The Finite Element Simulation of Lamb Wave Propagation in a Cracked Structure with Coupled Filed Elements

Abstract:

Crack detection by Piezoelectric Wafer Active Sensors (PWAS) is one of the emerging methods of Non-destructive Evaluation (NDE). These sensors can assess the health state of the structure in far filed through the analyzing the high frequency Lamb wave propagation. As PWAS is the essential part of this method, simulation and modeling of these sensors and their interaction with the host structure, strongly affect the accuracy of results. In this study, unlike the previous works, in which some certain areas of the host structure were considered as a sensor and actuator, the direct simulation of electro-mechanical interaction of the PWAS and the host structure is modeled among modeling the PWAS with a FEM coupled-field element. After verification of the FEM analysis with theoretical group velocity of S0 mode, capability of the S0 mode in crack detection was examined. Different length and angles of the crack in an aluminum plate modeled. The crack growth effect was defined among a damage index by using the strain energy magnitude that received by sensor localized behind the crack. The result showed that transmitted energy from the cracks decreases as the crack length increases. In addition, as the angle crack to the sensor increases, the ability of sensor to crack detection will increase.

• Periodical: Advanced Materials Research (Volumes 463-464)
• Pages: 618-623
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.463-464.618
• Online since: February 2012
• Authors: Samaneh Tashi, Ali Abedian, Romik Khajehtourian
• Keywords: Crack Detection, Finite Element Method (FEM), Lamb Wave, Non-Destructive Evaluation, Piezoelectric Wafer Active Sensor

References

[1] Ihn, J.B., Chang, F.K., 2002, Multicrack Growth Monitoring at Riveted Lap Joints Using Piezoelectric Patches, in 7th Annual International Symposium on Non-destructive Evaluation for Health Monitoring and Diagnostics, March 17–21, San Diego, CA, Proceedings of the SPIE, Vol. 4702, 29–40.

DOI: 10.1117/12.469893

[2] Giurgiutiu, V., Bao, J., 2002, Embedded Ultrasonic Structural Radar for the Non-destructive Evaluation of Thin-wall Structures, in Proceedings of the 2002 ASME International Mechanical Engineering Congress, November 17–22, New Orleans, LA, paper IMECE2002-39017.

DOI: 10.1115/imece2002-33873

[3] Giurgiutiu, V., Cuc A., 2005, Embedded Non-destructive Evaluation for Structural Health Monitoring, Damage Detection, and Failure Prevention, The Shock and Vibration Digest.

DOI: 10.1177/0583102405052561

[4] Giurgiutiu, V., Yu, L., Kendall, J., Jenkins, C., 2007, In situ imaging of crack growth with piezoelectric wafer active sensors, AIAA Journal, Vol. 45, No. 11, pp.2758-2769.

DOI: 10.2514/1.30798

[5] Liu, W., Giurgiutiu, V., 2007, Finite Element Simulation of Piezoelectric Wafer Active Sensors for Structural Health Monitoring with Coupled-Filed Elements, Proc. of SPIE Vol. 6529 65293R-1.

DOI: 10.1117/12.715238

[6] Lu, Y., Yu, L., 2008, Quantitative assessment of through-thickness crack size based on Lamb wave scattering in aluminum plates, Science Direct- NDT&E International 41 59–68.

DOI: 10.1016/j.ndteint.2007.07.003

[7] Diligent O, Grahn T, Bostrom A, Cawley P, Lowe MJS, 2002, The low-frequency reflection and scattering of the S0 Lamb mode from a circular through-thickness hole in a plate: finite element, analytical and experimental studies,. J AcoustSoc Am; 112(6): 2589–601.

DOI: 10.1121/1.1512292

[8] Demma A, Cawley P, Lowe MJS, Roosenbrand AG, (2003) The reflection of the fundamental torsional mode from cracks and notches in pipes,. J AcoustSoc Am; 114(2): 611–25.

DOI: 10.1121/1.1582439

[9] Santoni, G. B.; Yu, L.; Xu, B.; Giurgiutiu, V., 2007, Lamb Wave Mode Tuning of piezoelectric Wafer Active Sensors for Structural Health, ASME Journal of Vibration and Acoustics, Vol. 129, No. 6, pp.752-762.

DOI: 10.1115/1.2748469

[10] Giurgiutiu, V., 2008, Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Elsevier Academic Press, 760 pages, ISBN 978-0120887606.