Effect of Temperature on the Cyclic Stress Amplitude of ENiCrFe-1 Ni-Based Alloy Electrode and its Mechanism

Abstract:

Ni-based alloy welding material has been widely used in the welding and post-welding repair of high-temperature materials. The effect of temperature on the cyclic stress amplitude of ENiCrFe-1 Ni-base alloy electrode was studied under the same strain condition. The results showed that when the temperature was lower than 400 °C, it presented the characteristics of cyclic hardening and then cyclic softening. When the temperature was higher than 500 °C, it presented the characteristics of cyclic hardening and then cyclic stability. The main reason is that with the temperature increase, the dislocation structure changed more and more stable. The results not only enrich the internal mechanism of fatigue behavior of nickel-based alloy welding materials, but also have important reference value for improving the structural safety of welded joints.

• Periodical: Materials Science Forum (Volume 1035)
• Pages: 259-263
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.1035.259
• Online since: June 2021
• Authors: Qun Bing Zhang*, Jian Xun Zhang, Wen Lan Wei
• Keywords: Cyclic Stress Amplitude, Dislocation Morphology, Low Cycle Fatigue (LCF), Ni-Based Alloy

References

[1] Q Wu, F Lu, H Cui, et al. Soft zone formation by carbon migration and its effect on the high-cycle fatigue in 9%Cr-CrMoV dissimilar welded joint, Materials Letters, 141 (2015) 242-244.

DOI: 10.1016/j.matlet.2014.08.158

[2] S. J. Chen, X. X. Ye, D.K.L. Tsang, et al.Welding solidification cracking susceptibility and behavior of a Ni-28W-6Cr alloy, Journal of Materials Science & Technology, 35 (2019) 29-35.

DOI: 10.1016/j.jmst.2018.09.013

[3] D. L. Wu, P Zhao, Q. Q. Wang, et al. Cyclic behavior of 9-12%Cr steel under different control modes in low cycle regime: A comparative study, International Journal of Fatigue, 70 (2015) 114-122.

DOI: 10.1016/j.ijfatigue.2014.08.006

[4] K Mariappan, V Shankar, R Sandhya, et al. Comparative assessment of remnant tensile propertiesof modified 9Cr-1Mo steel under prior low cycle fatigue and creep-fatigue interaction loading, International Journal of Fatigue, 103 (2017) 342-352.

DOI: 10.1016/j.ijfatigue.2017.05.013

[5] M Ochi, K Suzuki, I Nonaka, et al. High cycle fatigue strength of modified 9Cr-1Mo steel at elevated temperatures, International Mechanical Engineering Congress and Exposition, 2014, 1-5.

DOI: 10.1115/imece2014-36865

[6] Q Wu, F Lu, H Cui, et al. Microstructure characteristics and temperature-dependent high cycle fatigue behavior of advanced 9%Cr/CrMoV dissimilarly welded joint, Materials Science and Engineering A, 615 (2014) 98-106.

DOI: 10.1016/j.msea.2014.07.067

[7] Q. B. Zhang, J. X. Zhang, Fatigue crack growth behavior of a new type of 10%Cr martensitic steel welded joints with Ni-based weld metal, Journal of Materials Engineering and Performance, (2017) 1-8.

DOI: 10.1007/s11665-017-2756-x

[8] Q. B. Zhang, J. X. Zhang, P. F. Zhao, et al. Low-cycle fatigue behaviors of a new type of 10%Crmartensitic steel and welded joint with Ni-based weld metal. International Journal of Fatigue, 88 (2016) 78-87.

DOI: 10.1016/j.ijfatigue.2016.03.003