Application of Magnetic Abrasive Finishing Process Using Alternating Magnetic Field for Finishing Polychlorotrifluoroethylene Resin

Hui Jun Xie; Yan Hua Zou

doi:10.4028/p-q08k66

Paper Titles

Study on Corrosion Tendency Evaluation of Microstructure in Welding Heat Affected Zone of Austenitic Stainless Steel
p.60

Study on Grain Boundary Sensitization in Heat Affected Zone of Austenitic Stainless Steel and its Evaluation Method
p.65

Identification of Material Viscoelastic Properties using the Motion of a Rigid Sphere Located at Tissue-Mimicking Material Interface in Response to a Dynamic Force
p.73

Effects of Metal Matrix Composition on the Pre-Sintering Process of Cu-Based Metallic Friction Materials
p.79

Application of Magnetic Abrasive Finishing Process Using Alternating Magnetic Field for Finishing Polychlorotrifluoroethylene Resin
p.85

Copper Tannate (CuTn) Based Coating on 3D Printed Face Masks
p.93

Printability and Warpage Evaluation of Polypropylene/Nano Precipitated Calcium Carbonate Composite Prepared by Extrusion-Based 3D Printing
p.99

Improvement of Isotropic Strength of 3D Printing-Based Self-Healing Capsules by Controlling the Position of Holes
p.105

Photocatalytic Degradation of Allura Red (AR) with TiO₂ Immobilized on Solution Blow Spinning (SBS) - Spun TIPP/PVP Membranes
p.113

HomeMaterials Science ForumMaterials Science Forum Vol. 1066Application of Magnetic Abrasive Finishing Process...

Application of Magnetic Abrasive Finishing Process Using Alternating Magnetic Field for Finishing Polychlorotrifluoroethylene Resin

Abstract:

In previous studies, it has been verified that the magnetic abrasive finishing process using alternating magnetic field can achieve higher finishing efficiency and surface quality, and nanolevel finishing of 5052 aluminum alloy material and SUS304 stainless steel material has been realized. In this study, the feasibility for ultra-precision finishing of polychlorotrifluoroethylene resin by this process was investigated, and the cutting mechanism of particles was discussed. As a result, the cutting depth of the particles is mainly affected by the size of the magnetic particles and abrasive particles. According to the experimental results, under optimized experimental conditions, the surface roughness of the workpiece can be improved from 112.83 nm Ra to 5 nm Ra within 15 minutes.

You might also be interested in these eBooks

Advanced Materials and Engineering Materials (11th ICAMEM)

View Preview

Materials and Technologies for Protection and Constructions

View Preview

Info:

Periodical:

Materials Science Forum (Volume 1066)

Pages:

85-90

DOI:

https://doi.org/10.4028/p-q08k66

Citation:

Cite this paper

Online since:

July 2022

Authors:

Hui Jun Xie*, Yan Hua Zou

Keywords:

Alternating Magnetic Field, Magnetic Abrasive Finishing, PCTFE, Polychlorotrifluoroethylene Resin, Surface Roughness

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] Teng H., Overview of the Development of the Fluoropolymer Industry, Appl. Sci. 2 (2012) 496-512.

Google Scholar

[2] Fan Z., Tian Y., Liu Z., Shi C., Zhao Y., Investigation of a novel finishing tool in magnetic field assisted finishing for titanium alloy Ti-6Al-4V, J. Manuf. Processes 43 (2019) 74-82.

DOI: 10.1016/j.jmapro.2019.05.007

Google Scholar

[3] Anjaneyulu K., Venkatesh G., Optimization of process parameters of magnetic abrasive finishing using jaya algorithm, Materials Today: Proceedings 41 (2021) 1035-1040.

DOI: 10.1016/j.matpr.2020.06.568

Google Scholar

[4] Zelinko A., Welzel F., Biermann D., Maiboroda V., Tool type and macrostructure for magnetic abrasive finishing of flat surfaces on CNC machine tools, Production Engineering (2022) 1-11.

DOI: 10.1007/s11740-021-01097-5

Google Scholar

[5] Zou Y., Xie H., Dong C., Wu J., Study on complex micro surface finishing of alumina ceramic by the magnetic abrasive finishing process using alternating magnetic field, Int. J. Adv. Manuf. Technol. 97(5-8) (2018) 2193-2202.

DOI: 10.1007/s00170-018-2064-0

Google Scholar

[6] Xie H., Zou Y., Study on the magnetic abrasive finishing process using alternating magnetic field—discussion on the influence of current waveform variation, Int. J. Adv. Manuf. Technol. 114(7) (2021) 2471-2483.

DOI: 10.1007/s00170-021-07048-9

Google Scholar