Engineering Research
Advanced Engineering Forum
Applied Mechanics and Materials
Engineering Chemistry
Engineering Innovations
Journal of Biomimetics, Biomaterials and Biomedical Engineering
International Journal of Engineering Research in Africa
Materials Science
Advanced Materials Research
Defect and Diffusion Forum
Diffusion Foundations and Materials Applications
Journal of Metastable and Nanocrystalline Materials
Journal of Nano Research
Key Engineering Materials
Materials Science Forum
Nano Hybrids and Composites
Solid State Phenomena
Engineering Series
Advances in Science and Technology
Construction Technologies and Architecture
Engineering Headway
Key Engineering Materials
Volumes
Edited by:
Irina Hussainova
Online since: November 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
The Baltic International Conferences on Materials Engineering and Tribology were initiated 19 years ago and focus on materials issues and tribological studies. During this period, BALTMATTRIB has become an open forum where researchers and engineers can exchange ideas, share thoughts and encourage development and cooperation in both basic and applied research in the fields of materials science, powder metallurgy, surface engineering and tribology.
The Baltic International Conferences on Materials Engineering and Tribology were initiated 19 years ago and focus on materials issues and tribological studies. During this period, BALTMATTRIB has become an open forum where researchers and engineers can exchange ideas, share thoughts and encourage development and cooperation in both basic and applied research in the fields of materials science, powder metallurgy, surface engineering and tribology.
Edited by:
Qing Fen Li, Yu Long Li and Prof. Ferri M.H.Aliabadi
Online since: November 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
This volume covers a wide range of topics: Fracture Mechanics, Failure Analysis, Composites, Multiscale Modeling, Micromechanics, Structural Health Monitoring, Damage Tolerance, Corrosion, Creep, Non-Linear Problems, Dynamic Fracture, Residual Stress, Environmental Effects, Crack Propagation, Metallic and Concrete Materials, Probabilistic Aspects, Computer Modeling Methods (Finite Element, Boundary Element and Meshless), Microstructural and Multiscale Aspects.
This volume covers a wide range of topics: Fracture Mechanics, Failure Analysis, Composites, Multiscale Modeling, Micromechanics, Structural Health Monitoring, Damage Tolerance, Corrosion, Creep, Non-Linear Problems, Dynamic Fracture, Residual Stress, Environmental Effects, Crack Propagation, Metallic and Concrete Materials, Probabilistic Aspects, Computer Modeling Methods (Finite Element, Boundary Element and Meshless), Microstructural and Multiscale Aspects.
Edited by:
Tojiro Aoyama, Hideki Aoyama, Atsushi Matsubara, Hayato Yoshioka and Libo Zhou
Online since: November 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
These 189 conference papers cover a wide variety of topical areas, including: high-precision machining, non-conventional machining, CAD/CAM technology, machine tools and control, MEMS/NEMS, precision/medical devices, mechatronics, mechanical design and tribology, metrology, green manufacturing, advanced molding and forming and other related technologies. This work will certainly stimulate further research and development in the field of precision engineering.
These 189 conference papers cover a wide variety of topical areas, including: high-precision machining, non-conventional machining, CAD/CAM technology, machine tools and control, MEMS/NEMS, precision/medical devices, mechatronics, mechanical design and tribology, metrology, green manufacturing, advanced molding and forming and other related technologies. This work will certainly stimulate further research and development in the field of precision engineering.
Edited by:
Guanglin Wang, Huifeng Wang, Xiang Zhang, Bin Li, Dingfang Chen and Yuefeng Li
Online since: August 2012
Description: Volume is indexed by Thomson Reuters BCI (WoS).
This special issue of Key Engineering Materials presents the latest progress in, and research on, new theories, technology, methods and equipment in materials processing and manufacturing automation technology. It covers the worldwide cutting-edge technological and research trends which will drive international communication and cooperation in production, education and progress. The major topics considered include: Experience and Paper Education in Special Machining Technology, Process Monitoring and Quality Control of Manufacturing Systems, Industrial Robot Technology, Agile Manufacturing, Intelligent Manufacturing, Green Manufacturing, Virtual Manufacturing, Networked Manufacturing, Computer Integrated Manufacturing Systems and Contemporary Integrated Manufacturing Systems, Product Life-Cycle Management, Computerized Numerical Control Systems and Flexible Manufacturing Systems, Precision Machining Technology, CAD/CAE/CAPP/CAM and Application of Product Data Management, Logistics Engineering and Equipment and Other Related Topics.
This special issue of Key Engineering Materials presents the latest progress in, and research on, new theories, technology, methods and equipment in materials processing and manufacturing automation technology. It covers the worldwide cutting-edge technological and research trends which will drive international communication and cooperation in production, education and progress. The major topics considered include: Experience and Paper Education in Special Machining Technology, Process Monitoring and Quality Control of Manufacturing Systems, Industrial Robot Technology, Agile Manufacturing, Intelligent Manufacturing, Green Manufacturing, Virtual Manufacturing, Networked Manufacturing, Computer Integrated Manufacturing Systems and Contemporary Integrated Manufacturing Systems, Product Life-Cycle Management, Computerized Numerical Control Systems and Flexible Manufacturing Systems, Precision Machining Technology, CAD/CAE/CAPP/CAM and Application of Product Data Management, Logistics Engineering and Equipment and Other Related Topics.
Edited by:
M. Nadagouda, M. Connelly, B. Derin, H.P. Li and J.A. Sekhar
Online since: August 2012
Description: Volume is indexed by Thomson Reuters BCI (WoS).
Innovation in Materials Science - 2 reinforces the adage of John Dismukes that, “Scientific Technology” has progressively displaced “Empirical Technology”, as the primary driver and basis for increasing economic development over the last four centuries. Technical inventions, and innovations based upon technical ideas, remain the basic drivers for wealth-creation. However, the areas of current materials research have changed considerably between 2008, when the first volume was published, and now (2012). The collection of articles in Volume 2 reflects this change. An index of the articles published in the earlier collection, Innovation in Materials Science (2008 doi:10.4028/www.scientific.net/KEM.380) is also provided in order to comprehend the considerable changes which have occurred in the landscape of materials research over the past four years.
Innovation in Materials Science - 2 reinforces the adage of John Dismukes that, “Scientific Technology” has progressively displaced “Empirical Technology”, as the primary driver and basis for increasing economic development over the last four centuries. Technical inventions, and innovations based upon technical ideas, remain the basic drivers for wealth-creation. However, the areas of current materials research have changed considerably between 2008, when the first volume was published, and now (2012). The collection of articles in Volume 2 reflects this change. An index of the articles published in the earlier collection, Innovation in Materials Science (2008 doi:10.4028/www.scientific.net/KEM.380) is also provided in order to comprehend the considerable changes which have occurred in the landscape of materials research over the past four years.
Edited by:
Ma Qian
Online since: August 2012
Description: The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.
Edited by:
Huayu Zhang
Online since: July 2012
Description: The exploitation of new energy sources is one of the ways of decreasing carbon emissions, optimizing energy infrastructures and realizing sustainable development. New energy materials are important for guiding and supporting the development of new energy sources, and are extensively used in novel energy systems.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings consist of the 69 papers which were submitted to the 2012 International Workshop on Materials for Energy Conversion and Storage which was held on March 23-25 in Shenzhen, China. The goal of this workshop was to provide a forum where researchers, engineers and students could discuss their latest research results and exchange experimental conclusions concerning the latest developments in the field of new energy materials.
Volume is indexed by Thomson Reuters CPCI-S (WoS).
These proceedings consist of the 69 papers which were submitted to the 2012 International Workshop on Materials for Energy Conversion and Storage which was held on March 23-25 in Shenzhen, China. The goal of this workshop was to provide a forum where researchers, engineers and students could discuss their latest research results and exchange experimental conclusions concerning the latest developments in the field of new energy materials.
Edited by:
Tadeusz Uhl
Online since: July 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
The aim of this special collection is to bring together the expertise of scientists and engineers from universities and industry who work in the fields of Structural Health Monitoring, Non-Destructive Evaluation and Condition Monitoring. Networking between diagnostic systems designers and system users is crucial to the successful operation of many SHM systems. The study of damage detection, localization and assessment are important to the rapidly growing area of SHM.
The aim of this special collection is to bring together the expertise of scientists and engineers from universities and industry who work in the fields of Structural Health Monitoring, Non-Destructive Evaluation and Condition Monitoring. Networking between diagnostic systems designers and system users is crucial to the successful operation of many SHM systems. The study of damage detection, localization and assessment are important to the rapidly growing area of SHM.
Edited by:
Yan Xiao, Zhi Li, Rui Wang, Bo Shan and Prof. Khosrow Ghavami
Online since: June 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
The 13th NOCMAT Conference continued to provide a forum where researchers, governmental and non-governmental agencies could introduce their research results concerning innovations in the field of low-cost energy-saving materials which are renewable and locally available: such as bamboo, soil fibers and cement alternatives. Also covered were technologies which make use of such non-conventional materials as natural fibers and agricultural and industrial residues in a more cost-effective, durable, environment-friendly, energy-efficient and sustainable manner.
The 13th NOCMAT Conference continued to provide a forum where researchers, governmental and non-governmental agencies could introduce their research results concerning innovations in the field of low-cost energy-saving materials which are renewable and locally available: such as bamboo, soil fibers and cement alternatives. Also covered were technologies which make use of such non-conventional materials as natural fibers and agricultural and industrial residues in a more cost-effective, durable, environment-friendly, energy-efficient and sustainable manner.
Edited by:
W.B. Lee, C.F. Cheung and S. To
Online since: June 2012
Description: Volume is indexed by Thomson Reuters CPCI-S (WoS).
The present volumes contain selected papers on the fields of precision engineering - including precision/ultra-precision machining, non-traditional machining, manufacturing systems and machine tools, nano and micro metrology and surface characterization, MEMS/NEMS, advanced moulding and forming, high-precision mechatronics and other technologies which are associated with micro/nano manufacturing. The work provides up-to-date and comprehensive coverage of the progress being made world wide.
The present volumes contain selected papers on the fields of precision engineering - including precision/ultra-precision machining, non-traditional machining, manufacturing systems and machine tools, nano and micro metrology and surface characterization, MEMS/NEMS, advanced moulding and forming, high-precision mechatronics and other technologies which are associated with micro/nano manufacturing. The work provides up-to-date and comprehensive coverage of the progress being made world wide.