Gleeble Simulation of HAZ in S690QL Steel: Microstructural and Mechanical Properties

Abstract:

When investigating the heterogeneous properties of welded joints, mechanical testing of certain Heat Affected Zone (HAZ) regions, using standard approach test specimens, is very difficult or sometimes even impossible. Inability to precisely position and extract mechanical test specimens, even ones of the subsize dimensions, from the narrow HAZ regions is a limiting factor in the mechanical testing implementation. Detailed investigation of the HAZ is made possible by the use of thermo-mechanical simulations on the Gleeble welding simulator. In scope of this paper several characteristic HAZ microstructures of S690QL grade High Strength Steel (HSS) are being simulated. Multi-pass welding simulations are done on special 10x10 mm square section bar specimens in order to reproduce thermal gradients and characteristic microstructures at any location in a weld. Such simulated HAZ microstructures are of a sufficiently large volume, with homogeneous and repeatable properties, that standard specimen methods for mechanical testing can be readily implemented. Metallographic optical examinations, as well as hardness measurements were done initially. Mechanical properties are focused on determining stress-strain curves for each characteristic weld region. The paper investigates whether the mechanical properties of Gleeble simulated hard-soft combined HAZ regions are better in comparison to exclusively hard or soft HAZ regions. The obtained results can subsequently be used for the material model development.

• Periodical: Key Engineering Materials (Volume 966)
• Pages: 115-120
• DOI: https://doi.org/10.4028/p-HmvK3N
• Online since: November 2023
• Authors: Damir Tomerlin*, Nenad Gubeljak, Dražan Kozak
• Keywords: Experimental Testing, Gleeble, High Strength Steel, Thermo-Mechanical Simulations, Welded Joint Heterogeneity

References

[1] SSAB, Welding Handbook: A Guide to Better Welding of Hardox and Strenx, 2nd, ed., SSAB, Oxelösund, Sweden, 2019.

[2] Voestalpine Grobblech, aldur® High-strength quenched and tempered fine-grained steels, voestalpine Grobblech, Linz, Austria, 2022.

[3] C. Schneider, W. Ernst, R. Schnitzer, H. Staufer, R. Vallant, N. Enzinger, Welding of S960MC with undermatching filler material, Weld World 62 (2018) 801–809.

DOI: 10.1007/s40194-018-0570-1

[4] F. Hochhauser, W. Ernst, R. Rauch, R. Vallant, N. Enzinger, Influence of the soft zone on the strength of welded modern hsla steels, Weld. World 56 (2012) 77–85.

DOI: 10.1007/bf03321352

[5] M. Mičian, D. Harmaniak, F. Nový, J. Winczek, J. Moravec, L. Trško, Effect of the t8/5 Cooling Time on the Properties of S960MC Steel in the HAZ of Welded Joints Evaluated by Thermal Physical Simulation, Metals 10 (2020), 229.

DOI: 10.3390/met10020229

[6] A. Guillal, N. Abdelbaki, M. Gaceb, M. Bettayeb, Effects of martensite-austenite constituents on mechanical properties of heat affected zone in high strength pipeline steels-review, Chemical Engineering Transactions 70 (2018), 583-588

[7] D. Tomerlin, D. Marić, D. Kozak, I. Samardžić, Post-Weld Heat Treatment of S690QL1 Steel Welded Joints: Influence on Microstructure, Mechanical Properties and Residual Stress, Metals 13 (2023), 999.

DOI: 10.3390/met13050999

[8] S. Hertelé, J. Bally, N. Gubeljak, P. Štefane, P. Verleysen, W. De Waele, Characterization of Heterogeneous Arc Welds Through Miniature Tensile Testing and Vickers-hardness Mapping, Materials and technology 50 (2016) 4, 571–574

DOI: 10.17222/mit.2015.157

[9] L. Starčevič, N. Gubeljak, J. Predan, The Numerical Modelling Approach with a Random Distribution of Mechanical Properties for a Mismatched Weld, Materials 14 (2021), 5896. https://doi.org/.

DOI: 10.3390/ma14195896