Paper Titles
Development of Composite Materials for 3d Printing on the Basis of Polyphenylenesulfone
p.15
Mechanical Properties of Samples of Polyphenylene Sulfone Obtained by the 3D-Printing Method
p.21
Methods for the Synthesis of Polyethereketone
p.27
Thermal Stability of Polyetherketones
p.31
Investigation of the Crystallization of Polyetherketones by the Differential Scanning Calorimetry Method
p.36
Study of the Effect of Processing Cycles on the Thermophysical Properties of Polyether Ether Ketone
p.40
Acrylate and Methacrylate Guanidine-Ionic Liquids for Dissolution of Cellulose
p.45
A Disperse Nanofiller Aggregation in Polymer Nanocomposites: Description within the Framework of Irreversible Aggregation Model
p.49
A Carbon Nanotubes Aggregation in Polymer Nanocomposites
p.55

Investigation of the Crystallization of Polyetherketones by the Differential Scanning Calorimetry Method

Article Preview

Abstract:

Differential scanning calorimetry was used to study the temperatures and character of phase transitions of fibers based on polyether ether ketones. It is shown that in the production of fine fibers from polyether ether ketones, a predominantly amorphous structure is formed. Increasing the temperature to the crystallization temperature leads to an almost twofold increase in the degree of crystallinity. Lower molecular weight polyether ether ketone is characterized by a higher rate of crystallization and the formation of a more homogeneous crystalline structure.

You might also be interested in these eBooks
XIV International Scientific and Practical Conference "New Polymer Composite Materials" View Preview

Info:

Periodical:

Materials Science Forum (Volume 935)

Pages:

36-39

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.935.36

Citation:

Cite this paper

Online since:

October 2018

Authors:

Azamat A. Zhansitov, Azamat L. Slonov, Artyr E. Baikaziev, Marina M. Murzakanova, S.Yu. Khashirova

Keywords:

Crystallinity, Differential Scanning Calorimetry, Polyether Ether Ketone, Synthetic Fibers

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2018 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

References

[1] A.A. Zhansitov, A.L. Slonov, R.A. Shetov, A.E. Baikaziev, K.T. Shakhmurzova, Zh.I. Kurdanova, S.Yu. Khashirova, Synthesis and properties of polyether ether ketones for 3D printing, Fibre Chemistry. 49 (6) (2018) 414-419.

DOI: 10.1007/s10692-018-9911-5

Google Scholar

[2] Gibson, I. Material properties and fabrication parameters in selective laser sintering process / I.Gibson, D.P. Shi // Rapid prototyping journal. – 1997. – V. 3. – № 4. – Р. 129-136.

DOI: 10.1108/13552549710191836

Google Scholar

[3] Wu, W. Influence of Layer Thickness and Raster Angle on the Mechanical Properties of 3D-Printed PEEK and a Comparative Mechanical Study between PEEK and ABS / W.Wu, P.Geng, G.Li, D.Zhao, H.Zhang, J.Zhao // Materials. – 2015. – V. 8. – Р. 5834-5846.

DOI: 10.3390/ma8095271

Google Scholar

[4] Yang, C. Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material / C.Yang, X.Tian, D.Li, Y.Cao, F.Zhao, C.Shi // J. Mater. Process. Technol. – 2017. – V. 248. – Р. 1-7.

DOI: 10.1016/j.jmatprotec.2017.04.027

Google Scholar

[5] Berretta, S. Process ability of PEEK, a new polymer for High Temperature Laser Sintering (HT-LS)/S.Berretta, K.E. Evans, O.Ghita // Virtual Phys. Prototyp. – 2015. – V. 10. – Р. 1-13.

DOI: 10.1016/j.eurpolymj.2015.04.003

Google Scholar