Natural Materials for Thermal Insulation: Mulch and Lava-Rock Characterizations

Abstract:

This paper reports on the thermal characterization, via the thermal conductivity, of natural materials, such as mulch and lava rock and their usefulness as building insulation. Experiments were carried out using a scale one monitored wall (i.e. heat flux and temperature sensors) exposed to a heating source on one side and to an air conditioned space on the other. The wall system was composed of an 8.85 cm thick cavity, where the mulch and lava rock were placed. The cavity was enclosed between two layers of pine wood (40 mm thick each). After the experiments and statistical data manipulation, the estimated thermal conductivity of the materials were 0.48 ± 0.001 W.m^-1.K^-1 and 0.129 ± 0.003 W.m^-1.K^-1 for mulch and lava-rock, respectively. That is, mulch has a thermal conductivity comparable to that of bulk hemp while lava rock has a thermal conductivity comparable to that of hemp brick. These values indicate the usefulness of mulch, compared to the impracticality of using lava-rocks materials for building insulation.

• Periodical: Applied Mechanics and Materials (Volume 705)
• Pages: 8-13
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.705.8
• Online since: December 2014
• Authors: Aurélien P. Jean, Craig Adams, Mario A. Medina, Frédéric Miranville
• Keywords: Construction, Lava-Rock, Mulch, Natural Materials, Thermal Characterization, Thermal Conductivity

References

[1] Erenstein, O. (2003), Smallholder conservation farming in the tropics and sub-tropics: a guide to the development and dissemination of mulching with crop residues and cover crops., Agriculture, Ecosystems and Environment 100, 17–37.

DOI: 10.1016/s0167-8809(03)00150-6

[2] Asdrubali, F. and Baldinelli, G. (2011), Thermal transmittance measurements with the hot box method: Calibration, experimental procedures, and uncertainty analyses of three different approaches, Energy and Buildings 43(7), 1618 – 1626.

DOI: 10.1016/j.enbuild.2011.03.005

[3] Bouguerra, A., Aït-Mokhtar, A., Amiri, O. and Diop, M. (2001).

[4] Childs, P. (2001).

[5] Diller, T. (1999), Heat flux. In: The Measurement Instrumentation and Sensors Handbook, Boca Raton, Florida: CRC Press LLC.

[6] Cesaratto, P., De Carli, M. and Marinetti, S. (2011), Effect of different parameters on the in situ thermal conductance evaluation, Energy and Buildings 43(7), 1792–1801.

DOI: 10.1016/j.enbuild.2011.03.021

[7] Kreith, F., Boehm, R., George, D. Raithby, G.D., Hollands, K.G.T., Suryanarayana, N.V., Modest, M.F., Carey, V.P., Chen, J.C., Lior, N., Shah, R.K., Bell, K. J, Moffat, R.J., Mills, A.M., Bergles, A.E., Swanson, L.W., Antonetti, V.W., Irvine, T.F. Jr., and Capobianchi, M., (1999).

DOI: 10.1201/9781420041583.ch4

[8] Kymäläinen, H. -R. and Sjöberg, A. -M. (2008), Flax and hemp fibres as raw materials for thermal insulations, Building and Environment 43(7), 1261 – 1269.

DOI: 10.1016/j.buildenv.2007.03.006

[9] Arnaud, L. (2000), Mechanical and thermal properties of hemp mortars and wools: experimental and theoretical approaches, in BIORESOURCE HEMP 2000 and other fibre crops, nova-Institut und Tritec, Wolfsburg 13-16.

[10] Jean, A. P., Boyer, H., Adams, C., Fakra, A. H., Medina, M. and Miranville, F. (2012).

[11] Boyer, H., Chabriat, J., Grondin-Perez, B., Tourrand, C. and Brau, J. (1996), Thermal building simulation and computer generation of nodal models, Building and Environment 31 (3), 207–214.

DOI: 10.1016/0360-1323(96)00001-7