Search results

X-ray photo- electron spectroscopy (XPS) data of the samples were obtained with an ESCALab220i-XL electron spectrometer from VG Scientific using a 300 W Al Ka irradiation.
Wavelength Effect on Photocatalytic Reduction of CO2 by Ag/TiO2 Catalyst.

However, the reduction of the (220) nucleation density was offset by the high density of SiH3 precursors produced during the Plasma running.
By correlating the data resulting from FESEM, it is shown that the film thickness increases from 220nm to 450nm with TS increasing from 35°C to 250°C.

So most of the laboratory simulation studies may not address engineering applications and provide scientific and effective data.
In order to make it more suitable for the complex component of garbage in China, this process was improved, and the characteristics of the improved process have achieved the reduction and dehydration of the waste.

Introduction Currently, there are global calls for CO2 reduction and efficient energy operation in order to build a sustainable society, and in the field of power electronics, the use of SiC as an alternative material to Si and its widespread use are accelerating in order to realize such a society as soon as possible.　
Furthermore, the obtained data indicate that there is the point at which the glide velocity becomes zero, i.e., the “threshold” intensity below which 1SSF expansion doesn’t occur at each stimulus (current density and UV irradiance), and therefore those “threshold” s were also estimated.

H+ obtained from the ionized water in the junction of SBS BPM migrates from cationic membrane (SBS-g-(AA-StSO3Na-SiO2)) into cathode chamber to supply the consumption of H+ in the process of oxalate–reduction.
The data suggest that the thermal stability of the SBS copolymer in the hybrid membranes is highly enhanced by the nanolevel confinement in the inorganic SiO2 framework.

In shear and transverse direction, a first approximation of the damage development, which corresponds to a linear law with respect to the square root of the equivalent associated force Y, shows a good fit with the experimental data: (6) if ( < or < ) else d22=1 (7) where the constant parameters and correspond to the threshold and the critical values of the development of (which varies from 0 to 1) and the coefficients c stands for the ratio between the transverse damage and the shear damage, generally it equals 1.
A well known problem with the application of continuum failure models which provides the material stiffness reduction by computing homogenized material properties of the cracked ply is that mesh dependence is introduced, due to ill-posedness of the mathematical problem.

In [21] a 3D Finite Element-based model was developed to predict the surface integrity of the EBM Ti6Al4V after dry and cryogenic machining: to do that, the thickness of the alpha lamellae that characterize the microstructure of the AM metal was predicted by means of an empirical model calibrated through experimental data.
Maier, Application of mechanical surface finishing processes for roughness reduction and fatigue improvement of additively manufactured Ti-6Al-4V parts.

In particular the main problem is represented [15] by the need to avoid the anatase to rutile phase transformation, which implies a reduction of photoactivity [16-18] but also excludes the application of the photocatalyzer before the sintering step that industrially is performed at 1200-1220°C.
The obtained data allowed to determined the specific photoactivity of the samples defined as: (1) where Rdark is the specific degradation rate without UV radiation and Rirr is the specific degradation rate with UV radiation, as defined in [63].

In order to simplify the calculation, the equivalent stiffness modulus reduction method was used to change middle column of subway station and aboveground structure frame to equivalent continuous wall to study the influence of plain strain element to simulate three-dimensional subway station middle column and aboveground structure frame.
Output position number of beam Output position number of column Fig 6 Location of the output data for moment and shear force Table 3 The peak shear at the bottom of the high rise building Number NJ10 TAFT1.0 LP1.0 Number NJ10 TAFT1.0 LP1.0 N-NJ /kN m N-TAFT /kN m N-LP /kN m N-NJ /kN m N-TAFT /kN m N-LP /kN m 1 274.2 0.97 340.2 0.99 339.7 1.01 C 554.7 1.02 742.6 1.05 704.5 1.03 2 266.9 1.01 345.3 1.00 340.5 1.01 D 325.1 1.02 397.4 1.01 416.8 1.01 3 539.9 1.08 815.1 1.03 818.6 1.01 E 328.3 1.06 463.1 0.98 419.1 1.04 4 539.7 1.08 815.5 1.03 819.4 1.01 F 558.3 1.07 770.7 1.02 730.9 1.00 5 299.2 0.96 342.5 0.99 344.4 1.01 G 549.6 1.06 778.2 1.06 738.8 1.04 6 304.0 0.97 339.7 0.99 346.6 1.00 H 321.5 1.03 434.6 1.00 429.1 1.02 7 252.8 0.96 335.0 1.00 341.2 1.00 I 548.1 1.05 695.6 0.90 585.3 1.10 8 254.4 0.97 339.4 1.01 341.7 1.00 J 467.7 1.01 556.1 1.07 589.7 1.21 9 610.3 1.01 717.2 1.07 792.5 1.02 K 477.0 0.97 500.9 1.21 556.5 1.06 10 610.6 1.01 716.6 1.07 792.7 1.02 L 573.9 1.09 695.3

Additionally, [24] gave valid design rules for noise reduction.
ISBN 3-540-60782-3, Springer Verlag, 1994 [5] Große, A.: Interdisziplinäre Werkstoffauswahl durch Aufbau eines Material Data Mart.