Static Recrystallization and Texture Evolution of 316L Stainless Steel Fibers

Hai Ou Yu; Yan Wang; Yong Liu; Hui Ping Tang

doi:10.4028/www.scientific.net/AMR.1052.45

Paper Titles

Mechanical Properties and Toughening Mechanisms of Multi-Walled Carbon Nanotube Reinforced Yttria-Stabilized Zirconia Composite
p.24

Energetic Studies on the B Effect on the Oxidation of γ-TiAl Alloys
p.28

Carbon Fiber Reinforced SiC Matrix Composites Fabricated by Preceramic Impregnation and Pyrolysis Process Combining SiC Nano Powder Infiltration
p.34

Fabrication of TiB₂/TiC Duplex Particles Reinforced Carbon Steel Matrix Surface Composite
p.40

Static Recrystallization and Texture Evolution of 316L Stainless Steel Fibers
p.45

Research in an Original Si-Mn-Mo-Nb 800MPa Dual Phase Steel with Low Carbon
p.51

Effect of Copper Content on Mechanical Properties of Short Carbon Fiber Reinforced ZrC Mateix Composites
p.55

Study on the Brush Plating Technology of Super-Strength Duralumin
p.61

Polyurethane Nanocomposite Films by Using Cellulose Nanospheres as Green Nanofillers
p.65

HomeAdvanced Materials ResearchAdvanced Materials Research Vol. 1052Static Recrystallization and Texture Evolution of...

Static Recrystallization and Texture Evolution of 316L Stainless Steel Fibers

Abstract:

By isothermal annealing tests, the recrystallization and grain growth behaviors of 316L stainless steel fibers with a diameter of 8 μm were investigated using the optical microscope (OM), scanning electron microscope (SEM) and X-ray texture analysis methods. The average grain size of the fibers with a diameter of 8 μm annealed at different conditions was quantitatively measured. The grain growth equations of the fibers were constructed, and the activation energies for grain growth of the fibers were also determined. Meanwhile, efforts have been paid on analyzing the texture evolution of 316L stainless steel fibers before and after annealing.