Molar Ratio and Polymer Modification Influence to Water Glass Coatings Matrix Basic Properties

Zdeněk Šnirch; Ámos Dufka; Jana Hodná

doi:10.4028/www.scientific.net/MSF.865.72

Paper Titles

Mechanical Properties of Alkali-Activated Material with Waste Aggregate According to Porosity
p.53

Influence of Aluminous Cement on the Hardening Rate of Cement-Based Stucco Mortars
p.57

Utilization of Nanofibers in Sintered Ceramic Body Based on Calcium Aluminous Cement
p.62

Effect of Polymer Admixtures on Metakaolin-Based Geopolymer
p.67

Molar Ratio and Polymer Modification Influence to Water Glass Coatings Matrix Basic Properties
p.72

Utilization of Inorganic Binders for the Mineralization of Natural Fibers
p.77

Initial Analysis for Study of Pure Limestone Decarbonation
p.81

The Development of Coating Systems Based on Alkali Activated Slag for Protecting Reinforced Concrete Structures
p.87

Sulfate Resistance of Alkali Activated Cements
p.95

HomeMaterials Science ForumMaterials Science Forum Vol. 865Molar Ratio and Polymer Modification Influence to...

Molar Ratio and Polymer Modification Influence to Water Glass Coatings Matrix Basic Properties

Abstract:

This paper contains the continuation of basic research from 2012 - the molar ratio influence to water glass coatings basic properties (adhesion, diffusion properties, surface quality) was expanded with basic resistance (combination of sun, UV light and rain). Most silicate coatings for concrete protection are currently based on potassium water glass. Water glass matrix itself is, however, insufficient for coatings matrix and often is modified by polymer substances for the coating purpose. Combinations of water glass basic matrix (Sodium, Potassium, Lithium, Sodium - Lithium and Potassium - Lithium) with the appropriate polymer modifiers is also content of the presented paper. Polymer dispersions modification effect to basic properties and resistance to developed silicate coating binder is also part of paper.

You might also be interested in these eBooks

Binders, Materials and Technologies in Modern Construction II

View Preview

Info:

Periodical:

Materials Science Forum (Volume 865)

Pages:

72-76

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.865.72

Citation:

Cite this paper

Online since:

August 2016

Authors:

Zdeněk Šnirch*, Ámos Dufka, Jana Hodná

Keywords:

Adhesion, Binder, Coating, Concrete, Diffusion, Lithium, Polymer, Potassium, Silicate, Sodium, Surface, Water Glass

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] BYDŽOVSKÝ, J.; ŠNIRCH, Z. Repair system for concrete structures with utilize of waste products. 2nd Fib Congress 1. Neapol, 2006. pp.590-595. ISBN 88-89972-06-8.

Google Scholar

[2] Pantazica, M., +collective. Surface insulation resistance testing of solder pastes with protective rating, (2012) International Spring Seminar on Electronics Technology, pp.168-172. ISBN: 978-146732240-9.

DOI: 10.1109/isse.2012.6273132

Google Scholar

[3] OHAMA, Y: Polymer-based materials for repair and improved durability: Japanese experience , Construction and Building Materiále 1996, únor 1996, str 77-82.

DOI: 10.1016/0950-0618(95)00063-1

Google Scholar

[4] ŠNIRCH, Z. Silicates (water glasses) coatings matrix possibilities. Advances in Mathematical and Computational Methods. 2012. 2013(5). pp.266-269. ISSN 2227-4588.

Google Scholar