Cam_Gate System in Product Quality Control, Optimal Selection of Inspecting-Sorting Automatic Machines

Abstract:

The paper addresses the possibilities of applying the cam_gate system to product quality control. Particular attention is paid to the concept of the test stand simulating the operation of the product quality control automatic machine with the use of the CCD camera. Dimensional parameters of rollers were measured by means of a micrometer screw and the CCD camera at the simulation stand in the cam_gate system and the results of measurements were compared. The paper presents the cost system structure of an enterprises and factors affecting the selection of inspecting-sorting automatic machines in the aspect of the prescribed quality parameters which condition the optimal selection.

• Periodical: Solid State Phenomena (Volume 198)
• Pages: 445-450
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.198.445
• Online since: March 2013
• Authors: Krzysztof Łasiński
• Keywords: CCD Camera, Control System, Cost Model of an Enterprises, Quality Features, Quality Related Selection of Parameters, Selection Algorithms, Simulation Stand

References

[1] A. Hamrol and W. Mantura: Quality management, theory and practice, PWN, Warsaw – Poznań (1998).

[2] A. Tomaszewski: Steering of machines and devices production quality, WNT, Warsaw, (1977).

[3] A. Hamrol: Quality assurance in the production processes, Publishing House of Poznan University of Technology, Poznań, (1995).

[4] E. Kindlarski: Quality inspection and steering. – Script, Publishing House of Warsaw University of Technology, Warsaw (1993).

[5] P. Żukowski: Targeting industrial company in mass production on the example of the furniture industry, PWN, Warsaw – Wroclaw (1989).

[6] K. Łasiński: Methods of quality control improvement for small-sized products with the use of inspecting-sorting automatic machines and robotized auxiliary elements, Monograph, Publishing House of the University of Zielona Gora, Zielona Gora (2009).

[7] W. Jakubiec and J. Malinowski: Metrology geometrical quantities, WNT, Warsaw (1993).

[8] Catalogue: Matlab: The Language of Technical Computing.

[9] S. Adamczak: Outlines methods of measurement of the roundness machine, Monograph, Publisher University of Technology Świętokrzyska of Kielce, Kielce (1998).

[10] Catalogue: Protech.

[11] Catalogue: Robopot.

[12] K. J. Wróblewski: Fundamentals of manufacturing flow control, WNT, Warsaw (1993).

[13] K. Łasiński: Facilities for automatic sorting for small-scale, VI Scientific and Technical Conference: Metrology in Production Engineering Techniques, Mechanical Engineering Committee and the Committee of Metrology and Scientific Instrumentation PAN, Rzeszow (21-22 September 1995).

[14] J. Dahlgaard and J. K. Kristesen and K. Gopal Kanzi: Fundamentals of Quality Management, PWN, Warsaw (2000).

[15] K. Łasiński and A. Brukszta: Computerized selection of control-sorting equipment, I National Scientific Conference Coordinate measuring technique, Section Fundamentals of Mechanical Engineering Technology Committee and the Committee of Metrology and Scientific Instrumentation PAN, Szczyrk (22-24 April 1996).