Salt Degradation in Stone of Old Buildings

Abstract:

The crystallization of soluble salts is a major mechanism of degradation of some building materials, including stone. This mechanism of deterioration is based on the pressure exerted by the formation of salt structures in porous materials, with increased volume and is dependent on the type of salts involved and the size and arrangement of pores. When the pressure exceeds the internal strength of the material, and particularly when the salt formations undergo cycles of crystallization and dissolution in response to fluctuating levels of humidity, the deterioration of materials typically becomes apparent. It is therefore essential to understand the phenomenon of crystallization and dissolution of salts, i.e., to know the conditions of crystallization of each salt, depending on relative humidity and air temperature. For this purpose we developed an experimental work, using four samples of stone (one limestone and three granites), which consists, initially, to study the variation of the water absorption coefficient with and without soluble salts.

• Periodical: Defect and Diffusion Forum (Volumes 334-335)
• Pages: 337-342
• DOI: https://doi.org/10.4028/www.scientific.net/DDF.334-335.337
• Online since: February 2013
• Authors: João M.P.Q. Delgado, V.P. de Freitas
• Keywords: Crystallization, Degradation Mechanisms, Dissolution, Humidity, Soluble Salts, Water Absorption Coefficient

References

[1] J. Crank: The Mathematics of Diffusion (Oxford Science, New York 1975).

[2] H.M. Künzel, A.N. Karagiozis and A. Holm: WUFI-ORNL/IBP A- Hygrothermal Design Tool for Architects and Engineers (ASTM Manual 40 in Moisture Analysis of Buildings, 2001).

DOI: 10.1520/mnl10412m

[3] M. Krus: Moisture Transport and Storage Coefficients of Porous Mineral Building Materials. Theoretical Principles and New Test Methods (Fraunhofer IRB Verlag, Germany, 1996).

[4] M.K. Kumaran: J. Build. Phys. Vol. 22 (1999), p.349.

[5] DIN 4108-4: Thermal Insulation in Buildings - Part 4: Characteristic Values Relating to Thermal Insulation and Protection Against Moisture (Germany, 1995).

[6] CEN: Thermal Performance of Buildings and Building Components - Determination of Water Absorption Coefficient (TC 89/WG10 N70, 1994).

[7] P. Mukhopadhyaya, P. Goudreau, K. Kumaran and N. Normandin: Effect of Surface Temperature on Water Absorption Coefficient of Building Materials (Institute for Research in Construction, Report NRCC-45369, National Research Council, Ottawa, Canada, 2002).

DOI: 10.1177/0075424202026002974

[8] J.M. Sousa and V.P. de Freitas: Characterization of the Capillarity Coefficient and Liquid Permeability of Façade Coating Materials (Building Materials Meeting - Innovation and Quality, ISMAG, Lisbon, Portugal, 1997).