Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water

Koshiro Mizobe; Takahiro Matsueda; Gakuto Shinohara; Takuya Shibukawa; Katsuyuki Kida

doi:10.4028/www.scientific.net/SSP.315.72

Paper Titles

A Calculation Method for the Coupling of Temperature and Concentration during Inconel 718 Alloy Solidification
p.50

The Influences of Third Alloying Element on the Internal Friction Behavior and the Mechanical Properties in the Water Quenched Ti-12Mo Alloys
p.56

The Phase Constitutes of Ti-Mo-Based Alloys
p.61

Image Evaluation of Distribution of Carbide Particles in Repeatedly Quenched (Two and Three Times) JIS-SUJ2 Steels
p.66

Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water
p.72

Examination of Dynamic Strain Ageing Effects during Rapid Quenching of Inconel 718 Superalloy Disc
p.77

Length-Scale-Dependent Micromechanical Modeling for Precipitate Hardening in Inconel 718 Superalloy
p.84

Arrangement Optimization and Crashworthiness Analysis of B-Pilla Solder Joint Based on Collision Safety
p.90

Detection of Hydrogen Damage in 2.25Cr1Mo0.25V by Ultrasonic Inspection
p.96

HomeSolid State PhenomenaSolid State Phenomena Vol. 315Surface Observation of Induction-Heated...

Surface Observation of Induction-Heated 13Cr-2Ni-2Mo Stainless Steel after Interrupted Fatigue Testing under Rolling Contact Stress in Water

Abstract:

In order to investigate the wear behavior of induction-heated 13Cr-2Ni-2Mo stainless steel, we performed the rolling contact fatigue (RCF) tests in water. We interrupted the RCF test at each 1.0×10⁵ cycles and measure the wear loss and observed the contact surface. After the RCF tests, we found the oxygen concentration area in the contact area.

You might also be interested in these eBooks

Metallurgy Technology and Materials VIII

View Preview

Info:

Periodical:

Solid State Phenomena (Volume 315)

Pages:

72-76

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.315.72

Citation:

Cite this paper

Online since:

March 2021

Authors:

Koshiro Mizobe*, Takahiro Matsueda, Gakuto Shinohara, Takuya Shibukawa, Katsuyuki Kida

Keywords:

Bearings, Corrosion, Rolling Contact Fatigue, Stainless Steel

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

Citation:

* - Corresponding Author

References

[1] N. R. Baddoo, Stainless steel in construction: A review of research, applications, challenges and opportunities, Journal of Constructional steel research, Vol. 64, Issure 11, (2008), pp.1199-1206.

DOI: 10.1016/j.jcsr.2008.07.011

Google Scholar

[2] R. Tanaka eds., How to use for stainless steel, Nihon Kikakkuka Kyokai, Japan, (1994).

Google Scholar

[3] K. Takano, W. Murata, K. Yoshimura, M. Sakakibara and T. Matsui, Development of high-strength martensitic stainless steel YUS 550 for architectural use, Nippon Steel Technical Report, Vol. 71, (1996), pp.53-63.

Google Scholar

[4] T. Honda, E. C. Santos, K. Kida, and T. Shibukawa, Changes in the microstructure of 13Cr-2Ni-2Mo stainless steels through the quenching process by induction heating, International journal of materials and product technology, Vol. 45, No 1/2/3/4, (2012), pp.31-40.

DOI: 10.1504/ijmpt.2012.051329

Google Scholar

[5] K. Kida, K. Okamoto, M. Ishida, K. Mizobe and T. Shibukawa, Observation of Corrosion Resistance of 13Cr-2Ni-2Mo Stainless Steel Quenched by Induction Heating, Applied Mechanics and Materials, Vol. 597, (2014), pp.140-143.

DOI: 10.4028/www.scientific.net/amm.597.140

Google Scholar

[6] K. Mizobe, K. Okamoto, K. Kanemasu, T. Shibukawa and K. Kida, Observation of rolling contact fatigue of induction heated 13Cr–2Ni–2Mo stainless steel under reciprocating motion, Material research innovations, Vol. 18, Issure S5, (2014), pp.52-56.

DOI: 10.1179/1432891714z.000000000907

Google Scholar