Crystallization of Ni-Cr-Si-B and Ni-Cr-Fe-Si-B Amorphous Alloys

Cosmin Codrean; Dragoş Buzdugan; Ramona Lǎzar; Viorel Aurel Şerban; Ion Mitelea

doi:10.4028/www.scientific.net/SSP.216.35

Paper Titles

The Effect of Mo and Al on the Corrosion Behavior of Titanium and Some of its Alloys for Biomedical Applications
p.11

Structural Characteristics of Ductile Iron at Different Rare Earth Contribution from a Magnesium Ferrosilicon Alloy
p.17

Correlation between Microstructure and Magnetic Properties on MnZn Ferrite with Bi₂O₃ Increasing Addition
p.23

Composite Powder and Compacts of Iron/Iron Oxide Type Produced by Mechanosynthesis and Reactive Sintering
p.29

Crystallization of Ni-Cr-Si-B and Ni-Cr-Fe-Si-B Amorphous Alloys
p.35

Implant Surface Finishing Influence on Tissue-Implant Anchoring
p.39

Mechanical Behavior of Fe₆₀Co₁₄Ga₂P₁₀B₅Si₃Al₃C₃Bulk Metallic Glass
p.45

The Influence of Sulphur and Oxigen Additions in Mg-Treated Iron on the Cooling Curves Parameters
p.49

Research on the Influence of Pelleting Mixture Components on Chemical Components and Pellets Structure
p.55

HomeSolid State PhenomenaSolid State Phenomena Vol. 216Crystallization of Ni-Cr-Si-B and Ni-Cr-Fe-Si-B...

Crystallization of Ni-Cr-Si-B and Ni-Cr-Fe-Si-B Amorphous Alloys

Abstract:

Ni based amorphous alloys with Si and B, which can also, contains Fe and Cr, prepared by rapid solidification, have low melting temperatures. This fact increases their susceptibility to be joined by welding and brazing. The glass forming ability (GFA) is conditioned also by the crystallization delay, due to certain chemical composition of the alloys. The thermal stability of these alloys was revealed by DTA analysis and structural characteristics were investigated by XRD. Applying an annealing at temperatures between 420°C and 540°C, with 30 minutes maintaining time, allowed the investigation of phase occurred during the crystallization and the estimation of the crystalline grains dimensions.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 216)

Pages:

35-38

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.216.35

Citation:

Cite this paper

Online since:

August 2014

Authors:

Cosmin Codrean, Dragoş Buzdugan, Ramona Lǎzar*, Viorel Aurel Şerban, Ion Mitelea

Keywords:

Crystallization, DTA Analysis, Ni Based Amorphous Alloys

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] DeCristofaro, N., Bose, D., Brazing and Soldering With Rapidly Solidified Filler Metals, Allied Metals Products Parsippany, NJ 07043, USA.

Google Scholar

[2] Rabinkin, A., Liebermann, H., Brazing Alloys by Rapid Solidification, in Encyclopedia of Materials Science and Engineering, First Supp., R. Cahn, Ed., Pergamon Press, (1989).

Google Scholar

[3] Rabinkin, A., Wenski, E., Ribando, A., Brazing Stainless Steel Using a New MBF-Series of Ni-Cr-B-Si Amorphous Brazing Foils, Welding Journal, Vol. 77, Nr. 2, 1998, pp.66-75.

Google Scholar

[4] Codrean C., Mitelea I., Şerban V.A., Structural Morphology of Transformation by Vacuum Oven Brazed Joints with Amorphous Alloys , Advanced Materials Research, 23, 2007, pp.221-224.

DOI: 10.4028/www.scientific.net/amr.23.221

Google Scholar

[5] Hartmann, T., Nuetzel. D., Nickel-Chromium-Based Amorphous Brazing Foils for Continous furnace Brazing of Stainless Steel, Proceedings of the 9th International Conference of Brazing, High Temperature Brazing and Diffusion Bonding, LÖT 2010, (DVS-Berichte 263), June 15th to 17th 2010, Aachen, Germany, pp.42-47.

DOI: 10.1115/1.4001554

Google Scholar

[6] Zhang, H., Banfield, J.F., Kinetics of Crystallization and Crystal Growth of Nanocrystalline Anatase in Nanometer-Sized Amorphous Titania, Chem. Mater., Vol. 14, No. 10, 2002, pp.4145-4146.

DOI: 10.1021/cm020072k

Google Scholar