Surface Wettability Response of Hydroxyapatite-Doped Coatings on Metallic Biomaterials: A Concise Review

Abstract:

The surface wettability of metallic biomaterials significantly influences the biological response of biomedical implants. However, the optimal degree of wettability depends on the specific coating or surface treatment applied to the biomaterial. Researchers have widely utilised hydroxyapatite coatings to modify implant surfaces to enhance bioactivity, biocompatibility, and osseointegration. This review article discussed the impact of hydroxyapatite-doped coatings on the surface wettability of metallic biomaterials. A systematic search of Scopus and Web of Science databases was conducted to review recent studies investigating the wettability and biological response of hydroxyapatite-doped coatings applied through standard implant surface deposition techniques. Results reveal that hydroxyapatite-doped coatings are typically hydrophilic and have higher surface energy than uncoated hydrophobic metallic surfaces. The hydrophilic nature promotes better interaction with biological fluids, resulting in cell adhesion and proliferation. The rough and porous surface increases wettability as fluid can easily penetrate the craters. Further research may elucidate the complex connectivity of deposition method process parameters with surface wettability and biological outcomes. This review briefly overviews current research on hydroxyapatite-doped coatings and their effects on surface wettability and biointegration.

• Periodical: Solid State Phenomena (Volume 370)
• Pages: 61-72
• DOI: https://doi.org/10.4028/p-c4DEVS
• Online since: March 2025
• Authors: Iqtidar Ahmed Gul*, Ahmad Majdi Abdul-Rani, Azlan Ahmad, Md Al-Amin, Abdul'azeez Abdu Aliyu, Elhuseini Garba
• Keywords: Coating, Contact Angle, Hydrophilic, Hydrophobic, Hydroxyapatite, Metallic Biomaterials, Wettability

References

[1] Breme H, Biehl V, Reger N, Gawalt E. Metallic biomaterials: Introduction. Handb Biomater Prop Second Ed 2016:151–8.

DOI: 10.1007/978-1-4939-3305-1_14

[2] Harun WSW, Asri RIM, Alias J, Zulkifli FH, Kadirgama K, Ghani SAC, et al. A comprehensive review of hydroxyapatite-based coatings adhesion on metallic biomaterials. Ceram Int 2018;44:1250–68.

DOI: 10.1016/j.ceramint.2017.10.162

[3] Yan X, Cao W, Li H. Biomedical alloys and physical surface modifications: A mini-review. Materials (Basel) 2022;15.

DOI: 10.3390/ma15010066

[4] Bisaria H, Bhusan Patra B, Mohanty S. Surface modification during hydroxyapatite powder mixed electric discharge machining of metallic biomaterials: a review. Surf Eng 2022;38:680–706.

DOI: 10.1080/02670844.2022.2155406

[5] Choi SR, Kwon JW, Suk KS, Kim HS, Moon SH, Park SY, et al. The Clinical Use of Osteobiologic and Metallic Biomaterials in Orthopedic Surgery: The Present and the Future. Materials (Basel) 2023;16.

DOI: 10.3390/ma16103633

[6] Prasad K, Bazaka O, Chua M, Rochford M, Fedrick L, Spoor J, et al. Metallic biomaterials: Current challenges and opportunities. Materials (Basel) 2017;10.

DOI: 10.3390/ma10080884

[7] Eliaz N. Corrosion of metallic biomaterials: A review. Materials (Basel) 2019;12:407.

DOI: 10.3390/ma12030407

[8] Asri RIM, Harun WSW, Samykano M, Lah NAC, Ghani SAC, Tarlochan F, et al. Corrosion and surface modification on biocompatible metals: A review. Mater Sci Eng C 2017;77:1261–74.

DOI: 10.1016/j.msec.2017.04.102

[9] Ali S, Abdul Rani AM, Baig Z, Ahmed SW, Hussain G, Subramaniam K, et al. Biocompatibility and corrosion resistance of metallic biomaterials. Corros Rev 2020;38:381–402.

DOI: 10.1515/corrrev-2020-0001

[10] Xiao M, Chen YM, Biao MN, Zhang XD, Yang BC. Bio-functionalisation of biomedical metals. Mater Sci Eng C 2017;70:1057–70.

DOI: 10.1016/j.msec.2016.06.067

[11] Gutiérrez Púa LDC, Rincón Montenegro JC, Fonseca Reyes AM, Zambrano Rodríguez H, Paredes Méndez VN. Biomaterials for orthopedic applications and techniques to improve corrosion resistance and mechanical properties for magnesium alloy: a review. J Mater Sci 2023;58:3879–908.

DOI: 10.1007/s10853-023-08237-5

[12] Shi L, Shi L, Wang L, Duan Y, Lei W, Wang Z, et al. The Improved Biological Performance of a Novel Low Elastic Modulus Implant. PLoS One 2013;8:e55015.

DOI: 10.1371/journal.pone.0055015

[13] Singh G, Saini A. Developments in metallic biomaterials and surface coatings for various biomedical applications. In: Singh S, Prakash C, Ramakrishna S, Krolczyk G, editors. Lect. Notes Mech. Eng., Singapore: Springer Singapore; 2020, p.197–206.

DOI: 10.1007/978-981-15-4748-5_20

[14] Nouri A, Wen C. Introduction to surface coating and modification for metallic biomaterials. In: Wen CBT-SC and M of MB, editor. Surf. Coat. Modif. Met. Biomater., Woodhead Publishing; 2015, p.3–60.

DOI: 10.1016/B978-1-78242-303-4.00001-6

[15] Miri Z, Haugen HJ, Loca D, Rossi F, Perale G, Moghanian A, et al. Review on the strategies to improve the mechanical strength of highly porous bone bioceramic scaffolds. J Eur Ceram Soc 2023;44:23–42.

DOI: 10.1016/j.jeurceramsoc.2023.09.003

[16] Drevet R, Fauré J, Benhayoune H. Bioactive Calcium Phosphate Coatings for Bone Implant Applications: A Review. Coatings 2023;13.

DOI: 10.3390/coatings13061091

[17] Bushra A, Subhani A, Islam N. A comprehensive review on biological and environmental applications of chitosan-hydroxyapatite biocomposites. Compos Part C Open Access 2023;12.

DOI: 10.1016/j.jcomc.2023.100402

[18] Saxena V, Pandey L, Srivatsan TS. Nano Hydroxyapatite (nano-HAp): A Potential Bioceramic for Biomedical Applications. Curr Nanomater 2021;6:207–21.

DOI: 10.2174/2405461506666210412154837

[19] Chakraborty R, Sengupta S, Saha P, Das K, Das S. Synthesis of calcium hydrogen phosphate and hydroxyapatite coating on SS316 substrate through pulsed electrodeposition. Mater Sci Eng C 2016;69:875–83.

DOI: 10.1016/j.msec.2016.07.044

[20] Bryington MS, Hayashi M, Kozai Y, Vandeweghe S, Andersson M, Wennerberg A, et al. The influence of nano hydroxyapatite coating on osseointegration after extended healing periods. Dent Mater 2013;29:514–20.

DOI: 10.1016/j.dental.2013.02.004

[21] Mihailescu N, Stan GE, Duta L, Chifiriuc MC, Bleotu C, Sopronyi M, et al. Structural, compositional, mechanical characterisation and biological assessment of bovine-derived hydroxyapatite coatings reinforced with MgF2 or MgO for implants functionalisation. Mater Sci Eng C 2016;59:863–74.

DOI: 10.1016/j.msec.2015.10.078

[22] Wen C, Zhan X, Huang X, Xu F, Luo L, Xia C. Characterization and corrosion properties of hydroxyapatite/graphene oxide bio-composite coating on magnesium alloy by one-step micro-arc oxidation method. Surf Coatings Technol 2017;317:125–33.

DOI: 10.1016/j.surfcoat.2017.03.034

[23] Gittens RA, Scheideler L, Rupp F, Hyzy SL, Geis-Gerstorfer J, Schwartz Z, et al. A review on the wettability of dental implant surfaces II: Biological and clinical aspects. Acta Biomater 2014;10:2907–18.

DOI: 10.1016/j.actbio.2014.03.032

[24] Fadzil AF bin A, Pramanik A, Basak AK, Prakash C, Shankar S. Role of surface quality on biocompatibility of implants - A review. Ann 3D Print Med 2022;8:100082.

DOI: 10.1016/j.stlm.2022.100082

[25] Villapun Puzas VM, Carter LN, Schröder C, Colavita PE, Hoey DA, Webber MA, et al. Surface Free Energy Dominates the Biological Interactions of Postprocessed Additively Manufactured Ti-6Al-4V. ACS Biomater Sci Eng 2022;8:4311–26.

DOI: 10.1021/acsbiomaterials.2c00298

[26] Rupp F, Gittens RA, Scheideler L, Marmur A, Boyan BD, Schwartz Z, et al. A review on the wettability of dental implant surfaces I: Theoretical and experimental aspects. Acta Biomater 2014;10:2894–906.

DOI: 10.1016/j.actbio.2014.02.040

[27] Kung CH, Sow PK, Zahiri B, Mérida W. Assessment and Interpretation of Surface Wettability Based on Sessile Droplet Contact Angle Measurement: Challenges and Opportunities. Adv Mater Interfaces 2019;6:1900839.

DOI: 10.1002/admi.201900839

[28] Song JW, Fan LW. Temperature dependence of the contact angle of water: A review of research progress, theoretical understanding, and implications for boiling heat transfer. Adv Colloid Interface Sci 2021;288:102339.

DOI: 10.1016/j.cis.2020.102339

[29] Sun L, Guo J, Chen H, Zhang D, Shang L, Zhang B, et al. Tailoring Materials with Specific Wettability in Biomedical Engineering. Adv Sci 2021;8:2100126.

DOI: 10.1002/advs.202100126

[30] Gul IA, Abdul-Rani AM, Al-Amin M, Garba E. Elucidating Powder-Mixed Electric Discharge Machining Process, Applicability, Trends and Futuristic Perspectives. Machines 2023;11.

DOI: 10.3390/machines11030381

[31] Joshi AY, Joshi AY. A systematic review on powder mixed electrical discharge machining. Heliyon 2019;5:e02963.

DOI: 10.1016/j.heliyon.2019.e02963

[32] Al-Amin M, Abdul-Rani AM, Rana M, Hastuty S, Danish M, Rubaiee S, et al. Evaluation of modified 316L surface properties through HAp suspended EDM process for biomedical application. Surfaces and Interfaces 2022;28:101600.

DOI: 10.1016/j.surfin.2021.101600

[33] Al-Amin M, Abdul-Rani AM, Rao TVVLN, Danish M, Rubaiee S, Mahfouz A bin, et al. Investigation of machining and modified surface features of 316L steel through novel hybrid of HA/CNT added-EDM process. Mater Chem Phys 2022;276:125320.

DOI: 10.1016/j.matchemphys.2021.125320

[34] Devgan S, Sidhu SS. Potential of electrical discharge treatment incorporating MWCNTs to enhance the corrosion performance of the β-titanium alloy. Appl Phys A Mater Sci Process 2020;126:1–16.

DOI: 10.1007/s00339-020-3391-1

[35] Yaşar H, Ekmekci B. The effect of micro and nano hydroxyapatite powder on biocompatibility and surface integrity of Ti6Al4V (ELI) in powder mixed electrical discharge machining. Surf Topogr Metrol Prop 2021;9:15015.

DOI: 10.1088/2051-672X/abdda2

[36] Ou SF, Wang CY. Fabrication of a hydroxyapatite-containing coating on Ti-Ta alloy by electrical discharge coating and hydrothermal treatment. Surf Coatings Technol 2016;302:238–43.

DOI: 10.1016/j.surfcoat.2016.06.013

[37] Akhtar M, Uzair SA, Rizwan M, Ur Rehman MA. The Improvement in Surface Properties of Metallic Implant via Magnetron Sputtering: Recent Progress and Remaining Challenges. Front Mater 2022;8.

DOI: 10.3389/fmats.2021.747169

[38] Dinu M, Kiss AE, Parau AC, Braic V, Vitelaru C, Braic M, et al. Influence of thermal treatment on the roughness, corrosion resistance and wettability of hydroxyapatite films deposited by RF magnetron sputtering. Key Eng Mater 2014;587:297–302.

DOI: 10.4028/www.scientific.net/KEM.587.297

[39] Grubova IY, Surmeneva MA, Ivanova AA, Kravchuk K, Prymak O, Epple M, et al. The effect of patterned titanium substrates on the properties of silver-doped hydroxyapatite coatings. Surf Coatings Technol 2015;276:595–601.

DOI: 10.1016/j.surfcoat.2015.06.010

[40] Surmeneva M, Nikityuk P, Hans M, Surmenev R. Deposition of ultrathin nano-hydroxyapatite films on laser micro-textured titanium surfaces to prepare a multiscale surface topography for improved surfacewettability/energy. Materials (Basel) 2016;9.

DOI: 10.3390/ma9110862

[41] Behera RR, Das A, Pamu D, Pandey LM, Sankar MR. Mechano-tribological properties and in vitro bioactivity of biphasic calcium phosphate coating on Ti-6Al-4V. J Mech Behav Biomed Mater 2018;86:143–57.

DOI: 10.1016/j.jmbbm.2018.06.020

[42] Bhawanjali S, Revathi A, Popat KC, Geetha M. Surface modification of Ti-13Nb-13Zr and Ti-6Al-4V using electrophoretic deposition (EPD) for enhanced cellular interaction. Mater Technol 2014;29.

DOI: 10.1179/1753555713Y.0000000119

[43] Farnoush H, Aldiç G, Çimenoğlu H. Functionally graded HA-TiO2 nanostructured composite coating on Ti-6Al-4V substrate via electrophoretic deposition. Surf Coatings Technol 2015;265:7–15.

DOI: 10.1016/j.surfcoat.2015.01.069

[44] Bartmanski M, Cieslik B, Glodowska J, Kalka P, Pawlowski L, Pieper M, et al. Electrophoretic deposition (EPD) of nanohydroxyapatite - nanosilver coatings on Ti13Zr13Nb alloy. Ceram Int 2017;43:11820–9.

DOI: 10.1016/j.ceramint.2017.06.026

[45] Rafieerad AR, Bushroa AR, Nasiri-Tabrizi B, Baradaran S, Shahtalebi S, Khanahmadi S, et al. In-vitro bioassay of electrophoretically deposited hydroxyapatite–zirconia nanocomposite coating on Ti–6Al–7Nb implant. Adv Appl Ceram 2017;116:293–306.

DOI: 10.1080/17436753.2017.1313626

[46] Ahmed Y, Ur Rehman MA. Improvement in the surface properties of stainless steel via zein/hydroxyapatite composite coatings for biomedical applications. Surfaces and Interfaces 2020;20:100589.

DOI: 10.1016/j.surfin.2020.100589

[47] Woźniak A, Staszuk M, Reimann Ł, Bialas O, Brytan Z, Voinarovych S, et al. The influence of plasma-sprayed coatings on surface properties and corrosion resistance of 316L stainless steel for possible implant application. Arch Civ Mech Eng 2021;21.

DOI: 10.1007/s43452-021-00297-1

[48] Bansal P, Singh G, Sidhu HS. Plasma-Sprayed Hydroxyapatite-Strontium Coating for Improved Corrosion Resistance and Surface Properties of Biodegradable AZ31 Mg Alloy for Biomedical Applications. J Mater Eng Perform 2021;30:1768–79.

DOI: 10.1007/s11665-021-05490-0

[49] Bansal P, Singh G, Sidhu HS. Investigation of corrosion behavior and surface properties of plasma sprayed HA/Sr reinforced coatings on CoCr alloys. Mater Chem Phys 2020;253:123330.

DOI: 10.1016/j.matchemphys.2020.123330

[50] Singh B, Singh G, Sidhu BS, Bhatia N. In-vitro assessment of HA-Nb coating on Mg alloy ZK60 for biomedical applications. Mater Chem Phys 2019;231:138–49.

DOI: 10.1016/j.matchemphys.2019.04.037

[51] Singh B, Singh G, Sidhu BS. Analysis of corrosion behaviour and surface properties of plasma-sprayed composite coating of hydroxyapatite–tantalum on biodegradable Mg alloy ZK60. J Compos Mater 2019;53:2661–73.

DOI: 10.1177/0021998319839127