Numerical Study on the Melt Flow Length of the Composite Materials in the Injection Molding Process

Abstract:

Improving the melt flow length by increasing the mold temperature has been an issue encountered in the injection molding processes for composite products. In this study, an injection molding process was applied to a melt flow length model having a part thickness of 1.0 mm. The mold temperature varied from 30 °C to 110 °C. Six types of composite materials of polycaprolactam 6 (PA6) and glass fiber (GF) were selected to study the influence of mold temperature on the material filling in the injection molding process. The simulation results denoted that the mold temperature considerably influenced the flowability during the injection molding process, especially using 30% GF; further, the melt flow length was increased by 25.5% when the mold temperature was increased from 30 °C to 110 °C. In accordance with the simulation, our experiments demonstrated that we could achieve a mold temperature of 110 °C using all types of composite materials. Therefore, in this study, we denoted that both the simulation and experimental results of the melt flow length were comparable, thereby indicating a good agreement.

• Periodical: Materials Science Forum (Volume 971)
• Pages: 15-20
• DOI: https://doi.org/10.4028/www.scientific.net/MSF.971.15
• Online since: September 2019
• Authors: The Nhan Phan, Do Thanh Trung, Pham Son Minh*
• Keywords: Composite Material, Flow Length, Glass Fiber Percentage, Mold Temperature

References

[1] S.C. Chen, W.H. Liao, J.P. Yeh, R.D. Chien, Rheological behavior of PS polymer melt under ultra-high speed injection molding, Polym. Test. 31 (2012) 864-869.

DOI: 10.1016/j.polymertesting.2012.06.008

[2] M.S. Huang, T.Y. Lin, Simulation of a regression-model and PCA based searching method developed for setting the robust injection molding parameters of multi-quality characteristics, Int. J. Heat Mass Tran. 51 (2008) 5828-5837.

DOI: 10.1016/j.ijheatmasstransfer.2008.05.016

[3] F. Yu, H. Deng, Q. Zhang, K. Wang, C.L. Zhang, F. Chen, Q. Fu, Anisotropic multilayer conductive networks in carbon nanotubes filled polyethylene / polypropylene blends obtained through high speed thin wall injection molding, Polymer 54 (2013) 6425-6436.

DOI: 10.1016/j.polymer.2013.09.047

[4] M. Sortino, G. Totis, E. Kuljanic, Comparison of injection molding technologies for the production of micro-optical devices, Procedia Engineer. 69 (2014) 1296-1305.

DOI: 10.1016/j.proeng.2014.03.122

[5] M.K. Karasu, M. Cakmakci, M.B. Cakiroglu, E. Ayva, N. D. Ortabas, Improvement of changeover times via Taguchi empowered SMED/case study on injection molding production, Measurement 47 (2014) 741-748.

DOI: 10.1016/j.measurement.2013.09.035

[6] C.C. Tsai, S.M. Hsieh, H.E. Kao, Mechatronic design and injection speed control of an ultra-high-speed plastic injection molding machine, Mechatronics 19 (2009) 147-155.

DOI: 10.1016/j.mechatronics.2008.09.003

[7] H. Bormuth, High-speed injection moulding with Polypropylene, Mater. Design 5 (1984) 137-138.

DOI: 10.1016/0261-3069(84)90082-7

[8] K. Yao, F. Gao, F. Allgöwer, Barrel temperature control during operation transition in injection molding, Control Eng. Pract. 16 (2008) 1259-1264.

DOI: 10.1016/j.conengprac.2008.02.003

[9] S. Selvaraj, P. Venkataramaiah, Design and fabrication of an injection moulding tool for cam bush with baffle cooling channel and submarine gate, Procedia Engineer. 64 (2013) 1310-1319.

DOI: 10.1016/j.proeng.2013.09.212