Characterizing the Effect of Processing Parameters on Temperature Distribution of 7075 Aluminum Alloy Slurry Prepared by Enthalpy Control Process

Abstract:

There is a strong demand for high-strength aluminum alloys such as 7075 aluminum alloy to be applied for rheocasting industry. The overriding challenge for the application of 7075 alloy is that its solid fraction is very sensitive to the variation of temperature in the range of 40% ~ 50% solid fraction, which inevitably narrows down the processing window of slurry preparation for rheocasting process. Therefore, in this work, a novel method to prepare semi-solid slurry of the 7075 alloy, so called Enthalpy Control Process (ECP), has been developed to grapple with this issue. In the method, a medium-frequency electromagnetic field was applied on the outside of slurry preparation crucible to reduce the temperature difference throughout the slurry. The effect of processing parameters, including heating power, heating time, the initial temperature of crucible and melt weight, on the temperature field of the semi-solid slurry was investigated. The results exhibited that although the all the processing parameters had a great influence on the average temperature of the slurry, heating time was the main factor affecting the maximum temperature difference of the slurry. The optimum processing parameters during ECP were found to be heating power of 7.5 KW, the initial temperature of crucible of 30 °C ~ 200 °C and melt weight of 2 kg.

• Periodical: Solid State Phenomena (Volume 327)
• Pages: 263-271
• DOI: https://doi.org/10.4028/www.scientific.net/SSP.327.263
• Online since: January 2022
• Authors: Gan Li*, Jin Kang Peng, En Jie Dong, Juan Chen, Hong Xing Lu, Qiang Zhu
• Keywords: 7075 Aluminum Alloy, Enthalpy Compensation Process, Processing Parameters, Slurry Preparation, Temperature Difference

References

[1] A.E.W. Jarfors, J.C. Zheng, L. Chen, J. Yang, Recent Advances in Commercial Application of the Rheometal Process in China and Europe, Solid State Phenomena 285 2019 405-410.

DOI: 10.4028/www.scientific.net/ssp.285.405

[2] P. Kapranos, Current State of Semi-Solid Net-Shape Die Casting, Metals 9(12) 2019 1301.

DOI: 10.3390/met9121301

[3] A.E.W. Jarfors, A Comparison Between Semisolid Casting Methods for Aluminium Alloys, Metals 10(10) 2020 1368.

DOI: 10.3390/met10101368

[4] Q. Zhu, S.P. Midson, Semi-solid moulding: Competition to cast and machine from forging in making automotive complex components, Transactions of Nonferrous Metals Society of China 20(Supplement 3) 2010 1042-1047.

DOI: 10.1016/s1003-6326(10)60628-0

[5] M. Qi, Y. Xu, J. Li, Y. Kang, Z. Wulabieke, Microstructure refinement and corrosion resistance improvement mechanisms of a novel Al-Si-Fe-Mg-Cu-Zn alloy prepared by ultrasonic vibration-assisted rheological die-casting process, Corrosion Science 180 2021 109180.

DOI: 10.1016/j.corsci.2020.109180

[6] M. Qi, Y. Kang, Y. Xu, Z. Wulabieke, J. Li, A novel rheological high pressure die-casting process for preparing large thin-walled Al–Si–Fe–Mg–Sr alloy with high heat conductivity, high plasticity and medium strength, Materials Science and Engineering: A 776 2020 139040.

DOI: 10.1016/j.msea.2020.139040

[7] J. Wannasin, R.A. Martinez, M.C. Flemings, Grain refinement of an aluminum alloy by introducing gas bubbles during solidification, Scripta Materialia 55(2) 2006 115-118.

DOI: 10.1016/j.scriptamat.2006.04.003

[8] M. Luo, D. Li, S.P. Midson, W. Qu, Q. Zhu, J. Fan, Model for Predicting Radial Temperature Distribution of Semi-Solid Slug Produced by Swirled Enthalpy Equilibration Device (SEED) Process, Journal of Materials Processing Technology 273 2019 116236.

DOI: 10.1016/j.jmatprotec.2019.05.017

[9] M. Luo, D. Li, W. Qu, X. Hu, Q. Zhu, J. Fan, Mold–Slug Interfacial Heat Transfer Characteristics of Different Coating Thicknesses: Effects on Slug Temperature and Microstructure in Swirled Enthalpy Equilibration Device Process, Materials 12(11) 2019 1836.

DOI: 10.3390/ma12111836

[10] G. Li, H. Lu, X. Hu, F. Lin, X. Li, Q. Zhu, Current Progress in Rheoforming of Wrought Aluminum Alloys: A Review, Metals 10(2) 2020 238.

DOI: 10.3390/met10020238

[11] G. Li, H. Lu, M. Luo, W. Qu, X. Hu, Q. Zhu, Research Progress in Semi-solid Rheoforming of Aluminium Alloys, Journal of Netshape Forming Engineering 12(3) 2020 29-48.

[12] H.V. Atkinson, Alloys for semi-solid processing, Solid State Phenomena 192 2013 16-27.

[13] W. Sun, Y. Zhu, R. Marceau, L. Wang, Q. Zhang, X. Gao, C. Hutchinson, Precipitation strengthening of aluminum alloys by room-temperature cyclic plasticity, Science 363(6430) 2019 972.

DOI: 10.1126/science.aav7086

[14] J.H. Martin, B.D. Yahata, J.M. Hundley, J.A. Mayer, T.A. Schaedler, T.M. Pollock, 3D printing of high-strength aluminium alloys, Nature 549(7672) 2017 365.

DOI: 10.1038/nature23894

[15] X.G. Hu, Q. Zhu, S.P. Midson, H.V. Atkinson, H.B. Dong, F. Zhang, Y.L. Kang, Blistering in semi-solid die casting of aluminium alloys and its avoidance, Acta Materialia 124 2017 446-455.

DOI: 10.1016/j.actamat.2016.11.032

[16] G. Li, H.X. Lu, X.G. Hu, Q. Zhu, Numerical Simulation of Slurry Making Process of 7075 Aluminum Alloy under Electromagnetic Field in Rheocasting Process, Solid State Phenomena 285 2019 373-379.

DOI: 10.4028/www.scientific.net/ssp.285.373