Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling

Abstract:

Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology, widely applied in HSLA steel plate production. However, there are still certain limitations, especially for thicker plate. The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing. Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time, can restrict austenite grain growth, and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits. Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC. Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens, and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness. However, some aspects of the gradients were addressed with tests using cold platens. The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.

• Periodical: Advanced Materials Research (Volume 409)
• Pages: 443-448
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.409.443
• Online since: November 2011
• Authors: B. Xiao, Eric J. Palmiere, A.A. Howe, H.C. Carey
• Keywords: Finite Element Modeling (FEM), Grain Growth, Intermediate Forced Cooling, Plane Strain Compression, Recrystallization, Steel Plate Rolling, Strain Distribution, Temperature Distribution

References

[1] A. L. Sjong, et al. Fracture behavior of Nb-V-Ti microalloyed plates processed with and without intermediate cooling. in Materials solutions conference, International symposium of microalloyed steels 2002. 2002. Columbus, Ohio: ASM International. P: 92-100.

[2] C. A. Abel, et al. Instand cooling during the processing of controlled rolled plates to improve mill productivity. in 39th Mechanical Working and Steel Processing. 1998: ISS-AIME. P: 545-554.

[3] C. Dilg, et al., TMCP process including two accelerated cooling stages. Revue de Metallurgie, 1995. July: pp.883-892.

DOI: 10.1051/metal/199592070883

[4] J. G. Williams, et al. Controlled rolling of heavy plates for offshore plateform application. in Processing, microstructure and properties of HSLA steels. 1987. Pittsburgh: TMS. P: 133-152.

[5] H. Abrams. Accelerated spray cooling to a reduced intermediate temperature for controlled rolling. in Mechanical Working and Steel Processing Coference XXI. 1984: ISS-AIME. P: 423-445.

[6] D. M. Fegredo, J. D. Boyd, and M. J. Stewart. The effects of accelerated processing on the microstructure and mechanical properties of V- and V+Nb HSLA steels. in HSLA Steels: Technology and Applications. 1983. Philadelphia, Pennsylvania: American society for metals. P: 95-105.

DOI: 10.1179/030716977803292790

[7] P. J. Heedman, S. P. Rutqvist, and J. A. Sjostrom, Controlled rolling of plate with forced-water cooling during rolling. Metals Technology, 1981: pp.352-360.

DOI: 10.1179/030716981803275848

[8] D. M. Fegredo, Hold-period accelerated cooling experiments on Nb- and Ti-HSLA Steels. Metals Technology, 1977: pp.417-424.

DOI: 10.1179/030716977803292790