The Design and Application of the Ultra-Thick Abrasion Resistant Flux-Cored Wire

Abstract:

In this paper, a type of high efficient ultra-thick high-chromium cast iron surfacing flux-cored wire of a diameter of 6mm is designed to solve the technological problem that the processing property of ultra-thick flux-cored wire can not meet the welding requirement, and “inter twist connection” and “inner wire” technologies were adopted. The effect of alloying elements Cr and C in the powder on the microstructure and property of deposited metal was researched. The results showed that when Cr content is 39% and C content is 5.7% in the powder, the microstructure of deposited metal is nearly eutectic, of which the hardness and wear resistance are higher. The test of engineering application of surfacing was carried out on bucket in wheel loader. It is proved that the wear-resisting property and the service life of the bucket can be significantly improved.

• Periodical: Advanced Materials Research (Volume 507)
• Pages: 127-131
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.507.127
• Online since: April 2012
• Authors: Jun Sheng Sun, En Li Jiao, Hao Meng Wang, Yi Qun Sun
• Keywords: Application, Design, Hardfacing, Ultra-Thick Flux-Cored Wire

References

[1] EL Mansori and Nuoari: Int. J. Machine Tools and Manufacture Vol. 47(2007), p.1715.

[2] G.R. Huo, B.K. Zhu and R.G. Yao: Hot Working Technol. Vol. 36(2007), p.27(In Chinese).

[3] H.H. Ando: Phenomena of Welding Arc(Mechanical Industry Press, China 1985)(In Chinese).