The Usage of Pet Kok is a Possibility of Reducing the Amount of Heavy Oil in the Rotary Kilns in the New Foundry of the New Ferronikel in Drenas

Abstract:

In this project we have represented the reduction of the ancillary heavy oil substance in the rotary kilns in the new foundry of the new Ferronickel in Drenas, with the use of the ancillary substance Pet Kok. The experimental and industrial research have been analyzed during the years 2008,2009,2010,2011,2012 and 2013. The chemical composition of heavy oil was analyzed in the INKOS Institute in Obiliq, while the composition of Pet Kok in the laboratory of the new foundry in the new Ferronickel in Drenas. The use of Pet Kok reduces the attachment of the substances in the rotary kilns walls, and it impacts the benefit of the calcines in a higher temperature and quality. The big amount of moisture of the Fe-Ni ore and the lack of an adequate dryer to reduce the moisture of the ore are two of the many factors of the large amount of ancillary substances in the rotary kilns. On 12.05.2011 pet kok has begun to be used in rotary kiln two, while in rotary kiln one pet kok has been used from 1.09.2012, the favorable impact of the use of pet kok in the technological process in the new foundry of the new Ferronickel in Drenas in the qualitative iron-nickel affected the reduction of the amount of heavy oil.

• Periodical: Applied Mechanics and Materials (Volume 749)
• Pages: 111-115
• DOI: https://doi.org/10.4028/www.scientific.net/AMM.749.111
• Online since: April 2015
• Authors: Zarife Bajraktari Gashi*, Rrahim Maksuti, Nagip Murati
• Keywords: Calcine, Etc, Fe-Ni, Heavy Oil, Ore, Pet-Kok, Rotary-Kiln

References

[1] Gashi Z., Imeri Sh., Tahiraj N.: Kosovo dry lignite treatment in the process of ore frying in the smelter of New co Ferronickel in Drenas, SGEM-201111thInternational Multidisciplinary Scientific Geo Conference.

DOI: 10.5593/sgem2011/s04.110

[2] Gashi Z., Imeri Sh., Lohja N., Zabeli M., Tahiraj N.: Murati N.: Experimental Research on pre-reduction of Nickel silicate ore in New Ferronickel Factory in Drenas, WSEAS and NAUN Conferences, Corfu Island, Greece, July 14-17, (2011).

[3] Gashi Z, Imeri Sh, Tahiraj N, Murati N.: Drying of Ni in silicate ore dry machine and rotary effects on technological process in the rotary kiln in smelting complex of Ferronickel in Drenas, Alb-Shkenca, Tirana (2010).

[4] Gashi Z, LOHJA N, GASHI I.: Rotary kiln simulation laboratory , Linder" the purpose of increasing nickel ores preproduction- METALURGIA INTERNATIONAL Special Issue vol. XVIII no. 1 (2013).

[5] Gashi Z, Nexhmedin Lohja, Nagip Murati: ROTATING FURNACE SIMULATION LABORATORY LINDER, INORDER OF INCREASING NICKEL ORES PRE-REDUCTION, AIS Vlore Conference 2012, 26-27 November, University Pavaresia, Vlora -Republic of Albania.

[6] Daily, monthly and yearly reports of obtaining Fe-Ni, official documentation of smelting complex of New CoFerronikeli Complex - Drenas, 2009 , 2010, 2011, 2012 and (2013).

[7] Zarife Bajraktari-Gashi: Teorical and experimental research in order to reach optimum technical, technologic and productive parameters during qualitative reduction of Ni ore in Fe-Ni foundry in Drenas, PHD, 2012, Mitrovica, Republic of Kosovo.

[8] Zarife Gashi, Ibrahim Gashi, Mursel Rama: Mathematical modelin of nikel ores pre-reduction simulations in laboratrory rotary kiln"Linder,; International Journal of General Engineering and Technology (IJGET), ISSN 2278-9928Vol. 2, Issue 2, May 2013, 17-28© IASET.