Study of Alkalization to the Crystallinity and the Thermal Behavior of Arenga Pinnata “Ijuk” Fibers-Based Polylactic Acid (PLA) Biocomposite

Abstract:

The pollution due to non-degradable material such as plastics, has led to studies about the development of environmental-friendly materials. Because of natural sources-based materials and their biodegradability, polylactid acid (PLA) and ijuk fiber are interesting to be modified into a composite. Furthermore this study is also expected to reduce the impact of environmental problems. Surface modification of ijuk fiber through alkalinization, was aimed to enhance compatibility between the ijuk fiber and the PLA, in order to improve properties of the composite such as crytallinity and thermal behavior. To investigate in detail about this modification, this research also studied effect of the alkalinized ijuk fiber and the PLA composition to the crystallinity and the thermal behavior of the composites. The experimental results were investigated by FTIR to qualitatively analyze compounds content in the ijuk fiber before and after alkalinization, DSC and TGA to study crystallinity and thermal stability behavior of the composite, respectively and FE-SEM to observe morphological behavior like compatibility between the ijuk fiber and the PLA. The FE-SEM observation showed that alkalinization of the ijuk fiber led to wettability enhancement between the ijuk fiber and the PLA. This may be caused by annihilating lignin and hemicellulose. Furthermore this treatment leads to expose micro-fibril cellulose (MFC) in the ijuk fiber and then to enhancement of bonding affinity with the PLA. This phenomenon gives a possibility for the PLA in the composite to increase its crystallinity due to nucleating effect of crystalline parts in the MFC. DSC measurements show that addition of the alkalinized ijuk fiber tends to increase the crystallinity of PLA in the composites.Keywords: alkalization, Arenga Pinnata, compatibility, crystallinity, PLA, thermal stability

• Periodical: Materials Science Forum (Volume 827)
• Pages: 326-331
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.827.326
• Online since: August 2015
• Authors: Mochamad Chalid*, Evana Yuanita, Juniko Pratama
• Keywords: Alkalization, Arenga Pinnata, Compatibility, Crystallinity, PLA, Thermal Stability

References

[1] M. John, S. Thomas, Biofibres and biocomposites, Carbohydr Polym., 71 (2008) 343–64.

[2] M. Chalid, H. J. Heeres, A. A. Broekhuis, Ring-opening of γ-Valerolactone with Amino Compounds, J. Appl. Pol. Sci., 123(6) (2012) 3556-3564.

DOI: 10.1002/app.34842

[3] M. Chalid, H.J. Heeres, A.A. Broekhuis, A Study of The Structure of Novel Polyurethanes derived from g-Valerolactone-based Diol Precursors, Adv. Mat. Res., 789 (2013) 275-278.

DOI: 10.4028/www.scientific.net/amr.789.274

[4] M. Chalid, A.S. Handayani E. Budianto, Functionalization of Starch for Macro-initiator of Atomic Transfer Radical Polymerization (ATRP), Adv. Mat. Res., 1051 (2014) 90-94.

DOI: 10.4028/www.scientific.net/amr.1051.90

[5] G. Donal, A Literature Review of Poly(Lactic Acid), J. Polym. . Env., 9(2) (2001) 63-84.

[6] D. Cohn, A.H. Salomon, Designing biodegradable multiblock PCL/PLA thermoplastic elastomer, J. Biomat. 26(2005) 2297-2305.

DOI: 10.1016/j.biomaterials.2004.07.052

[7] S.H. Masud, T.D. Lawrence, M. Manjusri, A study on biocomposites from recycled newspaper fiber and poly(lactic acid), Ind Eng Chem Res 44(2005) 5593-5601.

DOI: 10.1021/ie0488849

[8] A.K.M. M Alam, M.D.H. Beg, M.F. Mina, M.R. Khan, D.R.M. Prasad, Structures and performances of simultaneous ultrasound and alkali treated oil palm empty fruit bunch fiber reinforced poly(lactic acid) composites, Journal Composites: Part A 43 (2012).

DOI: 10.1016/j.compositesa.2012.06.012

[9] Y. Tao, L. Yan, R Jie, Preparation and properties of short natural fiber reinforced poly(lactic acid) composites. Met Soc China 19 (2009) s651-s655.

DOI: 10.1016/s1003-6326(10)60126-4

[10] S. Lisman, N.N. Antonio, Y. Hiroyuki, The effect of crystallization of PLA on the thermal and mechanical properties of micro-fibrillated cellulose-reinforced PLA composites, J. Comp. Scie. Tech. 69 (2009) 1187–1192.

DOI: 10.1016/j.compscitech.2009.02.022

[11] M.R. Ishak, Z. Leman, S.M. Sapuan, M.Y. Salleh, S. Misri, The Effect Of Sea Water Treatment On The Impact And Flexural Strength of Sugar Palm Fibre Reinforced Epoxy Composites, J. Mech Mat. Eng. 4(3) (2009) 316-320.

[12] J. Sahari, S.M. Sapuan, Natural fibre reinforced biodegradable polymer composites, Rev Adv. Mat. Scie., 30 (2011) 14–34.

[13] A.K. Mohanty, M. Misra, L.T. Drzal, Improvement in the mechanical properties of PLA and bamboo fiber biocomp. by fiber surface modification, J. Comp. Mat, 48 (2014) 2567-2577.

[14] K. Stana-Kleinschek, V. Ribitsch , T. Kreze, M. Sfiligoj-Smole, Z. Persin, Correlation of regenerated cellulose fibres morphology and surface free energy components, Lenzinger Berichte 82 (2003) 83–95.

DOI: 10.1080/14328917.2005.11784873

[15] M.M. Kabir, H. Wang, K.T. Lau, F. Cardona, Chemical treatments on plant-based natural fibre reinforced polymer composites: An overview, Comp.: Part B, 43 (2012). 2883–2892.

DOI: 10.1016/j.compositesb.2012.04.053

[16] YM. Mwaikambo, MP. Ansell, The effect of chemical treatment on the propertiesof hemp, sisal, jute and kapok fibres for composite reinforcement, Angew Makromol Chem, 272 (1999) 108–16.

DOI: 10.1002/(sici)1522-9505(19991201)272:1<108::aid-apmc108>3.0.co;2-9