Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding

A.V. Shaparev; I.A. Savin

doi:10.4028/www.scientific.net/SSP.284.319

Paper Titles

Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet
p.295

Influence of Electrode Gap’s Value in Electron Gun on the Penetrating Ability of Electron Beam during the Implementation of Additive Processes
p.300

Influence of Technological Parameters of Direct Laser Deposition Process on the Structure and Properties of Deposited Products from Alloy Ti-6Al-4V
p.306

Influence of the Roughness on the Mechanical Properties of Ti-6Al-4V Products Prepared by Direct Laser Deposition Technology
p.312

Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding
p.319

Research of the Mechanism of Destruction of Compression Molds for Casting under Pressure of Color Alloys
p.326

Investigation of Grey Cast Iron Microstructure Influence on its Heat Resistance
p.332

Methodology of High-Carbon Wire Rod Perlite Grain Grade Identification
p.338

Laser Welded Joints of High-Nitrogen Austenitic Steels: Microstructure and Properties
p.344

HomeSolid State PhenomenaSolid State Phenomena Vol. 284Influence of the State of the Contact Surfaces on...

Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding

Abstract:

Joint plastic deformation of the components of bimetal 1 according to OST 3-6648-91 brass L90-steel 18JUA-brass L90 should be produced with the greatest possible compression to obtain the necessary strength of the joining of the layers, ensuring the strip looking into a roll without stratification. Preparation of contact surfaces before cold cladding is one of the most important technological operations. The influence of such factors on the strength of the bonding of bimetal layers as the surface hardening of contact surfaces, the microgeometry of contact surfaces, the temperature of diffusion annealing after cladding, the influence of the ratio of the thicknesses of bimetal layers was investigated. Technological recommendations for the production of bimetal 1 on OST 3-6648-91 brass L90-steel 18JUA-brass L90 by the method of cold cladding are developed.

You might also be interested in these eBooks

Materials Engineering and Technologies for Production and Processing IV

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 284)

Pages:

319-325

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.284.319

Citation:

Cite this paper

Online since:

October 2018

Authors:

A.V. Shaparev*, I.A. Savin

Keywords:

Bimetal, Cold Cladding, Compound of Metals, Contact Surfaces, Degree of Deformation

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] A.V. Shaparev, I.A. Savin, Calculation of Joint Plastic Deformation to Form Metal Compound in Cold Condition, Solid State Phenomena, 265 (2017) 313-318.

DOI: 10.4028/www.scientific.net/ssp.265.313

Google Scholar

[2] R.V. Gavariev , I.A. Savin, Improvement of Surface Quality of Casting Produced by Casting under Pressure, Solid State Phenomena, 265 (2017) 988-993.

DOI: 10.4028/www.scientific.net/ssp.265.988

Google Scholar

[3] R.V. Gavariev, I.A. Savin, I.O. Leushin, Increasing the quality of the surface of zinc castings by applying multi-layer protective coatings, Tsvetnye Metally 5 (2017) 84-88.

DOI: 10.17580/tsm.2017.05.13

Google Scholar

[4] R.V. Gavariev, I.A. Savin, I.O. Leushin, Impact of the functional coating on service durability of injection molds for the zinc alloys pressure casting, Tsvetnye Metally, 1 (2016).

DOI: 10.17580/tsm.2016.01.11

Google Scholar

[5] A. Shaparev, I. Savin, Calculation of the Amount of the Reduction Required for the Formation of Compound Layers during Cold Rolling of Bimetals, Materials Science Forum, 870 (2016) 328-333.

DOI: 10.4028/www.scientific.net/msf.870.328

Google Scholar