Characterization of Spent Ni-MH Batteries

Abstract:

Spent Ni-MH batteries are not considered too dangerous for the environment, but they have a considerable economical value due to the chemical composition of electrodes which are highly concentrated in metals. The present work aimed at the physical and chemical characterisation of spent cylindrical and thin prismatic Ni-MH batteries, contributing for a better definition of the recycling process of these spent products. The electrode materials correspond to more than 50% of the batteries weight and contain essentially nickel and rare earths (RE), and other secondary elements (Co, Mn, Al). The remaining components are the steel parts from the external case and supporting grids (near 30%) containing Fe and Ni, and the plastic components (<10%). Elemental quantitative analysis showed that the electrodes are highly concentrated in metals. Phase identification by X-ray powder diffraction combined with chemical analysis and leaching experiments allowed advancing the electrode materials composition. The cathode is essentially constituted by 6% metallic Ni, 66% Ni(OH)₂, 4.3% Co(OH)₂ and the anode consists mainly in 62% RENi₅ and 17% of substitutes and/or additives such as Co, Mn and Al.

• Periodical: Materials Science Forum (Volumes 730-732)
• Pages: 569-574
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.730-732.569
• Online since: November 2012
• Authors: Marta Cabral, Fernanda Margarido, Carlos A. Nogueira
• Keywords: Characterization, Ni-MH Battery, Recycling, Waste

References

[1] C. Lupi, D. Pilone, Ni-MH spent batteries: a raw material to produce Ni-Co alloys, Waste Manage. 22 (2002) 871-874.

DOI: 10.1016/s0956-053x(02)00074-0

[2] T. Muller, B. Friedrich, Development of a recycling process for nickel-metal hydride batteries, J. Power Sources 158 (2006) 1498-1509.

DOI: 10.1016/j.jpowsour.2005.10.046

[3] D. Linden, Sealed nickel-metal hydride batteries, In: D. Linden (Ed.), Handbook of Batteries, second ed. McGraw-Hill Inc., New York, Chapter 33, 1995, p.33.1-33.29.

[4] R.C. Ambrosio, E.A. Ticianelli, Nickel-metal hydride batteries, an alternative for the nickel-cadmium batteries, Quim. Nova 24(2) (2001) 243-246.

[5] J.A.S. Tenório, D.C.R. Espinosa, Recovery of Ni-based alloys from spent Ni-MH batteries, J. Power Sources 108 (2002) 70-73.

DOI: 10.1016/s0378-7753(02)00007-1

[6] M.A. Rabah, F.E. Farghaly, M.A. Abd-El Motaleb, Recovery of nickel, cobalt and some salts from spent Ni-MH batteries, Waste Manage. 28 (2008) 1159-1167.

DOI: 10.1016/j.wasman.2007.06.007

[7] D.A. Bertuol, A.M. Bernardes, J.A.S. Tenório, Spent NiMH batteries: Characterization and metal recovery through mechanical processing, J. Power Sources 160 (2006) 1465-1470.

DOI: 10.1016/j.jpowsour.2006.02.091

[8] J. Chen, D.H. Bradhurst, S.X. Dou, H.K. Liu, Nickel hydroxide as an active material for the positive electrode in rechargeable alkaline batteries, J. Electrochem. Soc. 146 (1999) 3606-3612.

DOI: 10.1149/1.1392522

[9] C.A. Nogueira, F. Margarido, Chemical and physical characterization of electrode materials of spent sealed Ni-Cd batteries, Waste Manage. 27 (2007) 1570-1579.

DOI: 10.1016/j.wasman.2006.10.007