Preparation and Properties of SBS Modified Deoiled Asphalt and Slurry Blends

Abstract:

Deoiled asphalt (DOA) and slurry are by-products of petroleum refining process. In this paper, blending asphalt (DST) based on DOA, slurry and vacuum gas oil and SBS modified DST (SMDST) were prepared. The aging resistance of SMDST was investigated by thermal aging (TA) and ultraviolet (UV) aging. Meanwhile, the chemical structure and microstructure of SMDST before and after aging were characterized by Fourier transform infrared spectroscopy (FTIR) and fluorescence microscopy. The results showed that the softening point, ductility at 5 °C and low temperature flexibility of SMDST increased gradually with the increase of SBS content. When SBS content was 12 wt%, the softening point, ductility at 5 °C and low temperature flexibility of SMDST were 105 °C, 55 cm and -25 °C, respectively. After TA and UV, the low temperature flexible reductions of SMDST with 12 wt% SBS were 3 °C and 2 °C, respectively, which demonstrated that aged SMDST still had good crack resistance in low temperature. FTIR analysis indicated that the carbonyl (C=O) and the sulfoxide (S=O) characteristic peaks of SMDST were enhanced after aging to a certain extent. However, the fluorescence microscope observation showed the network structure of SMDSB was not damaged significantly, which implies that SMDST has a favourable anti-aging performance.

• Periodical: Materials Science Forum (Volume 944)
• Pages: 1252-1258
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.944.1252
• Online since: January 2019
• Authors: Yi Gu, Yu Shi Li, Xiao Qiao Huang, Jian Ying Yu
• Keywords: Aging Resistance, Deoiled Asphalt, Physical Property, SBS, Slurry

References

[1] Speight J G. The chemistry and technology of petroleum[J]. Applied Catalysis, 1980, 2(6): 406-407.

[2] Dong P, Wang C, Zhao S. Preparation of high performance electrorheological fluids with coke-like particles from FCC slurry conversion[J]. Fuel, 2005, 84(6): 685-689.

DOI: 10.1016/j.fuel.2004.03.021

[3] Yang J, Yuan S, Yang Y, et al. Development of downstream product of FCC slurry[J]. Petroleum Refinery Engineering, 2005, 35(11): 21-24.

[4] Kwek W, Khan M K, Sarkar B, et al. A non-catalytic, supercritical methanol route for producing high-yield saturated and aromatic compounds from de-oiled asphaltenes[J]. Journal of Supercritical Fluids, 2017, 120: 140-150.

DOI: 10.1016/j.supflu.2016.11.001

[5] Zhang Yongxin. Separation and complex utilization of FCC oil slurry[J]. Science & Technology of Lcic, 2003, 21(2): 92-95.

[6] Li Mingbo, Li Rui, Sheng Xingyue. Use of de-oiled asphalt in pouring asphalt[J]. Shanxi Architecture, 2015, 41(20): 121-122.

[7] Li H P, Shen J. Production of paving asphalt by blending RFCC slurry in deoiled asphalt[J]. Petroleum Science & Technology, 2009, 27(1): 46-55.

DOI: 10.1080/10916460701699751

[8] Shi-Bin L I, Sun Q Q, Zhang Z L, et al. Study on modifiction of de-oiled asphalt and its application[J]. Science Technology & Engineering, 2014, 14(9): 147-150.

[9] Liu S, Cao W, Fang J, et al. Variance analysis and performance evaluation of different crumb rubber modified (CRM) asphalt[J]. Construction & Building Materials, 2009, 23(7): 2701-2708.

DOI: 10.1016/j.conbuildmat.2008.12.009

[10] Liang M, Liu S, Fan W, et al. Rheological and chemical characterization of deoiled asphalt modified with FCC slurry[J]. Materials & Structures, 2016, 49(9): 3607-3617.

DOI: 10.1617/s11527-015-0743-y

[11] Cheng J, Luo Y, Liu Y. Exploration on options for production of road asphalt from deoiled asphalt[J]. Petroleum Refinery Engineering, 1999, 19(4): 7-12.

[12] Speight J. Asphalt Materials Science and Technology[J]. Mrs Bulletin, 2015, 41(11): 921-922.