Characterizations of Electron Beam Evaporated Silicon Thin Films on Plastic Substrates for Solar Cells Applications

Abstract:

Samples of thin film silicon (Si) on low cost polyethylene terephthalate (PET) plastic substrates were prepared by electron beam (e-beam) evaporation technique. Five samples of different thicknesses were deposited. Structural, optical, surface morphology and electrical characterizations were then carried out on these samples by energy dispersion X-ray (EDX) spectroscopy, high resolution X-ray diffraction (HR-XRD), UV spectrophotometer, atomic force microscopy (AFM) and four-probe meter. EDX spectra for these as-evaporated Si thin films on PET showed that the peak at 1.7398 eV belongs to Si atom which confirms the existence of the Si thin film layer. HR-XRD result showed that the chosen sample was highly amorphous. The transmission and reflection were carried out from wavelength 200 nm to 2000 nm and the optical band gap of the samples was calculated by Taucs relations. The root mean square (RMS) of surface roughness was low (smooth morphology) and found to be independent to the thickness of the film. The films were found to be highly resistive due to their intrinsic nature (no doping applied during the deposition). The effects of the properties towards thin film solar cells fabrication were subsequently discussed.

• Periodical: Advanced Materials Research (Volume 925)
• Pages: 543-547
• DOI: https://doi.org/10.4028/www.scientific.net/AMR.925.543
• Online since: April 2014
• Authors: P.C. Ang*, K. Ibrahim, M.Z. Pakhuruddin
• Keywords: Electron Beam Evaporation, Polyethylene Terephthalate, Thin Film Solar Cells

References

[1] M. A. Green, Consolidation of thin-film photovoltaic technology: The coming decade of opportunity. Progress in Photovoltaics: Research and Applications. 14 (2006) 383–392.

DOI: 10.1002/pip.702

[2] Z. Ouyang (2011) Electron-beam evaporated polycrystalline silicon thin-film solar cells: Paths to better performance. PhD thesis. University of New South Wales.

[3] El-Farahaty, K. A, Sadik, A. M., Hezma, A. M., International Journal of Polymeric Materials 2007, 56, 715.

[4] J. Nelson, The Physics of Solar Cells, Imperial College Press, London, (2003).

[5] E.R. Shaaban, I.S. Yahia, E.G. El-Metwally, Validity of Swanepoel's method for calculating the optical constants of thick films. Acta Physica Polonica A. 121 (2012) 628-635.

DOI: 10.12693/aphyspola.121.628

[6] Greg P. Smestad, Optoelectronics of Solar Cells, SPIE Press, Washington, (2002).

[7] J. Tauc, Amorphous and liquid semiconductors, Plenum Press, New York, (1974).

[8] W. Shockley and H. J. Queisser, Detailed balance limit of efficiency of p-n junction solar cells. J. Appl. Phys. 32 (1961) 510-519.

DOI: 10.1063/1.1736034

[9] O. Kunz (2009) Evaporated solid-phase crystallised poly-silicon thin film solar cells on glass. PhD thesis. University of New South Wales.

[10] Zumin Wang, L. P. H. Jeurgens, Jiang Y. Wang, E. J. Mittemeijer, Fundamentals of metal-induced crystallization of amorphous semiconductors. Advanced Engineering Materials. 11 (2009) 131-135.

DOI: 10.1002/adem.200800340

[11] J. Y. Wang, D. He, Y. H. Zhao, E. J. Mittemeijer, Wetting and crystallization at grain boundaries: Origin of aluminum-induced crystallization of amorphous silicon. Applied Physics Letters. 88 (2006) 061910.

DOI: 10.1063/1.2172707

[12] M. S. Haque, H. A. Naseem, W. D. Brown, Interaction of aluminum with hydrogenated amorphous silicon at low temperatures. Physical Review B. 77 (2008) 045424.