Paper Titles

Studies of Kinetic Plasticity Effect in High-Speed Steels under Martensite Transformation
p.8

Theoretical and Technological Basics of the Friction Units’ Resource Increasing
p.15

Simulation of the Carbon Diffusion Saturation Gear from 15Cr2 Steel in the Cementation Process
p.24

Effect of Protective Coatings in Welded Constructions on Welding Stability and Electrode Metal Transfer into a Weld Pool in MMA
p.32

Electric Arc Deposition of an Anticorrosive Layer with Two Strip Electrodes
p.39

Pore Formation during Laser Welding in Different Spatial Positions
p.47

SEM Studies on the Microstructure and Phase Composition Distribution in Cr₃C₂ + TiC Claddings on Low-Carbon Steel
p.59

Analysis of Thermal Processes during Friction Stir Welding of Metals
p.67

Preparation a Scrap of the Electronic Enterprises and its Subsequent Processing
p.79

HomeSolid State PhenomenaSolid State Phenomena Vol. 303Electric Arc Deposition of an Anticorrosive Layer...

Electric Arc Deposition of an Anticorrosive Layer with Two Strip Electrodes

Article Preview

Abstract:

A two-strip electrodes surfacing with controlled transfer of electrode metal is proposed for applying an anti-corrosion layer to the surface of the base metal with a variable angle to the horizon. To prevent the formation of defects in the formation of the deposited layer, it is proposed to adjust the parameters of the surfacing mode in places where the angle of inclination of the surface changes.

You might also be interested in these eBooks

Materials and Processing Technology III

Info:

Periodical:

Solid State Phenomena (Volume 303)

Pages:

39-46

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.303.39

Citation:

Cite this paper

Online since:

May 2020

Authors:

Vitaliy Ivanov*, Nataliia A. Makarenko, Elena Lavrova, Marina V. Ahieieva

Keywords:

Controlled Mechanical Transfer, Crystallization Cracks, Penetration Zone, Slag Pool, Two-Strip Deposition

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2020 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

* - Corresponding Author

[1] Ilyaschenko, D.P., Chinakhov, D.A. Investigating the influence of the power supply type upon the weld joints properties and health characteristics of the manual arc welding (2012) Materials Science Forum, 704-705, pp.608-611.

DOI: 10.4028/www.scientific.net/msf.704-705.608

[2] Il'Yaschenko, D.P., Chinakhov, D.A., Gotovschik, Y.M. Investigating the influence of the power supply type upon the properties of the weld joints under manual arc welding (2014) Advanced Materials Research, 1040, pp.837-844.

DOI: 10.4028/www.scientific.net/amr.1040.837

[3] Il'yaschenko, D.P., Chinakhov, D.A., Makarov, S.V., Danilov, V.I., Galinsky, A.A. and Verkhoturov, E.V. Effect of ultra-disperse powder in electrode coating on properties of welds in MMA welding. Engineering Solid Mechanics 8 (2020). doi: 10.5267 /j.esm.2019.8.006.

DOI: 10.5267/j.esm.2019.8.006

[4] Razmyshlyaev, A.D., Mironova, M.V., Yarmonov, S.V. and Vydmysh, P.A. The speed of flows in the pool in arc welding in a transverse magnetic field (2015) Welding International, 29(4), рр. 296-300.

DOI: 10.1080/09507116.2014.921376

[5] Gulakov, S.V., Chigarev, V.V., Ivanov, V.P., Psareva, I.S., and Lavrentik, O.A. Improvement of technology for hardfacing of metallurgical equipment components (2004) Paton Welding Journal, 10, pp.54-57.

[6] Solidor, N. A., Ivanov, V.P., Morgay, F.V. and Nosovsky, B.I. Investigation of corrosion resistance welds metal hose made of steels AISI 304 and AISI 316 (2015) Eastern-European Journal of Enterprise Technologies, 4/5(76), p.33–39.

DOI: 10.15587/1729-4061.2015.47035

[7] Lavrova, E.V., Ivanov, V.P. Controlling the Depth of Penetration in the Case of Surfacing with a Strip Electrode at an Angle to the Generatrix (2018) Materials Science Forum, 938, рр. 27-32.

DOI: 10.4028/www.scientific.net/msf.938.27

[8] Ivanov, V.P., Lavrova, E.V. Development of the Device for Two-Strip Cladding with Controlled Mechanical Transfer (2018) IOP Conf. Series: Journal of Physics, 1059, 012020.

DOI: 10.1088/1742-6596/1059/1/012020

[9] Ivanov, V.P., Lavrova, E.V. Improving the Efficiency of Strip Cladding by the Control of Electrode Metal Transfer (2014) Applied Mechanics and Materials, 682, pp.266-269. doi:10.4028/ www.scientific.net/AMM.682.266.

DOI: 10.4028/www.scientific.net/amm.682.266

[10] Leshchinskiy L. K., Lavrik V. P., Kasatkin O. G. Vliyanie tekhnologicheskih faktorov na kachestvo antikorrozionnogo sloya, naplavlennogo dvumya elektrodnymi lentami // Avtomaticheskaya svarka. 1986. Issue 8. P. 49–53.

[11] Dragan S. V. Influence of high-frequency oscillations of the electrode on the geometry of weld penetration for automatic surfacing under flux/ S.V. Dragan, I.V. Simutenkov, Y.A. Yaros, V.Y. Trembich // Shipbuilding and marine infrastructure. – 2015.– Issue 1. – p.76–86.

DOI: 10.15589/smi20150101

[12] EP2709787A2. Tennyson, H. System and method for high-speed cladding of metals.

[13] CRA Weld Overlay – Influence of welding process and parameters on dilution and corrosion resistance / Kumar V., Lee C., Verhaeghe G., Raghunathan S. Houston: Stainless Steel World America, Texas, 2010. P. 64–71.

[14] Nikhil V., Farkade P., Ravanan M. Modification In Weld Overlay for Productivity and Corrosion Resistance (2015) IJSTE - International Journal of Science Technology & Engineering, 2(2), 2349-784X.

[15] Thakare, N., Niraj, S., Ram Yada, V. Electro Slag Strip Cladding Process // International Journal of Modern Engineering Research (IJMER). 2014. Vol. 4, Issue 7. P. 60–64.

[16] Dave, S. N., Narkhede, B. E. Study of the electro slag strip cladding process & effect of its parameters on welding // International Journal of Advance Engineering and Research Development. 2016. Vol. 3, Issue 12. P. 101–108. doi: https://doi.org/10.21090/ijaerd.031220.

DOI: 10.21090/ijaerd.031220

[17] Kolařík, L., Kolaříková, M., Janovec, J. Electroslag cladding of stainless austenitic layer by strip electrode. Conference Paper, (May 2016)Conference: METAL, (2016) - 25th Anniversary International Conference on Metallurgy and Materials, At Brno, Czech Republic, May 25th - 27th 2016, Brno, Czech Republic, EU.

DOI: 10.5176/2251-189x_sees16.46