Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet

A.M. Stolyarov; Marina V. Potapova; Michail G. Potapov

doi:10.4028/www.scientific.net/SSP.284.295

Paper Titles

Features of the Structure Formation at Laser and Laser-Arc Deposition from Aluminum Wire
p.270

Geometrical Errors of Surfaces Milled with Convex and Concave Profile Tools
p.281

Heat Treatment Regimes Influence on Mechanical Properties of Forging Products of α+β- and Pseudo- β-Titanium Alloys
p.289

Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet
p.295

Influence of Electrode Gap’s Value in Electron Gun on the Penetrating Ability of Electron Beam during the Implementation of Additive Processes
p.300

Influence of Technological Parameters of Direct Laser Deposition Process on the Structure and Properties of Deposited Products from Alloy Ti-6Al-4V
p.306

Influence of the Roughness on the Mechanical Properties of Ti-6Al-4V Products Prepared by Direct Laser Deposition Technology
p.312

Influence of the State of the Contact Surfaces on the Formation of the Joint of Steel and Brass during Cold Cladding
p.319

HomeSolid State PhenomenaSolid State Phenomena Vol. 284Influence of Different Factors on Withdrawal Speed...

Influence of Different Factors on Withdrawal Speed of Continuous Cast Billet

Abstract:

The influence of the St.3sp, 40 and 85 steel grades chemical composition, temperature of the metal in the tundish ladle, billet cross-sectional dimensions (150 × 150 and 152 × 170 mm), the sulfur content in the metal on the speed of withdrawal of the billets from the CCM mold has been investigated. It was established, that the change of the metal temperature in the tundish ladle of the CCM has the greatest effect on the billet withdrawal speed, the change of carbon content in the steel and the billet cross-sectional dimensions influence in less extend, and the sulfur content in the cast steel does not affect at all.

You might also be interested in these eBooks

Materials Engineering and Technologies for Production and Processing IV

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 284)

Pages:

295-299

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.284.295

Citation:

Cite this paper

Online since:

October 2018

Authors:

A.M. Stolyarov, Marina V. Potapova*, Michail G. Potapov

Keywords:

Billet, CCM, Continuous Casting, Speed of Withdrawal, Technology Parameters

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] A.M. Stolyarov, A.B. Veliky, D.V. Yurechko, Increasing the efficiency of steel casting on high-performance CCM, Monograph. Magnitogorsk, (2009).

Google Scholar

[2] V.A. Bigeyev, A.M. Stolyarov, A.Kh. Valiakhmetov, Metallurgical technologies in a high-performance EAF, Training. Magnitogorsk, (2014).

Google Scholar

[3] A.M. Stolyarov, V.N. Selivanov, Continuous casting of steel. Continuous casting machines: Pract. Magnitogorsk, (2017).

Google Scholar

[4] A.M. Stolyarov, V.N. Selivanov, Technology of continuous casting of steel: Training. Magnitogorsk, (2009).

Google Scholar

[5] S.A. Botnikov, A modern atlas of defects of a continuous cast billet and the causes of breakthroughs of a crystallizing metal crust. Volgograd, (2011).

Google Scholar

[6] A.M. Stolyarov, M.V. Potapova, Somnath Basu, About methods of influence on the process of formation of conticast steel billet, Vestnik of Nosov Magnitogorsk State Technical University. 1(45) (2014) 24-27.

Google Scholar