Assessment of the Advantages of Static Shoulder FSW for Joining Aluminium Aerospace Alloys

Abstract:

Stationary (or Static) Shoulder Friction Stir Welding (SS-FSW) is a variant of FSW that was developed primarily to improve the weldability of titanium alloys by reducing the through thickness temperature gradient. Surprisingly, SS-FSW has been largely ignored by the Al welding community because it is widely supposed a rotating shoulder is an essential aspect of the process and that the higher conductivity means the surface heating effect of the shoulder is generally beneficial. In the work presented it is shown that SS-FSW has major advantages when welding high strength aluminium alloys; including a reduction in the heat input, a massive improvement in surface quality, and a narrower and more symmetric temperature distribution, which leads to narrower welds with a reduced heat affected zone width and lower distortion. The reasons for these benefits are discussed based on a systematic study aimed at directly comparing both processes.

• Periodical: Materials Science Forum (Volumes 783-786)
• Pages: 1770-1775
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.783-786.1770
• Online since: May 2014
• Authors: Hao Wu*, Ying Chun Chen, David Strong, Phil B. Prangnell
• Keywords: AA7050, Distortion, Friction Stir Welding (FSW), Stationary Shoulder, Thermal Modelling

References

[1] P. L. Threadgill1, A. J. Leonard, H. R. Shercliff and P. J. Withers, Friction stir welding of aluminium alloys, Int. Materials Reviews 54 (2009) 49-93.

DOI: 10.1179/174328009x411136

[2] M.J. Russell, M.E. Nunn, J. Martin, Recent developments in the stationary shoulder FSW of Titanium alloys, 7th Int. Symp. on Friction Stir Welding, Japan, 2008, pub. TWI, 10B.

[3] M.M.Z. Ahmed, B.P. Wynne, W.M. Rainforth and P.L. Threadgill, Through-thickness crystallographic texture of stationary shoulder FSW aluminium, Scripta Mater. 64 (2011) 45–48.

DOI: 10.1016/j.scriptamat.2010.08.060

[4] H Schmidt, J Hattel and J Wert, analytical model for the heat generation in friction stir welding, Modelling Simul. Mater. Sci. Eng. 12 (2004) 143–157.

DOI: 10.1088/0965-0393/12/1/013

[5] T. Long, W. Tang and A. P. Reynolds, Process response parameter relationships in aluminium alloy friction stir welds, Sci. Technol. Welding and Joining 12 (2007) 311-37.

DOI: 10.1179/174329307x197566

[6] N. Kamp, A. Sullivan, R. Tomasi, J.D. Robson, Modelling of heterogeneous precipitate distribution evolution during friction stir welding process, Acta Materialia 54 (2006) 2003–(2014).

DOI: 10.1016/j.actamat.2005.12.024

[7] S. Cui, Z.W. Chen, J.D. Robson, A model relating tool torque and its associated power to rotation and forward speeds during FSW, Int. J. Machine Tools & Manu. 50 (2010) 1023–1030.

DOI: 10.1016/j.ijmachtools.2010.09.005