On the Primary Solidification of Compacted Graphite Iron: Microstructure Evolution during Isothermal Coarsening

Abstract:

It is widely accepted that in most commercial hypoeutectic alloys, both static mechanical properties and feeding characteristics during solidification, are extremely linked to the coarseness of the primary phase. It is therefore of critical importance to provide tools to control and predict the coarsening process of the dendritic phase present in hypoeutectic melts. The characterization of the primary phase, a product of the primary solidification, has traditionally been neglected when compared to the eutectic solidification characterization in cast iron investigations. This work presents the morphological evolution of the primary austenite present in a hypoeutectic compacted graphite cast iron (CGI) under isothermal conditions. To that purpose, a base spheroidal graphite cast iron (SGI) material with high Mg content is re-melted in a controlled atmosphere and reversed into a CGI melt by controlling the Mg fading. An experimental isothermal profile is applied to the solidification process of the experimental alloy to promote an isothermal coarsening process of the primary austenite dendrite network during solid and liquid coexistence. Through interrupted solidification experiments, the primary austenite is preserved and observed at room temperature. By application of stereological relations, the primary phase and its isothermal coarsening process are characterized as a function of the coarsening time applied. The microstructural evolution observed in the primary austenite in CGI and the measured morphological parameters show a similar trend to that observed for lamellar graphite cast iron (LGI) in previous investigations. The modulus of the primary austenite, Mγ, and the nearest distance between the centre of gravity of neighbouring austenite particles, Dγ, followed a linear relation with the cube root of coarsening time.

• Periodical: Materials Science Forum (Volume 925)
• Pages: 90-97
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.925.90
• Online since: June 2018
• Authors: Juan Carlos Hernando*, Attila Diószegi
• Keywords: Compacted Graphite Iron (CGI), Dendritic Coarsening, Microstructure Evolution, Primary Austenite

References

[1] M. König, Literature review of microstructure formation in compacted graphite Iron, Int. J. Cast Met. Res. 23(3) (2010) 185-192.

DOI: 10.1179/136404609x12535244328378

[2] S. Dawson, T. Schroeder, Practical Applications for Compacted Graphite Iron, AFS Trans. (2004).

[3] D. Holmgren, Review of thermal conductivity of cast iron, Int. J. Cast Met. Res. 18(6) (2005) 331-345.

DOI: 10.1179/136404605225023153

[4] V. Fourlakidis, A. Diószegi, A generic model to predict the ultimate tensile strength in pearlitic lamellar graphite iron, Mater. Sci. Eng., A 618 (2014) 161-167.

DOI: 10.1016/j.msea.2014.08.061

[5] L. Elmquist, A. Diószegi, Relation between SDAS and eutectic cell size in grey iron, Int. J. Cast Met. Res. 23(4) (2010) 240-245.

DOI: 10.1179/136404610x12693537269895

[6] D. Kammer, P.W. Voorhees, The morphological evolution of dendritic microstructures during coarsening, Acta Mater. 54(6) (2006) 1549-1558.

DOI: 10.1016/j.actamat.2005.11.031

[7] P.W. Voorhees, The Theory of Ostwald Ripening, J. Stat. Phys. 38(1-2) (1985) 231-252.

[8] J.L. Fife, P.W. Voorhees, The morphological evolution of equiaxed dendritic microstructures during coarsening, Acta Mater. 57(8) (2009) 2418-2428.

DOI: 10.1016/j.actamat.2009.01.036

[9] D.M. Stefanescu, Science and Engineering of Casting Solidification, Springer International Publishing, (2015).

[10] M.C. Flemings, T.Z. Kattamis, B.P. Bardes, Dendrite Arm Spacing in Aluminiun Alloys, in: AFS (Ed.) AFS Trans. 1991, pp.501-506.

[11] L. Ratke, Effect of fraction solid on coarsening of secondary dendrite arms, Int. J. Cast Met. Res. 22(1-4) (2009) 268-270.

DOI: 10.1179/136404609x367911

[12] M.C. Flemings, Coarsening in Solidification Processing, Mater. Trans. 46(5) (2005) 895-900.

DOI: 10.2320/matertrans.46.895

[13] T. Cool, P.W. Voorhees, The evolution of dendrites during coarsening: Fragmentation and morphology, Acta Mater. 127 (2017) 359-367.

DOI: 10.1016/j.actamat.2017.01.029

[14] J.C. Hernando, E. Ghassemali, A. Diószegi, The morphological evolution of primary austenite during isothermal coarsening, Mater. Charact. 131 (2017) 492-499.

DOI: 10.1016/j.matchar.2017.07.030

[15] S.P. Marsh, M.E. Glicksman, Overview of Geometric Effects on Coarsening of Mushy Zones, Metall. Mater. Trans. A 27(3) (1996) 557-567.

DOI: 10.1007/bf02648946

[16] R. Lora, A. Diószegi, Dynamic Coarsening of 3.3C–1.9Si Gray Cast Iron, Metall. Mater. Trans. A 43(13) (2012) 5165-5172.

DOI: 10.1007/s11661-012-1244-z

[17] J.C. Hernando, B. Domeij, D. González, J.M. Amieva, A. Diószegi, New Experimental Technique for Nodularity and Mg Fading Control in Compacted Graphite Iron Production on Laboratory Scale, Metall. Mater. Trans. A 48(11) (2017) 5432-5441.

DOI: 10.1007/s11661-017-4315-3

[18] J.C. Hernando, A. Diószegi, An Overview of Isothermal Coarsening in Hypoeutectic Lamellar Cast Iron, Advances in the Science and Engineering of Casting Solidification, John Wiley & Sons, Inc.2015, pp.295-302.

DOI: 10.1007/978-3-319-48117-3_35

[19] B. Domeij, J.C. Hernando, A. Diószegi, Quantification of Dendritic Austenite After Interrupted Solidification in a Hypoeutectic Lamellar Graphite Iron, Metallogr. Microstruct. Anal. 5 (1) (2016) 28-42.

DOI: 10.1007/s13632-015-0250-0

[20] ISO, ISO 16112: Compacted (vermicular) graphite cast irons — Classification, (2017).

[21] J.M. Motz, Microsegregations-An easily unnoticed influencing variable in the structural description of cast materials, Prakt. Metallogr. - PR. M. 25 (1988) 285–293.

DOI: 10.1515/pm-1988-250605