Prediction of Residual Stress in Carbon Fiber Reinforced LM- PAEK Composites

Abstract:

Residual internal stresses arise during thermal processing of thermoplastic composites due to differential shrinkage of stacked orthotropic plies and can lead to defects such as shape distortion, microcracking or delamination. In the current study, a comprehensive thermomechanical model for predicting residual stresses and strains in semicrystalline thermoplastic composites is presented with specific application to unidirectional Carbon fiber reinforced LM-PAEK composite laminates. The model is based on an incremental Classical Laminate Theory (CLT) framework that incorporates temperature-dependent material properties and accounts for both thermal and crystallization-induced shrinkage effects. Material characterization is performed to measure key temperature-dependent properties: thermomechanical analysis (TMA) is used to measure the transverse thermal expansion coefficient (CTE) and crystallization shrinkage upon cooling from melt state, dynamic mechanical analysis (DMA) to obtain the transverse modulus. The stress-free temperature, the temperature at which residual stresses begin to develop, is identified through curvature evolution measurements of unsymmetric laminates using image analysis. The model validation is performed via curvature measurements of unsymmetric cross-ply laminates using laser scanning techniques, demonstrating good agreement between model predictions and experimental measurements.

• Periodical: Materials Science Forum (Volume 1182)
• Pages: 113-123
• DOI: https://doi.org/10.4028/p-H1MHkN
• Online since: April 2026
• Authors: Manoj R. Gongati*, Laurent Warnet, Francesco Rondina, Edwin T.J. Klompen, Remko Akkerman
• Keywords: Residual Stress, Thermoplastic Composites, Unsymmetric Laminates

References

[1] Ageorges, C., & Ye, L. (2012). Fusion bonding of polymer composites. Springer Science & Business Media.

[2] Baran, I., Cinar, K., Ersoy, N., Akkerman, R., & Hattel, J. H. (2017). A review on the mechanical modeling of composite manufacturing processes. Archives of Computational Methods in Engineering, 24(2), 365–395.

DOI: 10.1007/s11831-016-9167-2

[3] Parlevliet, P. P., Bersee, H. E. N., & Beukers, A. (2006). Residual stresses in thermoplastic composites—A study of the literature—Part I: Formation of residual stresses. Composites Part A: Applied Science and Manufacturing, 37(11), 1847–1857.

DOI: 10.1016/j.compositesa.2005.12.025

[4] Shokrieh, M. M. (Ed.). (2021). Residual stresses in composite materials. Woodhead publishing.

[5] Lawrence, W. E., Seferis, J. C., & Gillespie, J. W., Jr. (1992). Material response of a semicrystalline thermoplastic polymer and composite in relation to process cooling history. Polymer Composites, 13(2), 86–96.

DOI: 10.1002/pc.750130204

[6] Péron, M., Barasinski, A., Krawczak, P., & Chinesta, F. (2020). Measurement and prediction of residual strains and stresses during the cooling of a glass fiber reinforced PA66 matrix composite. Composites Part A: Applied Science and Manufacturing, 137, 106039.

DOI: 10.1016/j.compositesa.2020.106039

[7] Parambil, N. K., Chen, B. R., & Gillespie, J. W., Jr. (2024). Process-induced residual stress in a single carbon fiber semicrystalline polypropylene thin film. Composites Part A: Applied Science and Manufacturing, 178, 107969.

DOI: 10.1016/j.compositesa.2023.107969

[8] Daniel, I. M., Ishai, O., Daniel, I. M., & Daniel, I. (1994). Engineering mechanics of composite materials (Vol. 3, pp.256-256). New York: Oxford university press.

[9] Péron, M., El Bayssari, A. M., Barasinski, A., Jacquemin, F., Daghia, F., & Guillon, D. (2025). Residual stresses and strains during laser assisted tape placement of thermoplastic composite: Multi-physical modelling and experimental validation. Composites Part A: Applied Science and Manufacturing, 109478.

DOI: 10.1016/j.compositesa.2025.109478

[10] Jeronimidis, G., & Parkyn, A. T. (1988). Residual stresses in carbon fiber–thermoplastic matrix laminates. Journal of Composite Materials, 22(5), 401–415.

DOI: 10.1177/002199838802200502

[11] Barnes, J. A., & Byerly, G. E. (1994). The formation of residual stresses in laminated thermoplastic composites. Composites Science and Technology, 51(4), 479–494.

DOI: 10.1016/0266-3538(94)90081-7

[12] Toray Advanced Composites. Toray Cetex® TC1225 LMPAEK™ product data sheet https://www.toraytac.com/media/3bd72fac-0406-48e4-bfc4-2ffd2398ac0c/zipxIA/TAC/Documents/Data_sheets/Thermoplastic/UDtapes%2Cprepregsandlaminates/Toray-Cetex-TC1225_PAEK_PDS.pdf.

DOI: 10.33599/nasampe/s.25.0208

[13] ASTM, E. (2006). 831-06; Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis. ASTM International: West Conshohocken, PA, USA.

[14] Lebrun, G., & Denault, J. (2010). Effect of annealing on the thermal expansion and residual stresses of bidirectional thermoplastic composite laminates. Composites Part A: Applied Science and Manufacturing, 41(1), 101–107.

DOI: 10.1016/j.compositesa.2009.09.009

[15] Golzar, M., Sinke, J., & Abouhamzeh, M. (2022). Novel thermomechanical characterization for shrinkage evolution of unidirectional semi-crystalline thermoplastic prepregs (PPS/CF) in melt, rubbery, and glassy states. Composites Part A: Applied Science and Manufacturing, 156, 106879.

DOI: 10.1016/j.compositesa.2022.106879

[16] ASTM International. (2015). ASTM D5023-15: Standard test method for plastics: Dynamic mechanical properties in flexure (three-point bending).

DOI: 10.1520/d5023-99

[17] Kravchenko, O. G., Kravchenko, S. G., & Pipes, R. B. (2016). Chemical and thermal shrinkage in thermosetting prepreg. Composites Part A: Applied Science and Manufacturing, 80, 72–81.

DOI: 10.1016/j.compositesa.2015.10.001

[18] Donderwinkel, T. G., van Drongelen, M., & Akkerman, R. (2016). Stamp forming optimization for formability and crystallinity. In Proceedings of the 19th International ESAFORM Conference on Material Forming (ESAFORM 2016). AIP Publishing.

DOI: 10.1063/1.4963585