[1]
K.Hirano, S.Tanaka and M.Esashi, Aluminum Nitride Lamb Wave Resonator Using Germanium Sacrificial Layer, Proc. of the 25th Sensor Symposium, (2008) pp.195-198.
Google Scholar
[2]
K.Matsuo, M.Moriyama, M.Esashi and S.Tanaka, Low-voltage PZT-actuated MEMS Switch Mobolithically Integrated with CMOS Circuit, Tech. Digest IEEE MEMS 2012, (2012). pp.1153-1156.
DOI: 10.1109/memsys.2012.6170367
Google Scholar
[3]
T.Matsumura, M.Esashi, H.Harada and S.Tanaka, Multi-band Radio-frequency Filter Fabricated Using Polyimide-based Membrane Transfer Bonding Technology, J. of Micromech. Microeng., 20, (2010). 095027(9pp).
DOI: 10.1088/0960-1317/20/9/095027
Google Scholar
[4]
K.D. Park, M.Esashi and S.Tanaka, Wafer-level Heterointegration Process for SAW Devices on LSI, 2010 IEEE Ultrasonics Symposium, (2010) pp.100-101.
DOI: 10.1109/ultsym.2010.5935651
Google Scholar
[5]
H.Yanagida, S.Yoshida, M.Esashi and S.Tanaka, Simple Removal Technology Using Ozone Solution for Chemically-stable Polymer Used for MEMS, Tech. Digest IEEE MEMS 2011, (2011) pp.324-327.
DOI: 10.1109/memsys.2011.5734427
Google Scholar
[6]
T.Murakoshi, Y.Endo, K.Sigeru, S.Nakamura and M.Esashi, Electrostatically Levitated Ring-Shaped Rotational-Gyro/Accelerometer, Jpn. J. Appl. Phys., 42, (2003) pp.2468-2472.
DOI: 10.1143/jjap.42.2468
Google Scholar
[7]
A.B. Randles, J.H. Kuypers, S.Tanaka and M.Esashi, Application of Lithium Niobate Etch Stop Technology to SAW Pressure Sensors, Proc. 2008 IEEE International Ultrasonic Symposium, (2008) pp.1124-1127.
DOI: 10.1109/ultsym.2008.0271
Google Scholar
[8]
S.Hashimoto, J.H. Kuypers, S.Tanaka and M.Esashi, Design and Fabrication of Passive Wireless SAW Sensor for Pressure Measurement, IEEJ Trans., 128-E, (2008) pp.231-234.
DOI: 10.1541/ieejsmas.128.230
Google Scholar
[9]
N.Asada, H.Matsuki, K.Minami and M.Esashi, Silicon Micromachined Two-Dimensional Galvano Optical Scanner, IEEE Trans. on Magnetics, 30, (1994) pp.4647-4649.
DOI: 10.1109/20.334177
Google Scholar
[10]
T.Saito, T.Matsubara, Y.Ikemoto and K.Sasagawa, Application of 3D Imaging Sensor to Railway Service, Japan Signal Tech. Report, 34, (2010) pp.31-36 (in Japanese).
Google Scholar
[11]
M.Makihata, S.Tanaka, M.Muroyama, S.Matsuzaki, H.Yamada, N.Nakayama, U.Yamaguchi, Y.Nonomura, M.Fujiyoshi and M.Esashi, Adhesive Wafer Bonding Using a Molded Thick Benzocyclobutene Layer for Wafer-level Integration of MEMS and LSI, J. of Micromech. Microeng., 21, (2011). 085002 (7pp).
DOI: 10.1088/0960-1317/21/8/085002
Google Scholar
[12]
M.Esashi, Wafer Level Packaging of MEMS, J. of Micromech. and Microeng., 18, (2008) 073001(13pp).
DOI: 10.1088/0960-1317/18/7/073001
Google Scholar
[13]
Y.Matsumoto, S.Shoji and M.Esashi, A Miniature Integrated Capacitive Pressure Sensor, Extended Abstracts of the 22nd Conference on Solid State Devices and Materials, (1990) pp.701-704.
DOI: 10.7567/ssdm.1990.d-9-6
Google Scholar
[14]
H.Miyashita. and Y.Kitamura, Micromachined Capacitive Diaphragm Gauge, Anelva Technical Report, 11, (2005) pp.37-41 (in Japanese).
Google Scholar
[15]
A,Nakamura, F.Takayanagi, Y.Moro, H.Sanpei, M.Onozawa and M.Esashi, Development of RF MEMS Switch, Advantest Technical Report, 22, (2004) pp.9-16 (in Japanese).
Google Scholar
[16]
S.Tanaka, S.Matsuzaki, M.Mohri, A.Okada, H.Fukushi and M.Esashi Wafer-level Hermetic Packaging Technology for MEMS Using Anodically-bondable LTCC Wafer, Tech. Digest IEEE MEMS 2011, (2011). pp.376-379
DOI: 10.1109/memsys.2011.5734440
Google Scholar
[17]
S.Matsuzaki, S.Tanaka, T.Baba and M.Esashi, Development of a Wafer Bonder for Metal-to-Metal Bonding , The 28th Sensor Symposium on Sensors, Micromachines and Applied Systems, (2011) p.63.
Google Scholar
[18]
S.Tanaka, M.Mohri, A.Okada, H.Fukushi and M.Esashi, Versatile Wafer-Level Hermetic Packaging Technology Using Anodically-Bondable LTCC Wafer with Compliant Porous Gold Bump Spontaneously Formed in Wet-Etched Cavities, Tech. Digest IEEE MEMS 2012, (2012). pp.369-372.
DOI: 10.1109/memsys.2012.6170211
Google Scholar
