Selective Separation Using Fluid-Liquid Interfaces

Abstract:

Interfaces between two fluid phases are a potential barrier for particles. Certain particles may not be able to pass such an interface, because they have to overcome a certain resistance. The latter depends on the strength of the interface, which is the surface tension. The second relevant property is the three phase wetting angle, which shows the fluid with the preferred wetting to the particle surface. It depends on the particle properties, like chemical composition, surface structure and surface modification. The third relevant parameter is the particle size. From these three main influence parameters it emerges that fluid-fluid interfaces can show a selectivity to special particle properties, which enables a separation of a particle mixture. Since there are possibilities to address the governing effects, the separation cut, size or composition cut respectively, can be engineered in a certain range. Separation at boundaries is feasible when the driving force is in the same order of magnitude as the retaining resistance force of the interface. The driving force is either the Brownian movement for very small particles or any field force like gravity or the centrifugal force. To describe the separation at interfaces it is necessary to understand the process of the phase transfer of particles through the interface, either the gas-liquid or the liquid-liquid interface between two immiscible liquids. In addition to the effects mentioned above, also dynamic phenomena such as surfactant depletion of the interface may have to be taken into account.

• Periodical: Materials Science Forum (Volume 959)
• Pages: 113-124
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.959.113
• Online since: June 2019
• Authors: Tom Leistner, Michael Türk, Alfred Weber, Christian Weber, Urs A. Peuker*
• Keywords: Classification, Particle Transfer, Sorting, Surface Tension, Tromp Curve

References

[1] Rudolph, M. and U.A. Peuker, Mapping hydrophobicity combining AFM and Raman spectroscopy. Minerals Engineering, 2014. 66-68: pp.181-190.

DOI: 10.1016/j.mineng.2014.05.010

[2] Aveyard, R. and J.H. Clint, Particle wettability and line tension. Journal of the Chemical Society, Faraday Transactions, 1996. 92(1): pp.85-89.

DOI: 10.1039/ft9969200085

[3] Nguyen, A. and H.J. Schulze, Colloidal science of flotation. 2003: CRC Press.

[4] Peuker, U.A. Interface transport of nano-particles - synthesis of oil-based magnetic fluids. in AIChE Annual Meeting, Conference Proceedings. (2006).

[5] Bresme, F. and M. Oettel, Nanoparticles at fluid interfaces. Journal of Physics: Condensed Matter, 2007. 19(41): p.413101.

DOI: 10.1088/0953-8984/19/41/413101

[6] Weber, A.P., et al., Production of Pharmaceutical Nanosuspensions in Bubble Columns with Simultaneous Particle Deposition and Agglomeration. Chemie-Ingenieur-Technik, 2016. 88(7): pp.971-983.

[7] Machunsky, S., et al., Liquid-Liquid Phase Transfer of Magnetite Nanoparticles. Colloids and Surfaces A:Physicochemical and Engineering Aspects, 2009. 348: pp.186-190.

DOI: 10.1016/j.colsurfa.2009.07.014

[8] Leistner, T., et al., Selektive Trennung sehr feiner Partikelsysteme mittels Flüssig/Flüssig-Flotation, Selective Separation of Ultrafine Particles Using Two-Liquid Flotation. Chemie Ingenieur Technik, 2014. 86(6): pp.831-839.

DOI: 10.1002/cite.201400011

[9] Erler, J., et al., Liquid–liquid phase transfer of magnetite nanoparticles — evaluation of surfactants. Powder Technology, 2013. 247(0): pp.265-269.

DOI: 10.1016/j.powtec.2012.09.047

[10] Leistner, T., M. Rudolph, and U.A. Peuker. Separation of ultrafine particles by two-liquid flotation: Selectivity and process behavior analysis. in IMPC 2014 - 27th International Mineral Processing Congress. (2014).

[11] Yamamoto, K., et al. Fabrication of oriented carbon nanotube ultrathin film using the liquid/liquid interface. in Polymer Preprints, Japan. (2006).

[12] Matsui, J., et al., Fabrication of densely packed multi-walled carbon nanotube ultrathin films using a liquid-liquid interface. Journal of Materials Chemistry, 2007. 17(36): pp.3806-3811.

DOI: 10.1039/b706695c

[13] Ziegler, K.J., et al., Length-dependent extraction of single-walled carbon nanotubes. Nano Letters, 2005. 5(12): pp.2355-2359.

DOI: 10.1021/nl0510208

[14] Yao, H., et al., Stepwise size-selective extraction of carboxylate-modified gold nanoparticles from an aqueous suspension into toluene with tetraoctylammonium cations. Chemistry of Materials, 2001. 13(12): pp.4692-4697.

DOI: 10.1021/cm0104957

[15] Hermeling, M., Partition von gasgetragenen Nanopartikeln in Modellblasensäulen. 2010, TU Clausthal Clausthal.