Strength and Crack Resistance Structural Criteria of Composite Coatings Produced by the Method of Multi-Chamber Detonation Spraying

Abstract:

The essential task of modern industry is to increase the reliability and durability of products. One of the promising ways to increase the products operational durability is the ceramics and cermets powders functional coatings application to the working surfaces by the method of high-speed multi-chamber detonation spraying. The objective of the given paper is to determine the regularities of the influence of structural-phase features in the formed material of functional cermets coatings of metal parts on their strength characteristics and crack resistance, while taking into account structural criteria that will provide the required set of strength and crack resistance properties. The method for deep and detailed analysis of the structure features, morphology and distribution of phase particles, their stoichiometric composition, substructure parameters, dislocation density in the coating material obtained due to multi-chamber detonation spraying has been developed in this paper. The research of detonation coating material was carried out using transmission electron microscopy (TEM) on JEM-200CX instrument (produced by JEOL company) with the accelerating voltage of up to 200 kV. The prospects of using the method of multi-chamber detonation spraying on various materials (steel, copper, aluminum, titanium) and alloys are shown on the basis of the research results. A number of composite coatings made of aluminum and zirconium ceramics; chromium, tungsten carbides have been obtained. It has been defined that changes occur in the ratio of the following parameters: microhardness, pore volume fraction, phase composition, distribution of dispersed phases, grain, subgrain, dislocation structures, etc, under different processing modes in the surface layers and corresponding change in the modes of detonation spraying.

• Periodical: Solid State Phenomena (Volume 355)
• Pages: 123-129
• DOI: https://doi.org/10.4028/p-qjM7yA
• Online since: February 2024
• Authors: Volodymyr Korzhyk, Olena M. Berdnikova*, Petro Stukhliak, Olga Kushnarova, Jun Jun Zhao, Ihor Skachkov
• Keywords: Composite Coatings, Crack Resistance, Detonation Spraying, Dislocation Density, Microhardness, Microstructure, Residual Stresses, Stoichiometric Composition, Strength Characteristics, Substructure

References

[1] Borysov Yu.S., Borysova A.L., Vigilyanska N.V., Gryshchenko O.P. and Kolomytsev M.V., Coatings based on Fe–Al intermetallics produced by the methods of plasma and supersonic plasma gas-air spraying Paton Welding Journal, 7 (2020) 29-37.

DOI: 10.37434/tpwj2020.07.04

[2] Hutsaylyuk V., Student M., Posuvailo V., Student O., Sirak Y., Hvozdets'kyi V., Maruschak P., Veselivska H., The properties of oxide-ceramic layers with Cu and Ni inclusions synthesizing by PEO method on top of the gas-spraying coatings on aluminium alloys. Vacuum. 179 (2020) art. no. 109514.

DOI: 10.1016/j.vacuum.2020.109514

[3] Kuzmych-Ianchuk I. K., Borisov Y. S., Bernatskyy, A. V., Laser-Microplasma Reactive Powder Spraying of Titanium Coatings with Nitride Phases. In Applied Mechanics and Materials. 682 (2014) 276-281. Borisova A.L., Adeeva L.I., Tunik A.Yu., Tsymbalistaya T.V. and Grishchenko A.P., Plasma ZrO2 coatings with metallic bond coat of alloy AlCuFe, Paton Welding Journal. 4 (2010). 25-29.

DOI: 10.4028/www.scientific.net/amm.682.276

[4] Stukhlyak P.D., Mytnyk M.M., Orlov V., Influence of boundary interlayers on properties of composite polymeric materials, Materials Science. 37 (2001) 80 – 86.

DOI: 10.1023/a:1012338422984

[5] Kolisnichenko O.V., Tyurin Yu.N. and Tovbin R, Efficiency of process of coating spraying using multichamber detonation unit, Paton Welding Journal. 10 (2017) 18-23.

DOI: 10.15407/tpwj2017.10.03

[6] Y. Tyurin; O. Kolisnichenko; J. Jia; N. Vasilik; M. Kovaleva; M. Prozorova; M. Arseenko; V. Sirota, Performance and Economic Characteristics of Multi-Chamber Detonation Sprayer Used in Thermal Spray Technology. May 10 2016, Paper No: itsc2016p0630, 630-634

DOI: 10.31399/asm.cp.itsc2016p0630

[7] Y. Tyurin; O. Kolisnichenko; J. Jia; N. Vasilik; M. Kovaleva; M. Prozorova; M. Arseenko; V. Sirota, Characterization and Properties of Cermet Coatings Formed by a New Multi-Chamber Detonation Sprayer. May 10–12, 2016, Paper No: itsc2016p0862, 862-865

DOI: 10.31399/asm.cp.itsc2016p0862

[8] F. Muhaffel, M. Kaba, G. Cempura, B. Derin, A. Kruk, E. Atar, Cimenoglu Influence of alumina and zirconia incorporations on the structure and wear resistance of titania-based MAO coatings, Surface and Coatings Technology. 377 (2019) 124900.

DOI: 10.1016/j.surfcoat.2019.124900

[9] Y Li, K. Khor, Mechanical properties of the plasma-sprayed Al2O3/ZrSiO4 coatings Surface and Coatings Technology, 150 (2002) 143-150.

DOI: 10.1016/s0257-8972(01)01526-2

[10] M. Morks, A. Kobayashi, Development of ZrO2/SiO2 bioinert ceramic coatings for biomedical application, Journal of the Mechanical Behavior of Biomedical Materials. 1 (2008) 165-171.

DOI: 10.1016/j.jmbbm.2007.09.002

[11] K.M. Lee, K.R. Shin, S. Namgung, B. Yoo, D.H., Shin Electrochemical response of ZrO2-incorporated oxide layer on AZ91 Mg alloy processed by plasma electrolytic oxidation, Surface and Coatings Technology, 205 (2011) 3779-3784.

DOI: 10.1016/j.surfcoat.2011.01.033

[12] M. Yu. Arseenko, M. G. Kovaleva, M. S. Prozorova, O. N. Vagina, M. N., Yapryntsev Fracture toughness of Al2O3/ZrSiO4 coatings obtained by multi-chamber gas-dynamic accelerator, 13th International Conference on Films and Coatings IOP Publishing IOP Conf. Series: Journal of Physics: Conf. Series 857 (2017) 012001

DOI: 10.1088/1742-6596/857/1/012001

[13] Y. Qian, W. Zhang. Phase-transformation behavior of plasma-sprayed ZrSiO4 coating materials, Journal of the Chinese Ceramic Society. 36 (2008) 1103-1108.

[14] Y. Wang, Z. Feng, C. Shengjie, Yu. Shengjie, Anti-oxidation and Infrared Characteristics of ZrSiO4 Coating, MATEC Web of Conferences 1(2016) 82:02012

DOI: 10.1051/matecconf/20168202012

[15] Kovaleva M. G., Prozorova M. S., Arseenko M. Yu., Yapryntsev M. N., Vagina O N, Properties and peculiarities of ceramic coatings on the Al2O3 and ZrSiO4 basis formed by a new multi-chamber gas-dynamic accelerator, International Journal of Applied Chemistry. 12 (2016) 593-601.

DOI: 10.3390/coatings7090142

[16] Poznyakov, V.D., Markashova, L.I., Shelyagin, V.D., Zhdanov, S.L., Bernats'kyi, A.V., Berdnikova, O.M., Sydorets', V.M, Cold Cracking Resistance of Butt Joints in High-Strength Steels with Different Welding Techniques. Strength of Materials. 51 (2019) 843-851.

DOI: 10.1007/s11223-020-00132-7

[17] Markashova L., Tyurin Y., Berdnikova O., Kolisnichenko O., Polovetskyi I., Titkov Y. Effect of Nano-Structured Factors on the Properties of the Coatings Produced by Detonation Spraying Method. In book: Pogrebnjak, A., Novosad, V. (eds). Advances in Thin Films, Nanostructured Materials, and Coatings. Lecture Notes in Mechanical Engineering. Springer, Singapore (2019) 109-117.

DOI: 10.1007/978-981-13-6133-3_11