Effect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled Rebars

Abstract:

While the role of Nb in flat rolling of low carbon steels has been investigated in many works, the information about the use of Nb in rebar rolling of higher carbon grades is more limited. Rebar rolling presents differences relative to flat rolling that can affect the role of Nb, such as the application of higher number of rolling passes, higher strain rates, lower interpass times, and, consequently, enhanced adiabatic heating. Increasing the number of passes can contribute to austenite grain refinement. However, the high finishing temperatures in rebar rolling can lead also to significant austenite grain growth and microstructural heterogeneity development before phase transformation. This phenomenon will directly influence the final grain size and can also lead to the appearance of second hard phases in the final product. One of the options to avoid austenite grain growth is to add microalloying elements that retard grain growth kinetics, either in solid solution or as precipitates. This can open new roles for the application of Nb in rebar rolling. To analyze this, in this work laboratory torsion tests were performed with two 0.2%C steels microalloyed with two different Nb contents (0.029% and 0.015%). Soaking temperatures from 1100°C to 1250°C were applied to obtain different amounts of Nb in solid solution before grain growth study. The study shows that not only finish rolling temperature and cooling time, but also reheating temperature and the amount of Nb remaining in the form of undissolved precipitates are important factors controlling austenite grain growth.

• Periodical: Materials Science Forum (Volume 1016)
• Pages: 1127-1133
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.1016.1127
• Online since: January 2021
• Authors: Beatriz Pereda*, Felipe Bastos, Beatriz López, J.M. Rodriguez-Ibabe
• Keywords: Grain Growth, Hot Rolling, Nb Microalloying, Rebars

References

[1] B. López, B. Pereda, F. Bastos, M. Rebellato, J.M. Rodriguez-Ibabe, Challenges of Nb application in thermomechanical processes of steels for long products, Mater. Sci. Forum 941 (2018) 386-393.

DOI: 10.4028/www.scientific.net/msf.941.386

[2] A.I. Fernandez, P. Uranga, B. López, J.M. Rodriguez-Ibabe, Static recrystallization behaviour of a wide range of austenite grain sizes in microalloyed steels, ISIJ Int. 40 (2000) 893-901.

DOI: 10.2355/isijinternational.40.893

[3] B. Pereda, Z. Aretxabaleta, B. López, Softening kinetics in high Al and high Al-Nb-microalloyed steels, J. Mater. Eng. Perform. 24 (2015) 1279-1293.

DOI: 10.1007/s11665-015-1387-3

[4] S. Bechet, L. Beaujard, New reagent for the micrographical demonstration of the austenite grain of hardened-tempered steels, Rev. Met. 52 (1955) 830-866.

[5] P.D. Hodgson, R.K. Gibbs, A mathematical model to predict the mechanical properties of hot rolled C-Mn and microalloyed steels, ISIJ Int. 32 (1992) 1329-1338.

DOI: 10.2355/isijinternational.32.1329

[6] J.M. Rodriguez-Ibabe, Thin Slab Direct Rolling of Microalloyed Steels, 1st ed., Trans Tech., (2007).

[7] K.J. Irvine, F.B. Pickering, T. Gladman, Grain-refined C-Mn steels, Iron Steel Inst. 205 (1967) 161-182.

[8] J.O. Andersson, T. Helander, L. Hodglug, P.F. Shi, Thermo-Calc and DICTRA, Computational tools for materials science, Calphad (2002) 273-312.

DOI: 10.1016/s0364-5916(02)00037-8