Paper Titles

Preface, Organizing Committees and Sponsor

Study on Thermal Fatigue Life Prediction of Cylinder Head
p.3

Lifetime Prediction of Thermo-Mechanical Fatigue for Exhaust Manifold
p.9

Experimental Study on Boiling Heat Transfer in Cylinder Head Jacket
p.18

Determination of Pd(II) in Street Dust and Water Samples by FAAS after Preconcentration with Dimethylglyoxime-Anchored Organobentonite
p.24

Study on the Characteristics of a Pneumatic Spring with Bellow
p.29

Biosorption of Acid Red R from Aqueous Solution by Acid-Treated Penicillium sp.
p.35

Investigation on Free Vibration of Buckled Beams
p.41

Thermodynamic Study for Venus Balloon
p.45

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 433-440Study on Thermal Fatigue Life Prediction of...

Study on Thermal Fatigue Life Prediction of Cylinder Head

Article Preview

Abstract:

Thermal fatigue tests were conducted on diesel engine cylinder heads of gray cast iron HT250 with conductive heating fatigue test rig. The thermal fatigue life is affected by the maximum temperature and heating time. The relationship between thermal fatigue life, temperature, and heating time was researched. Thermal fatigue life prediction model was derived from classical energy fatigue criteria. The parameters of the model were obtained from the results of the thermal fatigue test. The model and thermal fatigue test method are suitable for cylinder heads of cast irons and cast aluminum alloys, the parameters should be fixed by thermal fatigue test.

You might also be interested in these eBooks

Materials Science and Information Technology

Info:

Periodical:

Advanced Materials Research (Volumes 433-440)

Pages:

3-8

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.433-440.3

Citation:

Cite this paper

Online since:

January 2012

Authors:

Wei Mao Zhao, Wei Zheng Zhang

Keywords:

Cast Iron, Cylinder Head, Diesel Engine, Life Prediction, Thermal Fatigue

Export:

RIS, BibTeX

Price:

Permissions CCC:

Request Permissions

Permissions PLS:

Request Permissions

Сopyright:

© 2012 Trans Tech Publications Ltd. All Rights Reserved

Share:

Citation:

[1] Andrei Constantinescu, Eric Charkaluk, Guy Ledererc, Laetitia Verger, A computational approach to thermomechanical fatigue, International Journal of Fatigue, vol. 26, 2004, p.805–818, doi: 10. 1016/ j. ijfatigue. 2004. 01. 006.

DOI: 10.1016/j.ijfatigue.2004.01.006

[2] M. Angeloni, M.A. Colósio, O. Maluf, M. T. Milan, W.W. Bose Filho, High temperature fatigue properties of pearlitic gray cast irons employed in brake discs, 17th Brazilian Congress of Engineering and Materials Science and Engineering, Iguaca Brazil, pp.6836-6846, Nov. (2006).

DOI: 10.5772/13970

[3] Stefan Traminduction, Taner Gocmez, Stefan Pischinger, Thermomechanical fatigue life prediction of cylinder heads in combustion engines, Journal of Engineering for Gas Turbines and Power, vol. 130, Jan. 2008, doi: 10. 1115/1. 2771251.

DOI: 10.1115/1.2771251

[4] Martin Riedler, Heinz Leitner, Bernd Prillhofer, Gerhard Winter, Wilfried Eichlseder, Lifetime simulation of thermo-mechanically loaded Components, Meccanica, vol. 42, 2007, PP. 47–59, doi: 10. 1007/ s11012-006-9020-z.

DOI: 10.1007/s11012-006-9020-z

[5] Markus Bernd Grieb, Hans-Jürgen Christ, Burkhard Plege, Thermomechanical fatigue of cast aluminum alloys for cylinder head applications – experimental characterization and life prediction, Procedia Engineering, vol. 2, 2010, p.1767.

DOI: 10.1016/j.proeng.2010.03.190

[6] MATTOS J.J.I., UEHARA A.Y., SATO M., FERREIRA I., Fatigue properties and micromechanism of fracture of an AlSiMg0. 6 cast alloy used in diesel engine cylinder head, Procedia Engineering, vol. 2, 2010, p.759.

DOI: 10.1016/j.proeng.2010.03.082

[7] Tsuyoshi-Takahashi, Katsuhiko Sasaki, Low cycle thermal fatigue of aluminum alloy cylinder head in consideration of changing metrology microstructure, Procedia Engineering, vol. 2, 2010, p.767–776, doi: 10. 1016/j. proeng. 2010. 03. 083.

DOI: 10.1016/j.proeng.2010.03.083

[8] Shadan TABIBIAN, Eric CHARKALUK, Andrei CONSTANTINESCU, Alexis OUDIN, Fabien SZMYTKA, Behavior, damage and fatigue life assessment of lost foam casting aluminum alloys under thermo-mechanical fatigue conditions, Procedia Engineering, vol. 2, 2010, p.1145.

DOI: 10.1016/j.proeng.2010.03.124

[9] T. Beck, K. -H. Lang, D. Lohe, Thermal–mechanical fatigue behaviour of cast aluminium alloys for cylinder heads reinforced with 15 vol. % discontinous Al2O3 (Saffil) fibers, Materials Science and Engineering, A319–321, 2001, p.662.

DOI: 10.1016/s0921-5093(00)02022-0

[10] Hong-Wei Song, Shao-Xia Li, Ling Zhang, Gang Yu, Liang Zhou, Jian-Song Tan, Numerical simulation of thermal loading produced by shaped high power laser onto engine parts, Applied Thermal Engineering, vol. 30, 2010, p.553.

DOI: 10.1016/j.applthermaleng.2009.10.018

[11] Hong-Wei Song, Gang Yu, Jian-Song Tan, Liang Zhou, Xiao-Li Yu, Thermal fatigue on pistons induced by shaped high power laser. Part I: Experimental study of transient temperature field and temperature oscillation, International Journal of Heat and Mass Transfer, vol. 51, 2008, p.757.

DOI: 10.1016/j.ijheatmasstransfer.2007.04.035

[12] Hong-Wei Song, Gang Yu, Alexander F.H. Kaplan, Jian-Song Tan, Xiao-Li Yu, Thermal fatigue on pistons induced by shaped high power laser. Part II: Design of spatial intensity distribution via numerical simulation, International Journal of Heat and Mass Transfer, vol. 51, 2008, p.768.

DOI: 10.1016/j.ijheatmasstransfer.2007.04.034

[13] ZHANG Wei-zheng, LIU Jin-xiang, WEI Chun-yuan, A study on the life forecast for engine's heated parts based on thermal fatigue test damage, Transactions of CSICE, Vol. 20, Jan. 2002, pp.92-94. In Chinese.

[14] Fuchs, H.O. and Stephens, R.I., Metal fatigue in Engineering, John Wiley & sons, New York, (1980).

[15] Buch, A, Fatigue, Strength Calculation. TRANS TECH PUBLICATIONS, Switzerland, (1988).