Effects of Copper-Modified Activated Carbon on Natural Rubber Composite for Dielectric Materials

Abstract:

This study reports the development of an elastomeric dielectric material based on natural rubber (NR) composites reinforced with copper-modified activated carbon (Cu-Ac) derived from coconut shells. The Cu-Ac content was varied systematically (0, 5, 10, and 15 phr) at a fixed Cu concentration (2 wt%). The investigation focused on the influence of Cu-Ac content on various material properties, including curing time (tc⁹⁰), density, crosslink density, mechanical behavior, morphology, and dielectric response. The results revealed a significant impact of Cu-Ac content on the curing process, with an observed decrease in t_c90 at higher Cu-Ac loadings (10 and 15 phr). However, crosslink density exhibited a decreasing trend with increasing Cu-Ac content. Encouragingly, the inclusion of Cu-Ac demonstrated a positive influence on the mechanical properties of the composite. Notably, the dielectric properties confirmed the effect of Cu-Ac on NR, with enhancements observed within the frequency range of 1.35 to 2.03 GHz. This study provides valuable insights into the influence of Cu-Ac content on NR composites, suggesting their potential for improved performance in dielectric applications.

• Periodical: Solid State Phenomena (Volume 366)
• Pages: 29-36
• DOI: https://doi.org/10.4028/p-MFi7uV
• Online since: December 2024
• Authors: Thanathach Yingshataporn-A-Nan, Nathapong Sukhawipat*, Panachai Thusanaphoom, Thanadol Lardsaluk, Nattawut Moolchai, Wiwat Jeungthanasirigool, Narongrit Sosa
• Keywords: Activated Carbon, Copper, Dielectric Material, Elastomeric Material, Natural Rubber

References

[1] S. Hajra, A.M. Padhan, M. Sahu, P. Alagarsamy, K. Lee, H.J. Kim, Lead-free flexible Bismuth Titanate-PDMS composites: A multifunctional colossal dielectric material for hybrid piezo-triboelectric nanogenerator to sustainably power portable electronics, Nano Energy. 89 (2021) 106316. https://doi.org/.

DOI: 10.1016/j.nanoen.2021.106316

[2] A. Tsyganov, M. Vikulova, I. Zotov, I. Burmistrov, A. Gorokhovsky, N. Gorshkov, Synergistic effect of CaCu3Ti4O12 ceramic and Ti3C2Tx MXene nanoflakes on the dielectric properties of poly (vinylidene fluoride) composites, Materials Chemistry and Physics. 313 (2024) 128714. https://doi.org/https://doi.org/10.1016/j.matchemphys. 2023.128714.

DOI: 10.1016/j.matchemphys.2023.128714

[3] Q. He, K. Sun, Z. Shi, Y. Liu, R. Fan, Polymer dielectrics for capacitive energy storage: From theories, materials to industrial capacitors, Materials Today. 68 (2023) 298–333. https://doi.org/.

DOI: 10.1016/j.mattod.2023.07.023

[4] Y.M. Poplavko, Chapter 7 - Dielectrics, in: Y.M.B.T.-E.M. Poplavko (Ed.), Elsevier, 2019: p.287–408. https://doi.org/.

DOI: 10.1016/B978-0-12-815780-0.00007-4

[5] G.C. Psarras, 2 - Fundamentals of Dielectric Theories, in: Z.-M.B.T.-D.P.M. for H.-D.E.S. Dang (Ed.), Plastics Design Library, William Andrew Publishing, 2018: p.11–57. https://doi.org/.

DOI: 10.1016/B978-0-12-813215-9.00002-6

[6] N. Sukhawipat, N. Saetung, J.-F. Pilard, S. Bistac, A. Saetung, Synthesis and characterization of novel natural rubber based cationic waterborne polyurethane: Effect of emulsifier and diol class chain extender, Journal of Applied Polymer Science. 135 (2018).

DOI: 10.1002/app.45715

[7] N. Sukhawipat, N. Saetung, J.-F. Pilard, S. Bistac, A. Saetung, Effects of molecular weight of hydroxyl telechelic natural rubber on novel cationic waterborne polyurethane: A new approach to water-based adhesives for leather applications, International Journal of Adhesion and Adhesives. 99 (2020).

DOI: 10.1016/j.ijadhadh.2020.102593

[8] J. Junthip, N. Chaipalee, Y. Sangsorn, C. Maspornpat, J. Jitcharoen, S. Limrungruengrat, T. Chotchuangchutchaval, E. Martwong, N. Sukhawipat, The Use of New Waste-Based Plasticizer Made from Modified Used Palm Oil for Non-Glutinous Thermoplastic Starch Foam, Polymers. 14 (2022).

DOI: 10.3390/polym14193997

[9] C. Quan, N. Miskolczi, S. Feng, P. Grammelis, C. Wu, N. Gao, Effect of type of activating agent on properties of activated carbon prepared from digested solid waste, Journal of Environmental Management. 348 (2023) 119234. https://doi.org/https://doi.org/.

DOI: 10.1016/j.jenvman.2023.119234

[10] D.A. Meadows, D.E. Clouse, S. Adhikari, V.A. Davis, Prediction of structural properties of activated carbons derived from lignocellulosic biomass components using mixture design of experiments, Materials Chemistry and Physics. 303 (2023) 127715. https://doi.org/.

DOI: 10.1016/j.matchemphys.2023.127715

[11] M. Zahid, H.M. Khan, M. Zeewaqar Manzoor, H. Ejaz Ahmed, T. Akhter, T. Alshahrani, M. Imran, M.A. Assiri, Optimization of structural, dielectric, and magnetic properties of nanocrystalline copper doped spinel ferrites, Materials Science and Engineering: B. 297 (2023) 116739. https://doi.org/.

DOI: 10.1016/j.mseb.2023.116739

[12] R. Priyadharsini, C. Manoharan, M. Bououdina, S. Sagadevan, M. Venkateshwarlu, S. Asath Bahadur, Impact of nickel substitution on structural, dielectric, magnetic, and electrochemical properties of copper ferrite nanostructures for energy storage devices, Journal of Colloid and Interface Science. 653 (2024) 917–929. https://doi.org/.

DOI: 10.1016/j.jcis.2023.09.113

[13] H. Wang, Y. Yang, L. Yang, Optimization of dielectric loss in calcium copper titanate based on different doping modification strategies, Ceramics International. 49 (2023) 38399–38419. https://doi.org/.

DOI: 10.1016/j.ceramint.2023.09.186

[14] C. Hiranobe, G. Ribeiro, G. Barrera, E. Reis, F. Cabrera, A. Job, L. Paim, R. dos Santos, Cross-Linked Density Determination of Natural Rubber Compounds by Different Analytical Techniques, Materials Research. 24 (2021).

DOI: 10.1590/1980-5373-mr-2021-0041

[15] Y. Liu, X. Han, W. Bao, X. Ding, X. Zhao, Study on Electromagnetic Properties of Graphite/Graphene/Silver-Coated Copper Powder Monolayer Coated Composites, Fibres & Textiles in Eastern Europe. 31 (2023).

DOI: 10.2478/ftee-2023-0009