Paper Titles

Experimental Investigations on the Formation of Rosettes during Shear
p.199

Fabrication of Metal Laminate Composites with Interface Reinforcement by Semi-Solid Sintering
p.205

Failure Behaviors of 2D-C_f/Mg Composites Fabricated by Liquid-Solid Extrusion Following Vacuum Pressure Infiltration
p.216

Filling, Feeding and Defect Formation of Thick-Walled AlSi7Mg0.3 Semi-Solid Castings
p.222

A Review on Thixoforming of High Melting Point Alloys
p.228

A Novel Method for Semi-Solid Casting of Hypereutectic Gray Cast Iron in Expendable Mold
p.237

The Interface Morphology of Thixo-Joined Dissimilar Steels
p.243

Development of Unconventional Processing of Steels in Semi-Solid State
p.251

Application of Radial Forging and Remelting Treatment to Prepare Semi-Solid Billet of AlMg0.7Si Alloy
p.257

HomeSolid State PhenomenaSolid State Phenomena Vol. 256A Review on Thixoforming of High Melting Point...

A Review on Thixoforming of High Melting Point Alloys

Article Preview

Abstract:

This template explains and demonstrates how to prepare your camera-ready paper for Trans Tech Publications. The best is to read these instructions and follow the outline of this text. Please make the page settings of your word processor to A4 format (21 x 29,7 cm or 8 x 11 inches); with the margins: bottom 1.5 cm (0.59 in) and top 2.5 cm (0.98 in), right/left margins must be 2 cm (0.78 in). We shall be able to publish your paper in electronic form on our web page http://www.scientific.net, if the paper format and the margins are correct. Your manuscript will be reduced by approximately 20% by the publisher. Please keep this in mind when designing your figures and tables etc.

You might also be interested in these eBooks

Semi-Solid Processing of Alloys and Composites XIV

Info:

Periodical:

Solid State Phenomena (Volume 256)

Pages:

228-236

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.256.228

Citation:

Cite this paper

Online since:

September 2016

Authors:

Ahmed Rassili*

Keywords:

High Melting Point Alloy, Steel, Thixoforming

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2016 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] K.P. Young, R.G. Riek, M.C. Flemings, Structure and properties of thixocast steels, Metals Technology (Apr. 1979), pp.130-137.

DOI: 10.1179/030716979803276552

[2] L.E. Boyed, D.H. Kirkwood, C.M. Sellars, In: Proc. 2nd World Basque Congress on New Structural Materials, Spain, 285-95, 1988 (Publ. Vitoria Gasteiz).

[3] D.H. Kirkwood, European patent No. 0305375 Thixotropic materials, (1988).

[4] Leatham, A., Ogilvy, A., Chesney, P., Wood, J.V., Metals and Mater., 5 (1989) 140-3.

[5] S.P. Midson, N.H. Nicholas, R.A. Nichting, K.P. Young, Semi-solid forming high temperature alloys, Proc. of the 2nd Int. Conf. on Semi-Solid Processing of Alloys and Composites, 1992, p.140.

[6] P. Kapranos, D.H. Kirkwood, C.M. Sellars, Proc. Instn. Mech. Engrs. Part B: J. of Engineering Manufacture, 207 (1993) 1-8.

[7] P. Kapranos, R.C. Gibson, D.H. Kirkwood, P.J. Hayes, C.M. Sellars, Mater. Sci. & Technol., 12 (1996) 274-8.

[8] P. Kapranos, D.H. Kirkwood, C.M. Sellars, Semi-solid forging of High Temperature Alloys, Proc. of the 2nd Int. Conf. on Semi-Solid Processing of Alloys and Composites, 1992, p.119.

[9] P. Kapranos, D.H. Kirkwood, C.M. Sellars, Properties of Thixoformed Tools Steels, Proc. of the 3rd Int. Conf. on Semi-Solid Processing of Alloys and Composites, 1994, p.117.

[10] P. Kapranos, D.H. Kirkwood, C.M. Sellars, Semi-solid processing of aluminium and high melting point alloys, Journal of engineering manufacture, 1993, vol. 207, no1, pp.1-8.

DOI: 10.1243/pime_proc_1993_207_055_02

[11] P. Kapranos, D.H. Kirkwood, C.M. Sellars, Thixoforming high melting point alloys into non-metallic dies, Proc. of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, (1996).

[12] P. Kapranos, D.H. Kirkwood, C.M. Sellars, Semi-solid processing of tool steel, Journal de physique IV, supplément au Journal de Physique III, Volume 3, nov. 1993, p.835.

DOI: 10.1051/jp4:19937131

[13] D.H. Kirkwood, Semi-solid processing of high metling point alloys, Proc. of the 4th Int. Conf. on Semi-Solid Processing of Alloys and Composites, (1996).

[14] M.Z. Omar, H.V. Atkinson, P. Kapranos, A.G. Jaharah, Mechanical Properties and Fracture Surfaces of Thixoformed HP9/4/30 steel, Proc. of 10th ESAFORM Conf. on Material forming.

DOI: 10.1063/1.2729675

[15] M.Z. Omar, E.J. Palmiere, A.A. Howe, H.V. Atkinson, P. Kapranos, Thixoforming of a high performance HP9/4/30 steel, Mat. Sci. and Eng. A, 395, Issues 1-2, pp.53-61.

DOI: 10.1016/j.msea.2004.12.013

[16] F. Knauf, G. Hirt, P. Himmich, K. Bobzin, Influence Of Tool Geometry, Tool Coating And Process Parameters In Thixoextrusion Of Steel, Proc. of 10th ESAFORM Conf. on Material forming, Volume 907, pp.1173-1178.

DOI: 10.1063/1.2729673

[17] W. Püttgen, W. Bleck, G. Hirt, H. Shimahara, Thixoforming of Steels - A Status Report, Advanced Engineering Materials 2007, 9, n°4, p.231, 245.

DOI: 10.1002/adem.200700006

[18] W. Püttgen, B. hallstedt, W. Bleck, J.F. Löffler, P.J. Uggowitzer, On the microstructure and properties of 100Cr6 steel processed in the semi-solid state, Acta mat. 55 (2007) 6553-6560.

DOI: 10.1016/j.actamat.2007.08.010

[19] W. Püttgen, B. hallstedt, W. Bleck, P.J. Uggowitzer, On the microstructure formation in chromium steels rapidly cooled from semi-solid state, Acta mat. 55 (2007) 1033-1042.

DOI: 10.1016/j.actamat.2006.09.021

[20] D.I. Uhlenhaut, J. Kradolfer, W. Püttgen, J.F. Löffler, P.J. Uggowitzer, Structure and properties of a hypoeutectic chromium steel processed in the semi-solid state, Acta mat. 54 (2006), n°10, pp.2727-2734.

DOI: 10.1016/j.actamat.2006.02.021

[21] W. Püttgen, W. Bleck, I. Seidl, R. Kopp, C. Bertrand, Thixoforged Damper Brackets made of the Steel Grades HS6-5-3 and 100Cr6, Advanced Engineering Materials 2005, 7, n°8, pp.726-735.

DOI: 10.1002/adem.200500026

[22] E. Lugscheider, T. Hornig, R. Kopp, J. Kallweit, T. Möller, Oxide PVD-Coatings for Use on Dies for Semi-solid Metal (SSM) Forming of Steel, Advanced Eng. Mat. 2001, 3, n°12, pp.998-1001.

DOI: 10.1002/1527-2648(200112)3:12<998::aid-adem998>3.0.co;2-1

[23] H. Shimahara, R. Kopp, Investigations of basic data for the semi-solid forging of steels, Proc. of the 8th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Cyprus, (2003).

[24] M. Modigell, L. Pape, H.R. Maier, Rheology of Semi-Solid Steel Alloys at Temperatures up to 1500°C, Solid state phenomena, 2006, vol. 116-17, pp.606-609.

DOI: 10.4028/www.scientific.net/ssp.116-117.606

[25] P. Cezard, R. Bigot, V. Favier, M. Robelet, Thixoforming of Steel: Experiments on Thermal Effects, Advanced Methods in Material Forming, 2007, pp.309-320.

DOI: 10.1007/3-540-69845-0_19

[26] P. Cezard, R. Bigot, E. Becker, S. Mathieu, J.C. Pierret and A. Rassili, Thixoforming of Steel: New Tools Conception to Analyse Thermal Exchanges and Strain Rate Effects, Proc. of 10th ESAFORM Conf. on Material forming, Volume 907, pp.1155-1160 (2007).

DOI: 10.1063/1.2729670

[27] P. Cezard, R. Bigot, V. Favier, M. Berveiller and M. Robelet, Thixoforming of Steel Experiments on Thermal Effects and Micromechanical Modelling, Proc. of 8th ESAFORM Conf. on Material forming (2005).

DOI: 10.1007/3-540-69845-0_19

[28] P. Cezard, R. Bigot, V. Favier, and M. Robelet, Thixoforming of Steel – Influence of thermal parameters, Solid State Phenomena Vols. 116-117 (2006) pp.721-724.

DOI: 10.4028/www.scientific.net/ssp.116-117.721

[29] E. Becker, R. Bigot, L. Langlois, V. Favier, J.C. Pierret, P. Cezard, Metallurgical and mechanical analysis from thixoforging steel shape, Proc. of 11th ESAFORM Conf. on Material forming (2008).

DOI: 10.1007/s12289-008-0221-y

[30] B. A. Behrens, D. Fischer, B. Haller, A. Rassili, J. C. Pierret, H. Klemm, A. STudinski, B. Walkin, M. Karlsson, M. Robelet, L. Natale, F. Alpini, Series production of thixoformed steel parts, Solid State Phenomena Vols. 116-117 (2006).

DOI: 10.4028/www.scientific.net/ssp.116-117.686

[31] M. Robelet, A. Rassili, D. Fischer, Steel grades adapted to the thixoforging process: metallurgical structures and mechanical properties, Solid State Phenomena, 2006, vol. 116-17, pp.712-716.

DOI: 10.4028/www.scientific.net/ssp.116-117.712

[32] A. Rassili, M. Robelet, D. Fischer, Thixoforming of carbon steels: inductive heating and process control, Solid state phenomena, 2006, vol. 116-17, pp.717-720.

DOI: 10.4028/www.scientific.net/ssp.116-117.717

[33] A. Rassili, M. Robelet, R. Bigot, D. Fischer, Thixoforming of Steels and Industrial Applications, Proc. of 10th ESAFORM Conf. on Material forming (2007).

[34] J. Lecomte-Beckers, A. Rassili, M. Carton, M. Robelet, Characterisation of thermophysical properties of semi-solid steels for thixoforming , Proc. of the 8th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Cyprus, (2004).

DOI: 10.1007/3-540-69845-0_20

[35] M. Robelet, J. Demurger, A. Rassili, D. Fischer, H. Klemm, B. Walkin, M. Karlsson, A. Cucatto, Determination of the semi-solid behavior of steels, Proc. of the 8th Int. Conf. on Semi-Solid Processing of Alloys and Composites, Cyprus, (2004).

[36] M. Z. Omar, H. V. Atkinson, E. J. Palmiere, A. A. Howe, P. Kapranos, Viscosity – Shear rate relationship during the thixoforming of HP9/4/30 steel, Solid state phenomena, 2006, vol. 116-17, pp.677-680.

DOI: 10.4028/www.scientific.net/ssp.116-117.677

[37] J. Li, S. Sugiyama, J. Yanagimoto, Microstructural evolution and deformation behavior of stainless steel in semi-solid state, Solid state phenomena, 2006, vol. 116-17, pp.681-685.

DOI: 10.4028/www.scientific.net/ssp.116-117.681

[38] G. Hirt, W. Bleck, A. Bührig-Polaczek, H. Shimahara, W. Püttgen, C. Afrath, Semi Solid Casting and Forging of Steel, Solid state phenomena , 2006, vol. 116-17, pp.34-43.

DOI: 10.4028/www.scientific.net/ssp.116-117.34

[39] P. Cezard, T. Sourmail, Thixoforming of Steel: a state of the art from an industrial point of view, Solid State Phenomena Vols. 141-143 (2008) pp.25-35.

DOI: 10.4028/www.scientific.net/ssp.141-143.25

[40] A. Rassili, H.V. Atkinson, A review on steel thixoforming, Trans. Nonferrous Met. Soc. China 20(2010) pp s1048-s1054.

DOI: 10.1016/s1003-6326(10)60629-2

[41] A. Rassili, H.V. Atkinson (Eds. ), Thixoforming steel, Shaker-Verlag, Aachen, (2010).

[42] S.J. Luo, W.C. Keung, Y.L. Kang, Theory and application research development of semi-solid forming in China, Trans. Nonferrous Met. Soc. China 20(2010) pp.1805-1814.

DOI: 10.1016/s1003-6326(09)60378-2

[43] G. Walmag, P. Naveau, A. Rassili, M. Sinnaeve, A new processing route for as-cast thixotropic steel, Solid state phenomena, 2008, vol. 141-143, pp.415-420.

DOI: 10.4028/www.scientific.net/ssp.141-143.415

[44] R.B. Song, Y.L. Kang, A.M. Zhao, Semi solid rolling process of steel strips, Journal of Materials Processing Technology (2008), vol 198, pp.291-299.

DOI: 10.1016/j.jmatprotec.2007.06.079

[45] B. Amin-Ahmadi, H. Aashuri, Semi solid structure for M2 high speed steel prepared by cooling slope, Journal of Materials Processing Technology (2010), vol 210, pp.1632-1635.

DOI: 10.1016/j.jmatprotec.2010.05.011

[46] B. Heidarian, M. Nlili-Ahmadabadi, M. Moradi, Mechanical properties of thixo-formed austempered ductile iron, Trans. Nonferrous Met. Soc. China 20(2010) pp s798-s804.

DOI: 10.1016/s1003-6326(10)60584-5

[47] B. Amin-Ahmadi, H. Aashuri, Investigations on the suitability of some ferrous alloys for semi-solid processing, Journal of Achievements in Materials and Manufacturing Engineering (2009), vol 34, pp.188-195.

[48] L. Rogal, J. Dutkiewicz, Effect of annealing on microstructure, phase composition and mechanical properties of thixo-cast 100Cr6 steel, Materials Characterisation (2012), vol §8, pp.123-130.

DOI: 10.1016/j.matchar.2012.03.018

[49] L. Rogal, J. Dutkiewicz, Globular microstructure fomration in X210CrW12 steel for semi-solid processing using plastic deformation or boron modification, Archives of Metallurgy and Materials (2013), vol 58, pp.751-755.

DOI: 10.2478/amm-2013-0066

[50] F. H. Yekta, S.A. Sadough, V. Pouyafar, A. Jabbari, The rheological behavior of HS6-5-2 tool steel for non-isothermal processing, Solid State Phenomena, 2013, vol. 192-193, pp.317-322.

DOI: 10.4028/www.scientific.net/ssp.192-193.317

[51] Z. Cuiqing, S. Renbo, Evolution of microstructure and mechanical properties for 9Cr18 stainless steel during thixoforming, Materials and Design 2014, vol. 59, p.502–508.

DOI: 10.1016/j.matdes.2014.03.017

[52] F. H. Yekta, S.A. Sadough, V. Pouyafar, A. Jabbari, The rheological behavior of HS6-5-2 tool steel for non-isothermal processing, Solid State Phenomena, 2013, vol. 192-193, pp.317-322.

DOI: 10.4028/www.scientific.net/ssp.192-193.317

[53] M. Toofaninejad, M. Nili-Ahmadabadi, H. Shirazi, Microstructural Evolution of Semi-Solid Type 304 Stainless Steel Deformed Severely by ECAP, Solid State Phenomena 2015, vols. 217-218, pp.99-104.

DOI: 10.4028/www.scientific.net/ssp.217-218.99

[54] M. Bunck, E. Subasic, A. Buhrig-Polaczek, K. Jiang, S. Munstermann, J.M. Schneider, K. Fickert, H.J. Gunther, Thixocasting combination spanners using stainless steel X39CrMo17, Trans. Nonferrous Met. Soc. China 20 (2010) pp s998-s1004.

DOI: 10.1016/s1003-6326(10)60620-6

[55] Y. Ming, S. Sugiyama, J. Yangimoto, Microstructural evolution during RAP process and deformation behavior of semi-solid SKD61 tool steel, Journal of Materials Processing Technology 212 (2012) pp.1731-1741.

DOI: 10.1016/j.jmatprotec.2012.04.003

[56] Y. Ming, S. Sugiyama, M. Soltanpour, J. Yangimoto, Effects of predeformation and semi-solid processing on microstructure and mechanical properties of Cr–V–Mo steel, Journal of Materials Processing Technology 213 (2013) pp.426-433.

DOI: 10.1016/j.jmatprotec.2012.09.021

[57] M.Z. Omar, A. Alfan, J. Syarif, H.V. Atkinson, Micorstructural investigations of XW-42 and M2 tool steels in semi-solid zones via direct partial remelting route, Journal of Materials Science 46 (2011) pp.7966-7705.

DOI: 10.1007/s10853-011-5749-4

[58] J. Dutkiewicz, J. Glownia, L. Rogal, Preparation of globular microstructure in H18 steel for semi solid processing with the use of Boron addition, Solid State Phenomena, 2014, vol. 217-218, pp.8-14.

DOI: 10.4028/www.scientific.net/ssp.217-218.8

[59] J.C. Pierret, A. Rassili, G. Vaneetveld, J. Lecomte-Beckers, R. Bigot, Robustness of a thixoforming line, Solid State Phenomena, 2008, vol. 141-143, pp.207-212.

DOI: 10.4028/www.scientific.net/ssp.141-143.207

[60] G.C. Gu, R. Pesci, L. Langlois, E. Becker, R. Bigot, M.X. Guo, Microstructure observation and quantification of the liquid fraction of M2 steel grade in the semi-solid state, combining confocal laser scanning microscopy and X-Ray microtomography, Acta. Mater., 2014, vol. 66, pp.118-131.

DOI: 10.1016/j.actamat.2013.11.075

[61] H.V. Atkinson, Modelling the semisolid processing of metallic alloys, Progress in Materials Science, 2005, vol. 50, p.341–412.

DOI: 10.1016/j.pmatsci.2004.04.003

[62] H.V. Atkinson (Ed. ), Modelling of Semi-Solid Processing, Shaker-Verlag, Aachen, (2008).

[63] G. Hirt, R. Kopp, (Eds. ), Thixoforming: Semi Solid Processing, Willey-VCH Verlag, Weinheim, (2009).

[64] K.P. Solek, A. Rassili, J.C. Pierret, G. Vaneetveld, Characterisation of thixoforming process of 100Cr6, Trans. Nonferrous Met. Soc. China 20(2010) pp s916-s920.

DOI: 10.1016/s1003-6326(10)60606-1

[65] M. Modigell, T. Volkmann, C. Zang, A high-precision rotational rheometer for temperature up to 1700 °C, Solid State Phenomena, 2013, vol. 192-193, pp.359-364.

DOI: 10.4028/www.scientific.net/ssp.192-193.359

[66] D.M. Benati, L.V. Torres, E.J. Zoqui, Rheological behavior of semisolid hypoeutectic cast iron alloyed to Chromium, Solid State Phenomena, 2015, vol. 217-218, pp.138-143.

DOI: 10.4028/www.scientific.net/ssp.217-218.138

[67] F. Hosseini Yekta, S.A. Sadough, V. Pouyafar, A. Jabbari, Flow behaviour of M2 steel alloy during semi solid isothermal rapid compression, Solid State Phenomena, 2013, vol. 192-193, pp.311-316.

DOI: 10.4028/www.scientific.net/ssp.192-193.311

[68] V.L. Dao, S.D. Zhao, Q. Zhang, Numerical simulation of a thixocasting process for AISI420 stainless steel air-turbine blade, Trans. Nonferrous Met. Soc. China 20(2010) pp s926-s930.

DOI: 10.1016/s1003-6326(10)60608-5

[69] J.C. Pierret, A. Rassili, G. Vaneetveld, J. Lecomte-Beckers, Stability of steel thixoforming process, Trans. Nonferrous Met. Soc. China 20(2010) pp s937-s942.

DOI: 10.1016/s1003-6326(10)60610-3

[70] L. Khizhnyakova, M. Ewering, G. Hirt, K. Bobzin, N. Bagcivan, Metal flow and die wear in semi-solid forging of steel using coated dies, Trans. Nonferrous Met. Soc. China 20(2010) pp s954-s960.

DOI: 10.1016/s1003-6326(10)60613-9

[71] V. Poyafar, S.A. Sadough, F. Hosseini, A. Jabbari, High temperature flow material behaviour of semi-solid steel alloys, Solid State Phenomena, 2013, vol. 192-193, pp.365-369.

DOI: 10.4028/www.scientific.net/ssp.192-193.365

[72] E. Becker, L. Langlois, V. Favier, R. Bigot, Thermomechanical modelling and simulation of C38 thixoextrusion steel, Solid State Phenomena, 2015, vol. 217-218, pp.130-137.

DOI: 10.4028/www.scientific.net/ssp.217-218.130

[73] V. Favier, E. Becker, R. Bigot, Investigation of parameters promoting hot cracking during semi-solid forming processes, Solid State Phenomena, 2015, vol. 217-218, pp.281-285.

DOI: 10.4028/www.scientific.net/ssp.217-218.281

[74] I. Peter, M. Rosso, From hot forging to thixoforging: FEM analysis of thixoforging process for steering piston production, Solid State Phenomena, 2015, vol. 217-218, pp.366-373.

DOI: 10.4028/www.scientific.net/ssp.217-218.366

[75] Y. Birol, Inconel 617 and Stellite 6 alloys for tooling in tixoforming of steels, Trans. Nonferrous Met. Soc. China 20(2010) pp.1656-1662.

DOI: 10.1016/s1003-6326(09)60354-x

[76] A. Rassili, J. Lecomte-Beckers, Tooling materials and solutions for thixoforming steel: a key to the process industrialisation, Solid State Phenomena, 2015, vol. 217-218, pp.374-380.

DOI: 10.4028/www.scientific.net/ssp.217-218.374

[77] B. Masek, D. Aisman, M. Behulova, M. Jirkova, Structure of miniature components from steel produced in semi-solid state, Trans. Nonferrous Met. Soc. China 20(2010) pp s1037-s1041.

DOI: 10.1016/s1003-6326(10)60627-9

[78] L. Rogal, J. Dutkiewicz, T. Czeppe, J. Bonarski, B. Olszowska-Sobeiraj, Characteristics of 100Cr6 bearing steel after thixoforming process performed with prototype device, Trans. Nonferrous Met. Soc. China 20(2010) pp s1033-s1036s.

DOI: 10.1016/s1003-6326(10)60626-7

[79] R. Bigot, E. Bigot, L. Langlois, Some approaches on industrialization of steel thixoforging processes, Solid State Phenomena, 2013, vol. 192-193, pp.311-316.

DOI: 10.4028/www.scientific.net/ssp.192-193.521

[80] A. Rassili, Internal report, (2014).