vol. 145, p.242–251, Jun. 2018.

DOI: 10.1016/j.polymer.2018.05.008

[7] K. E. Ayers et al., "Characterization of Anion Exchange Membrane Technology for Low Cost Electrolysis," ECS Meeting Abstracts, vol. MA2012-01, no. 28, p.1102–1102, Feb. 2012.

DOI: 10.1149/MA2012-01/28/1102

[8] N. Chen, S. Y. Paek, J. Y. Lee, J. H. Park, S. Y. Lee, and Y. M. Lee, "High-performance anion exchange membrane water electrolyzers with a current density of 7.68 A cm −2 and a durability of 1000 hours," Energy Environ Sci, vol. 14, no. 12, p.6338–6348, 2021.

DOI: 10.1039/D1EE02642A

[9] A. Manabe et al., "Basic study of alkaline water electrolysis," Electrochim Acta, vol. 100, no. 2013, p.249–256, Jun. 2013.

DOI: 10.1016/j.electacta.2012.12.105

[10] M. Carmo, D. L. Fritz, J. Mergel, and D. Stolten, "A comprehensive review on PEM water electrolysis," Int J Hydrogen Energy, vol. 38, no. 12, p.4901–4934, Apr. 2013.

DOI: 10.1016/j.ijhydene.2013.01.151

[11] A. Keçebaş, M. Kayfeci, and M. Bayat, "Electrochemical hydrogen generation," in Solar Hydrogen Production, Elsevier, 2019, pp.299-317.

DOI: 10.1016/B978-0-12-814853-2.00009-6

[12] S. Shiva Kumar and V. Himabindu, "Hydrogen production by PEM water electrolysis – A review," Mater Sci Energy Technol, vol. 2, no. 3, p.442–454, Dec. 2019.

DOI: 10.1016/j.mset.2019.03.002

[13] S. Krishnan, M. Fairlie, P. Andres, T. de Groot, and G. Jan Kramer, "Power to gas (H2): alkaline electrolysis," in Technological Learning in the Transition to a Low-Carbon Energy System, Elsevier, 2020, p.165–187.

DOI: 10.1016/B978-0-12-818762-3.00010-8

[14] M. Schalenbach, G. Tjarks, M. Carmo, W. Lueke, M. Mueller, and D. Stolten, "Acidic or Alkaline? Towards a New Perspective on the Efficiency of Water Electrolysis," J Electrochem Soc, vol. 163, no. 11, pp. F3197–F3208, Aug. 2016.

DOI: 10.1149/2.0271611jes

[15] I. Dincer and A. A. AlZahrani, "4.25 Electrolyzers," in Comprehensive Energy Systems, vol. 4–5, Elsevier, 2018, p.985–1025.

DOI: 10.1016/B978-0-12-809597-3.00442-9

[16] D. Burnat et al., "Composite membranes for alkaline electrolysis based on polysulfone and mineral fillers," J Power Sources, vol. 291, p.163–172, Sep. 2015.

DOI: 10.1016/j.jpowsour.2015.04.066

[17] Z. Zakaria and S. K. Kamarudin, "A review of alkaline solid polymer membrane in the application of AEM electrolyzer: Materials and characterization," Int J Energy Res, vol. 45, no. 13, p.18337–18354, Oct. 2021.

DOI: 10.1002/er.6983

[18] A. B. T. Nelabhotla, D. Pant, and C. Dinamarca, "Power-to-gas for methanation," in Emerging Technologies and Biological Systems for Biogas Upgrading, Elsevier, 2021, p.187–221.

DOI: 10.1016/B978-0-12-822808-1.00008-8

[19] I. Dincer and C. Zamfirescu, "Hydrogen Production by Electrical Energy," in Sustainable Hydrogen Production, Elsevier, 2016, p.99–161.

DOI: 10.1016/B978-0-12-801563-6.00003-0

[20] J. Dolci, F. Weidner, and E. Sensitive, "Historical Analysis of FCH 2 JU Electrolyser Projects," 2020.

[21] J. Brauns and T. Turek, "Alkaline Water Electrolysis Powered by Renewable Energy: A Review," Processes, vol. 8, no. 2, p.248, Feb. 2020.

DOI: 10.3390/pr8020248

[22] J. W. Haverkort and H. Rajaei, "Voltage losses in zero-gap alkaline water electrolysis," J Power Sources, vol. 497, no. January, p.229864, Jun. 2021.

DOI: 10.1016/j.jpowsour.2021.229864

[23] B. G. Pollet, A. A. Franco, H. Su, H. Liang, and S. Pasupathi, "Proton exchange membrane fuel cells," in Compendium of Hydrogen Energy, Elsevier, 2016, p.3–56.

DOI: 10.1016/B978-1-78242-363-8.00001-3

[24] W. Xu and K. Scott, "The effects of ionomer content on PEM water electrolyser membrane electrode assembly performance," Int J Hydrogen Energy, vol. 35, no. 21, p.12029–12037, Nov. 2010.

DOI: 10.1016/j.ijhydene.2010.08.055

[25] Y. Zhou, L. Sheng, Q. Luo, W. Zhang, and J. Yang, "Improving the Activity of Electrocatalysts toward the Hydrogen Evolution Reaction, the Oxygen Evolution Reaction, and the Oxygen Reduction Reaction via Modification of Metal and Ligand of Conductive Two-Dimensional Metal–Organic Frameworks," J Phys Chem Lett, vol. 12, no. 48, p.11652–11658, Dec. 2021.

DOI: 10.1021/acs.jpclett.1c03452

[26] S. Grigoriev, V. Porembsky, and V. Fateev, "Pure hydrogen production by PEM electrolysis for hydrogen energy," Int J Hydrogen Energy, vol. 31, no. 2, p.171–175, Feb. 2006.

DOI: 10.1016/j.ijhydene.2005.04.038

[27] P. Millet et al., "PEM water electrolyzers: From electrocatalysis to stack development," Int J Hydrogen Energy, vol. 35, no. 10, p.5043–5052, May 2010.

DOI: 10.1016/j.ijhydene.2009.09.015

[28] M. Thema, F. Bauer, and M. Sterner, "Power-to-Gas: Electrolysis and methanation status review," Renewable and Sustainable Energy Reviews, vol. 112, no. May, p.775–787, Sep. 2019.

DOI: 10.1016/j.rser.2019.06.030

[29] J. E. Park et al., "High-performance proton-exchange membrane water electrolysis using a sulfonated poly(arylene ether sulfone) membrane and ionomer," J Memb Sci, vol. 620, no. August 2020, p.118871, Feb. 2021.

DOI: 10.1016/j.memsci.2020.118871

[30] G. Wei, L. Xu, C. Huang, and Y. Wang, "SPE water electrolysis with SPEEK/PES blend membrane," Int J Hydrogen Energy, vol. 35, no. 15, p.7778–7783, Aug. 2010.

DOI: 10.1016/j.ijhydene.2010.05.041

[31] J. Han et al., "Cross-linked highly sulfonated poly(arylene ether sulfone) membranes prepared by in-situ casting and thiol-ene click reaction for fuel cell application," J Memb Sci, vol. 579, no. November 2018, p.70–78, Jun. 2019.

DOI: 10.1016/j.memsci.2019.02.048

[32] A. Albert, T. Lochner, T. J. Schmidt, and L. Gubler, "Stability and Degradation Mechanisms of Radiation-Grafted Polymer Electrolyte Membranes for Water Electrolysis," ACS Appl Mater Interfaces, vol. 8, no. 24, p.15297–15306, Jun. 2016.

DOI: 10.1021/acsami.6b03050

[33] I. Vincent and D. Bessarabov, "Low cost hydrogen production by anion exchange membrane electrolysis: A review," Renewable and Sustainable Energy Reviews, vol. 81, p.1690–1704, Jan. 2018.

DOI: 10.1016/j.rser.2017.05.258

[34] I. V. Pushkareva, A. S. Pushkarev, S. A. Grigoriev, P. Modisha, and D. G. Bessarabov, "Comparative study of anion exchange membranes for low-cost water electrolysis," Int J Hydrogen Energy, vol. 45, no. 49, p.26070–26079, Oct. 2020.

DOI: 10.1016/j.ijhydene.2019.11.011

[35] I. Vincent, "Hydrogen Production by water Electrolysis with an Ultrathin Anion-exchange membrane (AEM)," Int J Electrochem Sci, vol. 13, no. 12, p.11347–11358, Dec. 2018.

DOI: 10.20964/2018.12.84

[36] X. Wu and K. Scott, "A polymethacrylate-based quaternary ammonium OH− ionomer binder for non-precious metal alkaline anion exchange membrane water electrolysers," J Power Sources, vol. 214, p.124–129, Sep. 2012.

DOI: 10.1016/j.jpowsour.2012.03.069

[37] B. Motealleh, Z. Liu, R. I. Masel, J. P. Sculley, Z. Richard Ni, and L. Meroueh, "Next-generation anion exchange membrane water electrolyzers operating for commercially relevant lifetimes," Int J Hydrogen Energy, vol. 46, no. 5, p.3379–3386, Jan. 2021.

DOI: 10.1016/j.ijhydene.2020.10.244

[38] K. Ayers, N. Danilovic, R. Ouimet, M. Carmo, B. Pivovar, and M. Bornstein, "Perspectives on Low-Temperature Electrolysis and Potential for Renewable Hydrogen at Scale," Annu Rev Chem Biomol Eng, vol. 10, no. 1, p.219–239, Jun. 2019.

DOI: 10.1146/annurev-chembioeng-060718-030241

[39] N. Ramaswamy and S. Mukerjee, "Alkaline Anion-Exchange Membrane Fuel Cells: Challenges in Electrocatalysis and Interfacial Charge Transfer.," Chem Rev, vol. 119, no. 23, p.11945–11979, Dec. 2019.

DOI: 10.1021/acs.chemrev.9b00157

[40] D. Xu et al., "Earth-Abundant Oxygen Electrocatalysts for Alkaline Anion-Exchange-Membrane Water Electrolysis: Effects of Catalyst Conductivity and Comparison with Performance in Three-Electrode Cells," ACS Catal, vol. 9, no. 1, p.7–15, Jan. 2019.

DOI: 10.1021/acscatal.8b04001

[41] M. Manolova et al., "Development and testing of an anion exchange membrane electrolyser," Int J Hydrogen Energy, vol. 40, no. 35, p.11362–11369, Sep. 2015.

DOI: 10.1016/j.ijhydene.2015.04.149

[42] S. Seetharaman, R. Balaji, K. Ramya, K. S. Dhathathreyan, and M. Velan, "Graphene oxide modified non-noble metal electrode for alkaline anion exchange membrane water electrolyzers," Int J Hydrogen Energy, vol. 38, no. 35, p.14934–14942, Nov. 2013.

DOI: 10.1016/j.ijhydene.2013.09.033

[43] G. Merle, M. Wessling, and K. Nijmeijer, "Anion exchange membranes for alkaline fuel cells: A review," J Memb Sci, vol. 377, no. 1–2, p.1–35, Jul. 2011.

DOI: 10.1016/j.memsci.2011.04.043

[44] I. Vincent, A. Kruger, and D. Bessarabov, "Development of efficient membrane electrode assembly for low cost hydrogen production by anion exchange membrane electrolysis," Int J Hydrogen Energy, vol. 42, no. 16, p.10752–10761, Apr. 2017.

DOI: 10.1016/j.ijhydene.2017.03.069

[45] M. Treichel, J. C. Gaitor, C. Birch, J. L. Vinskus, and K. J. T. Noonan, "Anion-exchange membranes derived from main group and metal-based cations," Polymer (Guildf), vol. 249, p.124811, May 2022.

DOI: 10.1016/j.polymer.2022.124811

[46] W. You, K. J. T. Noonan, and G. W. Coates, "Alkaline-stable anion exchange membranes: A review of synthetic approaches," Prog Polym Sci, vol. 100, p.101177, Jan. 2020.

DOI: 10.1016/j.progpolymsci.2019.101177

[47] G. Couture, A. Alaaeddine, F. Boschet, and B. Ameduri, "Polymeric materials as anion-exchange membranes for alkaline fuel cells," Prog Polym Sci, vol. 36, no. 11, p.1521–1557, Nov. 2011.

DOI: 10.1016/j.progpolymsci.2011.04.004

[48] D. Chen and M. A. Hickner, "Degradation of Imidazolium- and Quaternary Ammonium-Functionalized Poly(fluorenyl ether ketone sulfone) Anion Exchange Membranes," ACS Appl Mater Interfaces, vol. 4, no. 11, p.5775–5781, Nov. 2012.

DOI: 10.1021/am301557w

[49] A. M. Park, R. J. Wycisk, X. Ren, F. E. Turley, and P. N. Pintauro, "Crosslinked poly(phenylene oxide)-based nanofiber composite membranes for alkaline fuel cells," J Mater Chem A Mater, vol. 4, no. 1, p.132–141, 2016.

DOI: 10.1039/C5TA06209H

[50] M. D. T. Nguyen, S. Yang, and D. Kim, "Pendant dual sulfonated poly(arylene ether ketone) proton exchange membranes for fuel cell application," J Power Sources, vol. 328, p.355–363, Oct. 2016.

DOI: 10.1016/j.jpowsour.2016.08.041

[51] Z. Li et al., "Preparing alkaline anion exchange membrane with enhanced hydroxide conductivity via blending imidazolium-functionalized and sulfonated poly(ether ether ketone)," J Power Sources, vol. 288, p.384–392, Aug. 2015.

DOI: 10.1016/j.jpowsour.2015.04.112

[52] P. T. Nonjola, M. K. Mathe, and R. M. Modibedi, "Chemical modification of polysulfone: Composite anionic exchange membrane with TiO2 nano-particles," Int J Hydrogen Energy, vol. 38, no. 12, p.5115–5121, Apr. 2013.

DOI: 10.1016/j.ijhydene.2013.02.028

[53] A. A. Mohamad and A. K. Arof, "Plasticized alkaline solid polymer electrolyte system," Mater Lett, vol. 61, no. 14–15, p.3096–3099, Jun. 2007.

DOI: 10.1016/j.matlet.2006.11.030

[54] S. Sang, J. Zhang, Q. Wu, and Y. Liao, "Influences of Bentonite on conductivity of composite solid alkaline polymer electrolyte PVA-Bentonite-KOH-H2O," Electrochim Acta, vol. 52, no. 25, p.7315–7321, Sep. 2007.

DOI: 10.1016/j.electacta.2007.06.004

[55] Y. Li, S. Shi, H. Cao, Z. Zhao, and H. Wen, "Modification and properties characterization of heterogeneous anion-exchange membranes by electrodeposition of graphene oxide (GO)," Appl Surf Sci, vol. 442, p.700–710, Jun. 2018.

DOI: 10.1016/j.apsusc.2018.02.166

[56] Y.-C. Cao, X. Wu, and K. Scott, "A quaternary ammonium grafted poly vinyl benzyl chloride membrane for alkaline anion exchange membrane water electrolysers with no-noble-metal catalysts," Int J Hydrogen Energy, vol. 37, no. 12, p.9524–9528, Jun. 2012.

DOI: 10.1016/j.ijhydene.2012.03.116

[57] S.-C. Jang, F.-S. Chuang, W.-C. Tsen, and T.-W. Kuo, "Quaternized chitosan/functionalized carbon nanotubes composite anion exchange membranes," J Appl Polym Sci, vol. 136, no. 30, p.47778, Aug. 2019.

DOI: 10.1002/app.47778

[58] R. Kannan, P. P. Aher, T. Palaniselvam, S. Kurungot, U. K. Kharul, and V. K. Pillai, "Artificially Designed Membranes Using Phosphonated Multiwall Carbon Nanotube−Polybenzimidazole Composites for Polymer Electrolyte Fuel Cells," J Phys Chem Lett, vol. 1, no. 14, p.2109–2113, Jul. 2010.

DOI: 10.1021/jz1007005

[59] R. Kannan, B. A. Kakade, and V. K. Pillai, "Polymer Electrolyte Fuel Cells Using Nafion-Based Composite Membranes with Functionalized Carbon Nanotubes," Angewandte Chemie International Edition, vol. 47, no. 14, p.2653–2656, Mar. 2008.

DOI: 10.1002/anie.200704343

[60] X. L. Xie, Y. W. Mai, and X. P. Zhou, "Dispersion and alignment of carbon nanotubes in polymer matrix: A review," Materials Science and Engineering R: Reports, vol. 49, no. 4. Elsevier Ltd, p.89–112, May 19, 2005.

DOI: 10.1016/j.mser.2005.04.002

[61] O. Movil, L. Frank, and J. A. Staser, "Graphene Oxide–Polymer Nanocomposite Anion-Exchange Membranes," J Electrochem Soc, vol. 162, no. 4, pp. F419–F426, Jan. 2015.

DOI: 10.1149/2.0681504jes

[62] T. Sata, M. Tsujimoto, T. Yamaguchi, and K. Matsusaki, "Change of anion exchange membranes in an aqueous sodium hydroxide solution at high temperature," J Memb Sci, vol. 112, no. 2, p.161–170, Apr. 1996.

DOI: 10.1016/0376-7388(95)00292-8

[63] F. Zhang, H. Zhang, and C. Qu, "Imidazolium functionalized polysulfone anion exchange membrane for fuel cell application," J Mater Chem, vol. 21, no. 34, p.12744, 2011.

DOI: 10.1039/c1jm10656b

[64] Q. Zhang, S. Li, and S. Zhang, "A novel guanidinium grafted poly(aryl ether sulfone) for high-performance hydroxide exchange membranes," Chemical Communications, vol. 46, no. 40, p.7495, 2010.

DOI: 10.1039/c0cc01834a

[65] K. K. Stokes, J. A. Orlicki, and F. L. Beyer, "RAFT polymerization and thermal behavior of trimethylphosphonium polystyrenes for anion exchange membranes," Polym. Chem., vol. 2, no. 1, p.80–82, 2011.

DOI: 10.1039/C0PY00293C

[66] K. Yamamoto, E. Shouji, F. Suzuki, S. Kobayashi, and E. Tsuchida, "Synthesis of Poly(sulfonium cation) by Oxidative Polymerization of Aryl Alkyl Sulfides," J Org Chem, vol. 60, no. 2, p.452–453, Jan. 1995.

DOI: 10.1021/jo00107a027

[67] D. Henkensmeier, M. Najibah, C. Harms, J. Žitka, J. Hnát, and K. Bouzek, "Overview: State-of-the Art Commercial Membranes for Anion Exchange Membrane Water Electrolysis," Journal of Electrochemical Energy Conversion and Storage, vol. 18, no. 2, May 2021.

DOI: 10.1115/1.4047963

[68] D. Ion-Ebrasu et al., "Graphene inclusion effect on anion-exchange membranes properties for alkaline water electrolyzers," Int J Hydrogen Energy, vol. 45, no. 35, p.17057–17066, Jul. 2020.

DOI: 10.1016/j.ijhydene.2020.04.195

[69] I. Arunkumar, A. R. Kim, S. H. Lee, and D. J. Yoo, "Enhanced fumion nanocomposite membranes embedded with graphene oxide as a promising anion exchange membrane for fuel cell application," Int J Hydrogen Energy, 2022.

DOI: 10.1016/j.ijhydene.2022.10.184

[70] http://en.scimaterials.cn/ProDetail.aspx?ProId=361 accessed 02/28/(2023)

[71] https://www.sigmaaldrich.com/IT/it/search/chitosan?facet=facet_related_category%3ABiomedical%20Polymers&focus=products&page=1&perpage=30&sort=relevance&term=chitosan&type=product accessed 02/28/(2023)

[72] D. Pletcher and X. Li, "Prospects for alkaline zero gap water electrolysers for hydrogen production," Int J Hydrogen Energy, vol. 36, no. 23, p.15089–15104, 2011.

DOI: 10.1016/j.ijhydene.2011.08.080

[73] Y. Leng, G. Chen, A. J. Mendoza, T. B. Tighe, M. A. Hickner, and C.-Y. Wang, "Solid-State Water Electrolysis with an Alkaline Membrane," J Am Chem Soc, vol. 134, no. 22, p.9054–9057, Jun. 2012.

DOI: 10.1021/ja302439z

[74] S. Seetharaman, R. Balaji, K. Ramya, K. S. Dhathathreyan, and M. Velan, "Graphene oxide modified non-noble metal electrode for alkaline anion exchange membrane water electrolyzers," Int J Hydrogen Energy, vol. 38, no. 35, p.14934–14942, Nov. 2013

DOI: 10.1016/j.ijhydene.2013.09.033

[75] Z. Liu, S. D. Sajjad, Y. Gao, H. Yang, J. J. Kaczur, and R. I. Masel, "The effect of membrane on an alkaline water electrolyzer," Int J Hydrogen Energy, vol. 42, no. 50, p.29661–29665, Dec. 2017.

DOI: 10.1016/j.ijhydene.2017.10.050